MEAN WELL RSP-1500-48
Description
Mean Well RSP-1500-48 Power Supplies-1500W, 48V Single Output Power Supply
Part Number
RSP-1500-48
Price
Request Quote
Manufacturer
MEAN WELL
Lead Time
Request Quote
Category
POWER SUPPLY
Specifications
AC CURRENT (Typ.)
17A/115VAC 8A/230VAC
CURRENT RANGE
0 ~ 32A
DC VOLTAGE
48V
DIMENSION
278*127*83.5mm (L*W*H)
EFFICIENCY (Typ.)
91%
FREQUENCY RANGE
47~63Hz
HOLD UP TIME (Typ.)
16ms at full load
INRUSH CURRENT (Typ.)
30A/115VAC 60A/230VAC
LINE REGULATION
0.5%
LOAD REGULATION
0.5%
OVER LOAD
105 ~135% rated output power
Protection type : Constant current limiting unit will shut down o/p voltage after 5sec. Re-power on to recover
OVER VOLTAGE
57.6 ~ 67.2V
Protection type : Shut down o/p voltage, re-power on to recover
POWER FACTOR (Typ.)
0.95/230VAC 0.98/115VAC at full load
RATED CURRENT
32A
RATED POWER
1536W
RIPPLE & NOISE (max.)
200mVp-p
SETUP, RISE TIME
1500ms, 100ms at full load
VOLTAGE ADJ. RANGE
43 ~ 56V
VOLTAGE RANGE
90 ~ 264VAC 127 ~ 370VDC
VOLTAGE TOLERANCE
1.0%
Features
- AC input active surge current limiting
- Alarm signal output
- Built-in 12V/0.1A auxiliary output for remote control
- Built-in active PFC function,PF>0.95
- Built-in remote ON-OFF control
- Built-in remote sense function
- Current sharing up to 6000W(3+1)
- Forced air cooling by built-in DC ball bearing fan
- High efficiency up to 91%
- High power density 8.3W/inch
- Output voltage can be trimmed between 70~100% of the rated output voltage
- Protections: Short circuit / Overload / Over voltage / Over temperature
- Universal AC input/Full range
- ZVS new technology
Datasheet
Extracted Text
1500W Single Output Power Supply RSP-1500 series Features : Universal AC input/Full range ZVS new technology AC input active surge current limiting High efficiency up to 91% Built-in active PFC function,PF>0.95 Protections: Short circuit / Overload / Over voltage / Over temperature Forced air cooling by built-in DC ball bearing fan Output voltage can be trimmed between 70~100% of the rated output voltage 3 High power density 8.3W/inch Current sharing up to 6000W(3+1) Alarm signal output Built-in 12V/0.1A auxiliary output for remote control Built-in remote ON-OFF control Built-in remote sense function 3 years warranty SPECIFICATION MODEL RSP-1500-5 RSP-1500-12 RSP-1500-15 RSP-1500-24 RSP-1500-27 RSP-1500-48 DC VOLTAGE 5V 12V 15V 24V 27V 48V RATED CURRENT 240A 125A 100A 63A 56A 32A CURRENT RANGE 0 ~ 240A 0 ~ 125A 0 ~ 100A 0 ~ 63A 0 ~ 56A 0 ~ 32A RATED POWER 1200W 1500W 1500W 1512W 1512W 1536W RIPPLE & NOISE (max.) Note.2 150mVp-p 150mVp-p 150mVp-p 150mVp-p 150mVp-p 200mVp-p OUTPUT VOLTAGE ADJ. RANGE 4.5 ~ 5.5V 10 ~ 13.5V 13.5 ~ 16.5V 20 ~ 26.4V 24 ~ 30V 43 ~ 56V VOLTAGE TOLERANCE Note.3 2.0% 1.0% 1.0% 1.0% 1.0% 1.0% LINE REGULATION 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% LOAD REGULATION 2.0% 0.5% 0.5% 0.5% 0.5% 0.5% SETUP, RISE TIME 1500ms, 100ms at full load HOLD UP TIME (Typ.) 10ms at full load 14ms at full load 16ms at full load VOLTAGE RANGE 90 ~ 264VAC 127 ~ 370VDC FREQUENCY RANGE 47~63Hz POWER FACTOR (Typ.) 0.95/230VAC 0.98/115VAC at full load INPUT EFFICIENCY (Typ.) 80% 87% 87% 90% 90% 91% AC CURRENT (Typ.) 17A/115VAC 8A/230VAC INRUSH CURRENT (Typ.) 30A/115VAC 60A/230VAC LEAKAGE CURRENT <2.0mA / 240VAC 105 ~135% rated output power OVERLOAD Note.5 Protection type : Constant current limiting unit will shut down o/p voltage after 5sec. Re-power on to recover 5.75 ~ 6.75V 13.8 ~ 16.8V 17 ~ 20.5V 27.6 ~ 32.4V 31 ~ 36.5V 57.6 ~ 67.2V PROTECTION OVER VOLTAGE Protection type : Shut down o/p voltage, re-power on to recover 95 5 (TSW2 ) detect on heatsink of power transistor OVER TEMPERATURE Protection type : Shut down o/p voltage, recovers automatically after temperature goes down 12V@0.1A(Only for Remote ON/OFF control) AUXILIARY POWER(AUX) Please see the Function Manual REMOTE ON/OFF CONTROL Please see the Function Manual FUNCTION ALARM SIGNAL OUTPUT Please see the Function Manual OUTPUT VOLTAGE TRIM Please see the Function Manual CURRENT SHARING -20 ~ +70 (Refer to "Derating Curve") WORKING TEMP. 20~90% RH non-condensing WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +85 , 10 ~ 95% RH TEMP. COEFFICIENT 0.05%/ (0 ~ 50 ) VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes SAFETY STANDARDS UL60950-1, TUV EN60950-1 approved WITHSTAND VOLTAGE I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH EMC (Note 4) EMC EMISSION Compliance to EN55022 (CISPR22), EN61000-3-2,-3 EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level, criteria A MTBF 62.6K hrs min. MIL-HDBK-217F (25 ) OTHERS DIMENSION 278*127*83.5mm (L*W*H) 3.0Kg; 4pcs/13Kg/1.19CUFT PACKING 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. NOTE 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on http://www.meanwell.com) 5. Derating may be needed under low input voltages. Please check the derating curve for more details. File Name:RSP-1500-SPEC 2011-12-19 1500W Single Output Power Supply RSP-1500 series Mechanical Specification Case No.943A Unit:mm 240 11.2 16 max. 38 8-M4 L=5(Both Sides) 278 240 11.2 OUTPUT +V 4-M4 L=5 -V CN1 CN2 CN3 8 6 4 2 8 6 4 2 6 4 2 7 5 3 1 7 5 3 1 5 3 1 Air flow I/P LED direction SVR 1 2 3 AC Input Terminal Pin No. Assignment Control Pin No. Assignment(CN1,CN2) : HRS DF11-8DP-2DS or equivalent Pin No. Assignment Pin No. Assignment Pin No. Assignment Mating Housing Terminal 1 FG 1 RCG 4 TRIM HRS DF11-8DS HRS DF11-**SC 2 AC/N 2 RC2 LS(Current Share) 6 or equivalent or equivalent 3 AC/L 3,5,7 -S 8 +S RCG: Remote ON/OFF Ground TRIM: Adjustment of Output Voltage RC2: Remote ON/OFF LS: Load Share -S : -Remote Sensing +S: +Remote Sensing Control Pin No. Assignment(CN3) : HRS DF11-6DP-2DS or equivalent Pin No. Assignment Pin No. Assignment Mating Housing Terminal P OK GND AUXG 1 4 HRS DF11-6DS HRS DF11-**SC 2 P OK 5 RC1 or equivalent or equivalent 3 RCG 6 AUX P OK GND: Power OK Ground AUXG: Auxiliary Ground P OK: Power OK Signal RC1: Remote ON/OFF RCG: Remote ON/OFF Ground AUX: Auxiliary Output PFC fosc : 70KHz Block Diagram PWM fosc : 100KHz +S ACTIVE RECTIFIERS RECTIFIERS EMI POWER +V INRUSH I/P & & CURRENT FILTER SWITCHING -V FILTER LIMITING PFC -S PFC O.V.P. CONTROL O.L.P. PWM DETECTION CONTROL O.T.P. CIRCUIT P OK REMOTE RC LOAD CONTROL SHARING LS FAN AUX RECTIFIERS POWER AUX POWER & FILTER (12V/0.1A) File Name:RSP-1500-SPEC 2011-12-19 127 83.5 93 17.5 38.1 22.7 13 10 4 16 1500W Single Output Power Supply RSP-1500 series Derating Curve Static Characteristics 100 Others +12V,+15V 80 100 60 90 50 +5V 80 40 70 20 60 -20 0 10 20 30 40 45 50 60 70 (HORIZONTAL) 90 100 120 140 150 160 180 200 220 240 264 AMBIENT TEMPERATURE ( ) INPUT VOLTAGE (V) 60Hz Function Manual 1.Remote ON/OFF (1)Remote ON/OFF control becomes available by applying voltage in CN1 & CN2 & CN3 (2)Table 1.1 shows the specification of Remote ON/OFF function (3)Fig.1.2 shows the example to connect Remote ON/OFF control function Table 1.1 Specification of Remote ON/OFF Connection Method Fig. 1.2(A) Fig. 1.2(B) Fig. 1.2(C) Output on SW Open SW Open SW Close SW Logic Output off SW Close SW Close SW Open Fig.1.2 Examples of connecting remote ON/OFF (A)Using external voltage source (B)Using internal 12V auxiliary output AUX AUX 2.2K 2.2K RC1 RC1 5V 150 150 RC2 RC2 12V typ. 12V typ. 620 SW RCG RCG SW AUXG AUXG (C)Using internal 12V auxiliary output AUX 2.2K RC1 150 RC2 12V typ. SW RCG AUXG File Name:RSP-1500-SPEC 2011-12-19 LOAD (%) LOAD (%) 1500W Single Output Power Supply RSP-1500 series 2.Alarm Signal Output POK (1)Alarm signal is sent out through "P OK" & "P OK GND" pins (2)An external voltage source is required for this function. The maximum applied voltage is 50V and the maximum sink current is 10mA R (3)Table 2.1 explain the alarm function built-in the power supply 0.1uF 100K V Function Description Output of alarm(P OK) The signal is "Low" when the power supply is above Low 65% of the rated output voltage-Power OK (0.5V max at 10mA) POK High or open The signal turns to be "High" when the power supply POK GND External voltage and R (External applied voltage is under 65% of the rated output voltage-Power Fail 10mA max.) (The max. Sink is 10mA and 50V) Fig. 2.2 Internal circuit of P OK (Open collector method) Table 2.1 Explanation of alarm 3.Output Voltage TRIM (1)Adjustment of output voltage is possible between 70~100%(Typ.) of the rated output which is shown in Fig. 3.1 (2)Connecting a resistor externally between TRIM and-S on CN1 or CN2 that is shown in Fig. 3.2. (3)+S & +V, -S & -V also need to be connected on CN1 or CN2. Vout +S 100% +V LOAD -V 90% -S 80% TRIM R(0.5W) 70% -S R 0 470 1.8K OPEN Fig. 3.2 Output voltage trimming Fig. 3.1 External Resistor (Typical) 4.Current Sharing (1)Parallel operation is available by connecting the units shown as below No.1(Master) (+S,-S and LS are connected mutually in parallel): V+ +S (2)The voltage difference among each output should be minimized that less than 2% is required -S CN1 LS (3)The total output current must not exceed the value determined by the following equation V- +S -S CN2 (Output current at parallel operation)=(The rated current per unit) x (Number of unit) x 0.9 LS (4) In parallel operation 4 units is the maximum, please consult the manufacture for other AC/L AC/N applications (5) When remote sensing is used in parallel operation, the sensing wire must be connected only to the master unit No.2(Slave) V+ +S -S CN1 LS V- +S -S CN2 LS AC/L AC/N +S +V Load No.3(Slave) -V -S V+ +S -S CN1 LS V- +S -S CN2 LS AC/L AC/N No.4(Slave) V+ +S -S CN1 LS V- +S -S CN2 LS AC/L AC/N File Name:RSP-1500-SPEC 2011-12-19
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the RSP-1500-48 have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
Mean Well ES18U09-P1J Power Supply 18W; 9.0V@2.00A; 2.1*5.5*11/C+/6F1185 (79x54x33 mm) Wallmount Enc...
Mean Well ES25B48-P1J Power Supply - 25W; 48V@0.52A; 2.1*5.5*11/C+/6F1185 (79 x 54 x 33mm) Desktop E...
Manufacturers





What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods