MEAN WELL QP-375-5B
Specifications
AC CURRENT (Typ.)
6A/115VAC 3A/230VAC
CURRENT RANGE
3.5 ~ 40A ,0 ~ 16A, 0 ~ 6A ,0 ~ 3A
DC VOLTAGE
5V, +12V, 12V ,5V
DIMENSION
280*127*63.5mm (L*W*H)
EFFICIENCY (Typ.)
77%
FREQUENCY RANGE
47 ~ 63Hz
HOLD UP TIME (Typ.)
36ms at full load
INRUSH CURRENT (Typ.)
COLD START 45A
LINE REGULATION
0.5% ,0.5% ,0.5%, 0.5%
LOAD REGULATION
0.8% ,0.8%, 0.8%, 0.8%
OVER LOAD
105 ~ 135% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed
OVER VOLTAGE
CH1:5.75 ~ 6.75V
Protection type : Shut down o/p voltage, re-power on to recover
POWER FACTOR (Typ.)
PF>0.95/230VAC PF>0.98/115VAC at full load
RATED CURRENT
30A ,10A, 6A ,3A
RATED POWER
357W
RIPPLE & NOISE (max.)
100mVp-p ,120mVp-p, 120mVp-p ,50mVp-p
SETUP, RISE TIME
800ms, 50ms at full load
VOLTAGE ADJ. RANGE
4.75 ~ 5.5V ,11.4 ~ 13.2V ,11.4 ~ 13.2V
VOLTAGE RANGE
85 ~ 264VAC 120 ~ 370VDC
VOLTAGE TOLERANCE
1.0%, 1.0% ,1.0%, 1.0%
Features
- All output can be adjustable from -5~+10%
- Built-in active PFC function, PF>0.95
- Built-in remote ON-OFF control
- CH3,4 are isolated from other outputs and the polarity can be reversed
- Fixed switching frequency at 100KHz
- Forced air cooling by built-in DC fan
- No minimum load requirement for CH2,3,4
- Protections: Short circuit / Overload / Over voltage / Over temperature
- Universal AC input / Full range
- With power good and fail signal output
Datasheet
Extracted Text
375W Quad Output with PFC Function Q P- 375 s e ri e s Features : Universal AC input / Full range Built-in active PFC function, PF>0.95 Protections: Short circuit / Overload / Over voltage / Over temperature Forced air cooling by built-in DC fan CH3,4 are isolated from other outputs and the polarity can be reversed No minimum load requirement for CH2,3,4 All output can be adjustable from -5~+10% With power good and fail signal output Built-in remote ON-OFF control Fixed switching frequency at 100KHz 3 years warranty .. SPECIFICATION MODEL QP-375-5A QP-375-5B QP-375-5C OUTPUT NUMBER CH1 CH2 CH3 CH4 CH1 CH2 CH3 CH4 CH1 CH2 CH3 CH4 DC VOLTAGE +5V +12V 12V 12V +5V +12V 12V 5V +5V +12V 15V 15V RATED CURRENT 30A 10A 6A 3A 30A 10A 6A 3A 30A 9A 4A 4A CURRENT RANGE 3.5 ~ 40A 0 ~ 16A 0 ~ 6A 0 ~ 3A 3.5 ~ 40A 0 ~ 16A 0 ~ 6A 0 ~ 3A 3.5 ~ 40A 0 ~ 16A 0 ~ 4A 0 ~ 4A RATED POWER(max.) 378W 357W 378W RIPPLE & NOISE (max.) Note.2 100mVp-p 150mVp-p 150mVp-p 50mVp-p 100mVp-p 120mVp-p 120mVp-p 50mVp-p 100mVp-p 150mVp-p 150mVp-p 240mVp-p OUTPUT VOLTAGE ADJ. RANGE 4.75 ~ 5.5V 11.4 ~ 13.2V 11.4 ~ 13.2V 11.4 ~ 13.2V 4.75 ~ 5.5V 11.4 ~ 13.2V 11.4 ~ 13.2V ------ 4.75 ~ 5.5V 11.4 ~ 13.2V 14.3 ~ 16.5V 14.3 ~ 16.5V VOLTAGE TOLERANCE Note.3 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% LINE REGULATION 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% LOAD REGULATION 0.8% 0.8% 0.8% 0.8% 0.8% 0.8% 0.8% 0.8% 0.8% 0.8% 0.8% 0.8% SETUP, RISE TIME 800ms, 50ms at full load HOLD UP TIME (Typ.) 36ms at full load VOLTAGE RANGE Note.7 85 ~ 264VAC 120 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF>0.95/230VAC PF>0.98/115VAC at full load INPUT EFFICIENCY (Typ.) 77% 77% 77% AC CURRENT (Typ.) 6A/115VAC 3A/230VAC INRUSH CURRENT (Typ.) COLD START 45A LEAKAGE CURRENT <2mA / 240VAC 105 ~ 135% rated output power OVERLOAD Protection type : Hiccup mode, recovers automatically after fault condition is removed CH1:5.75 ~ 6.75V PROTECTION OVER VOLTAGE Protection type : Shut down o/p voltage, re-power on to recover 80 5 (TSW1) Detect on heatsink of Q1,Q2 power transistor) OVER TEMPERATURE Protection type : Shut down o/p voltage, recovers automatically after temperature goes down POWER GOOD / POWER FAIL(OPTIONAL) 10ms/1ms FUNCTION RC+/RC-:0 ~ 0.8V POWER ON; 4V ~ 10V POWER OFF REMOTE CONTROL -10 ~ +60 (Refer to "Derating Curve") WORKING TEMP. 20 ~ 90% RH non-condensing WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY -20 ~ +85 , 10 ~ 95% RH TEMP. COEFFICIENT 0.03%/ (0~50 ) VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes SAFETY STANDARDS UL60950-1, TUV EN60950-1 approved WITHSTAND VOLTAGE I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH EMC (Note 4) EMC EMISSION Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3 EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level, criteria A MTBF 75.9K hrs min. MIL-HDBK-217F (25 ) OTHERS DIMENSION 280*127*63.5mm (L*W*H) 2.4Kg; 6pcs/14.8Kg/0.89CUFT PACKING 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. NOTE 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on http://www.meanwell.com) 5. Peak current can not exceed 60 sec. 6. Isolated CH3 & CH4 maybe series connected or can be used as positive or negative outputs. 7. Derating may be needed under low input voltages. Please check the derating curve for more details. File Name:QP-375-SPEC 2011-08-19 375W Quad Output with PFC Function Q P-375 s e ri e s Features : Universal AC input / Full range Built-in active PFC function, PF>0.95 Protections:Short circuit / Overload / Over voltage / Over temperature Forced air cooling by built-in DC fan CH3,4 are isolated from other outputs and the polarity can be reversed No minimum load requirement for CH2,3,4 All output can be adjustable from -5~+10% With power good and fail signal output Built-in remote ON-OFF control Fixed switching frequency at 100KHz 3 years warranty .. SPECIFICATION MODEL QP-375-5D QP-375-5E OUTPUT NUMBER CH1 CH2 CH3 CH4 CH1 CH2 CH3 CH4 DC VOLTAGE +5V +12V 12V 24V +5V +12V 24V 24V RATED CURRENT 30A 9A 4A 3A 30A 9A 3A 2A CURRENT RANGE 3.5 ~ 40A 0 ~ 16A 0 ~ 6A 0 ~ 3A 3.5 ~ 40A 0 ~ 16A 0 ~ 4A 0 ~ 3A RATED POWER(max.) 378W 378W RIPPLE & NOISE (max.) Note.2 100mVp-p 120mVp-p 120mVp-p 240mVp-p 100mVp-p 120mVp-p 120mVp-p 240mVp-p OUTPUT VOLTAGE ADJ. RANGE 4.75 ~ 5.5V 11.4 ~ 13.2V 11.4 ~ 13.2V 22.8 ~ 26.4V 4.75 ~ 5.5V 11.4 ~ 13.2V 22.8 ~ 26.4V 22.8 ~ 26.4V VOLTAGE TOLERANCE Note.3 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% LINE REGULATION 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% LOAD REGULATION 0.8% 0.8% 0.8% 0.8% 0.8% 0.8% 0.8% 0.8% SETUP, RISE TIME 800ms, 50ms at full load HOLD UP TIME (Typ.) 36ms at full load VOLTAGE RANGE Note.7 85 ~ 264VAC 120 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF>0.95/230VAC PF>0.98/115VAC at full load EFFICIENCY (Typ.) 78% 78% INPUT AC CURRENT (Typ.) 6A/115VAC 3A/230VAC INRUSH CURRENT (Typ.) COLD START 45A LEAKAGE CURRENT <2mA / 240VAC 105 ~ 135% rated output power OVERLOAD Protection type : Hiccup mode, recovers automatically after fault condition is removed CH1:5.75 ~ 6.75V PROTECTION OVER VOLTAGE Protection type : Shut down o/p voltage, re-power on to recover 80 5 (TSW1) Detect on heatsink of Q1,Q2 power transistor) OVER TEMPERATURE Protection type : Shut down o/p voltage, recovers automatically after temperature goes down 10ms/1ms POWER GOOD / POWER FAIL(OPTIONAL) FUNCTION RC+/RC-:0 ~ 0.8V POWER ON; 4V ~ 10V POWER OFF REMOTE CONTROL -10 ~ +60 (Refer to "Derating Curve") WORKING TEMP. 20 ~ 90% RH non-condensing WORKING HUMIDITY -20 ~ +85 , 10 ~ 95% RH ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT 0.03%/ (0~50 ) VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes SAFETY STANDARDS UL60950-1, TUV EN60950-1 approved WITHSTAND VOLTAGE I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH EMC (Note 4) EMC EMISSION Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level, criteria A EMC IMMUNITY MTBF 75.9K hrs min. MIL-HDBK-217F (25 ) OTHERS DIMENSION 280*127*63.5mm (L*W*H) 2.4Kg; 6pcs/14.8Kg/0.89CUFT PACKING 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. NOTE 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on http://www.meanwell.com) 5. Peak current can not exceed 60 sec. 6. Isolated CH3 & CH4 maybe series connected or can be used as positive or negative outputs. 7. Derating may be needed under low input voltages. Please check the derating curve for more details. File Name:QP-375-SPEC 2011-08-19 375W Quad Output with PFC Function Q P-375 s e ri e s Mechanical Specification Case No. 927A Unit:mm 92 42.4 165.1 280 31.7 165.1 250 63.5 5 240 LED Air flow O/P 8-M4 L=6 direction 1 TB2 2 CN62 3 1 6 6-M3 L=6 4 TB1 5 6 +V2 ADJ. I/P 7 1 8 +V3 ADJ. 2 9 +V4 ADJ. 3 10 165.1 42.5 2-M4 L=6 CN62 Pin No. Assignment : JST S6B-XH or equivalent AC Input Terminal Pin No. Assignment Mating Housing Terminal DC Output Terminal Pin No. Assignment Pin No. Assignment 1 PF(Power good / Fail signal) Pin No. Assignment Pin No. Assignment Pin No. Assignment 2 GND 1 AC/L 1,2 +V1 8 -V3 RS- 3 JST XHP JST SXH-001T-P0.6 2 AC/N 3,4,5 COM(V1 and V2) 9 +V4 RS+ or equivalent or equivalent 4 3 FG 6 +V2 10 -V4 RC- 5 7 +V3 RC+ 6 Block Diagram fosc : 100KHz POWER SWITCHING FAN PWM CONTROL +V4 RECTIFIERS REGULATOR & -V4 FILTER RECTIFIERS +V3 MA & & -V3 CONTROL FILTER +S ACTIVE RECTIFIERS POWER RECTIFIERS +V1 EMI INRUSH I/P & SWITCH- & CURRENT FILTER COM FILTER P.F.C. ING LIMITING -S RECTIFIERS MA & & +V2 CONTROL FILTER PF PF FG O.L.P. PWM O.V.P. CONTROL O.T.P. DETECTION CIRCUIT +RC -RC Derating Curve Output Derating VS Input Voltage 100 100 90 80 80 60 70 60 40 50 20 40 -10 0 10 20 30 40 50 60 (HORIZONTAL) 85 95 105 115 125 135 180 230 264 AMBIENT TEMPERATURE ( ) INPUT VOLTAGE (VAC) 60Hz File Name:QP-375-SPEC 2011-08-19 LOAD (%) 9.5 8.2 30.4 9.5 8.2 +V1 ADJ. LOAD (%) 127 37 99.1 13.9 99.1 10.1 113 7 375W Quad Output with PFC Function Q P-375-24 s e ri e s Features : Universal AC input / Full range Built-in active PFC function, PF>0.95 Protections: Short circuit / Overload / Over voltage / Over temperature Forced air cooling by built-in DC fan CH3,4 are isolated from other outputs and the polarity can be reversed No minimum load requirement for CH2,3,4 All output can be adjustable from -5~+10% With power good and fail signal output Built-in remote ON-OFF control Fixed switching frequency at 100KHz 3 years warranty .. SPECIFICATION MODEL QP-375-24B QP-375-24C OUTPUT NUMBER CH1 CH2 CH3 CH4 CH1 CH2 CH3 CH4 DC VOLTAGE +24V +5V 12V 12V +24V +5V 15V 15V RATED CURRENT 10A 10A 4A 4A 10A 10A 4A 4A CURRENT RANGE 1 ~ 10A 0 ~ 16A 0 ~ 4A 0 ~ 4A 1 ~ 10A 0 ~ 10A 0 ~ 4A 0 ~ 4A RATED POWER(max.) 386W 410W RIPPLE & NOISE (max.) Note.2 240mVp-p 50mVp-p 120mVp-p 120mVp-p 240mVp-p 50mVp-p 150mVp-p 150mVp-p OUTPUT VOLTAGE ADJ. RANGE 21.6 ~ 26.4V 4.5 ~ 5.5V 10.8 ~ 13.2V 10.8 ~ 13.2V 21.6 ~ 26.4V 4.5 ~ 5.5V 13.5 ~ 16.5V 13.5 ~ 16.5V VOLTAGE TOLERANCE Note.3 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% LINE REGULATION 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% LOAD REGULATION 0.8% 0.8% 0.8% 0.8% 0.8% 0.8% 0.8% 0.8% SETUP, RISE TIME 800ms, 50ms at full load HOLD UP TIME (Typ.) 36ms at full load VOLTAGE RANGE Note.7 85 ~ 264VAC 120 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF>0.95/230VAC PF>0.98/115VAC at full load EFFICIENCY (Typ.) 78% 80% INPUT 6A/115VAC 3A/230VAC AC CURRENT (Typ.) INRUSH CURRENT (Typ.) COLD START 45A LEAKAGE CURRENT <2mA / 240VAC 105 ~ 135% rated output power OVERLOAD Protection type : Hiccup mode, recovers automatically after condition is removed CH1:27.6 ~ 32.4V PROTECTION OVER VOLTAGE Protection type : Shut down o/p voltage, re-power on to recover 80 5 (TSW1) Detect on heatsink of Q1,Q2 power transistor) OVER TEMPERATURE Protection type : Shut down o/p voltage, recovers automatically after temperature goes down 10ms/1ms POWER GOOD / POWER FAIL(OPTIONAL) FUNCTION RC+/RC-:0 ~ 0.8V POWER ON; 4V ~ 10V POWER OFF REMOTE CONTROL -10 ~ +60 (Refer to "Derating Curve") WORKING TEMP. 20 ~ 90% RH non-condensing WORKING HUMIDITY -20 ~ +85 , 10 ~ 95% RH ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT 0.03%/ (0~50 ) VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes SAFETY STANDARDS UL60950-1, TUV EN60950-1 approved I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC WITHSTAND VOLTAGE SAFETY & ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH EMC (Note 4) EMC EMISSION Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3 EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level, criteria A MTBF 75.9K hrs min. MIL-HDBK-217F (25 ) OTHERS DIMENSION 280*127*63.5mm (L*W*H) 2.4Kg; 6pcs/14.8Kg/0.89CUFT PACKING 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. NOTE 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on http://www.meanwell.com) 5. Peak current can not exceed 60 sec. 6. Isolated CH3 & CH4 maybe series connected or can be used as positive or negative outputs. 7. Derating may be needed under low input voltages. Please check the derating curve for more details. File Name:QP-375-24-SPEC 2011-08-19 375W Quad Output with PFC Function Q P-375-24 s e ri e s Mechanical Specification Case No. 927A Unit:mm 92 42.4 165.1 280 31.7 165.1 63.5 250 5 240 LED Air flow O/P 8-M4 L=6 direction 1 TB2 2 CN62 1 6 3 6-M3 L=6 4 TB1 5 6 +V2 ADJ. I/P 7 1 8 +V3 ADJ. 2 9 +V4 ADJ. 3 10 165.1 42.5 2-M4 L=6 CN62 Pin No. Assignment : JST S6B-XH or equivalent AC Input Terminal Pin No. Assignment Mating Housing Terminal DC Output Terminal Pin No. Assignment Pin No. Assignment 1 PF(Power good / Fail signal) Pin No. Assignment Pin No. Assignment Pin No. Assignment 2 GND 1 AC/L 1,2 +V1 8 -V3 RS- 3 JST XHP JST SXH-001T-P0.6 2 AC/N 3,4,5 COM(V1 and V2) 9 +V4 RS+ or equivalent or equivalent 4 3 FG 6 +V2 10 -V4 RC- 5 7 +V3 RC+ 6 Block Diagram fosc : 100KHz POWER SWITCHING FAN PWM CONTROL +V4 RECTIFIERS REGULATOR & -V4 FILTER RECTIFIERS +V3 MA & & -V3 CONTROL FILTER +S ACTIVE RECTIFIERS POWER RECTIFIERS +V1 EMI INRUSH I/P & SWITCH- & CURRENT FILTER COM FILTER P.F.C. ING LIMITING -S RECTIFIERS MA & & +V2 CONTROL FILTER PF PF FG O.L.P. PWM O.V.P. CONTROL O.T.P. DETECTION CIRCUIT +RC -RC Derating Curve Output Derating VS Input Voltage 100 100 90 80 80 60 70 60 40 50 20 40 -10 0 10 20 30 40 50 60 (HORIZONTAL) 85 95 105 115 125 135 180 230 264 -10 0 AMBIENT TEMPERATURE ( ) INPUT VOLTAGE (VAC) 60Hz File Name:QP-375-24-SPEC 2011-08-19 LOAD (%) 9.5 8.2 30.4 9.5 8.2 +V1 ADJ. LOAD (%) 127 37 99.1 13.9 99.1 10.1 113 7 375W Quad Output with PFC Function Q P-375P s e ri e s Mechanical Specification Unit:mm 250 158 5 240 LED 1 1 6 2 CN62 3 +V1 ADJ. 4 5 TB2 TB1 6 +V2 ADJ. 7 1 8 +V3 ADJ. 2 9 +V4 ADJ. FS1 3 T6.3A/250V 10 6- 3.2 CN62 Pin No. Assignment : JST S6B-XH or equivalent Pin No. Assignment Mating Housing Terminal AC Input Terminal DC Output Terminal Pin No. Assignment Pin No. Assignment 1 PF(Power good / Fail signal) Pin No. Assignment Pin No. Assignment Pin No. Assignment 2 GND 1 AC/L 1,2 +V1 8 -V3 RS- 3 JST XHP JST SXH-001T-P0.6 2 AC/N 3,4,5 COM(V1 and V2) 9 +V4 RS+ or equivalent or equivalent 4 3 FG 6 +V2 10 -V4 RC- 5 7 +V3 RC+ 6 Derating Curve Output Derating VS Input Voltage 100 100 80CFM 90 80 80 60 70 60 40 50 20 40 -10 0 10 20 30 40 50 60 (HORIZONTAL) 85 95 105 115 125 135 180 230 264 AMBIENT TEMPERATURE ( ) INPUT VOLTAGE (VAC) 60Hz File Name:QP-375P-SPEC 2011-08-19 LOAD (%) 123 35 52 113 5 LOAD (%) 375W Quad Output with PFC Function Q P-375 s e ri e s Control terminal instruction manual +V1 +V1 +V1 +V1 +V1 +V1 + + + Load Load Load COM COM COM PF - - - DC 0~15V +5V GND COM COM COM COM COM COM +V2 +V2 +V2 +V3 +V3 +V3 -V3 -V3 -V3 +V4 +V4 +V4 -V4 -V4 -V4 Remote Sensing Power Fail Signal Power Fail Signal PF Signal is the voltage difference between Power ON: When VRC+,RC-=0 ~ 0.8V or Open "GND" and "PF" pin output Power OFF: When VRC+,RC-=4 ~ 10V +V1 +V1 +V1 +V1 COM COM COM COM COM COM COM COM +V2 +V2 +V3 +V3 -V3 -V3 -V3 +V4 +V4 -V4 -V4 -V3+(-V4) -V4 V3,V4 All Negative(-) V3 Puls Negative(-) +V1 +V1 +V1 +V1 COM COM COM COM COM COM COM COM +V2 +V2 +V3 +V3 +V3+V4 +V3 -V3 -V3 +V4 +V4 +V4 -V4 -V4 V3,V4 All Positive(+) V3 Plus V4 Positive(+) File Name:QP-375-SPEC 2011-08-19 PF GND RS- RS+ RC- RC+ PF GND RS- RS+ RC- RC+ PF GND RS- RS+ RC- RC+
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the QP-375-5B have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
Mean Well ES18U09-P1J Power Supply 18W; 9.0V@2.00A; 2.1*5.5*11/C+/6F1185 (79x54x33 mm) Wallmount Enc...
Mean Well ES25B48-P1J Power Supply - 25W; 48V@0.52A; 2.1*5.5*11/C+/6F1185 (79 x 54 x 33mm) Desktop E...
Manufacturers






What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods