MEAN WELL QP-320F

320W Quad Output with PFC Function Q P- 32 0 s e ri e s Features : Universal AC input / Full range Built-in active PFC function, PF>0.95 Protections: Short circuit / Overload / Over voltage / Over temperature CH1 & CH2 can be adjusted from -5% ~ +10% With power good and fail signal output Built-in remote sense function for CH1 & CH2 LED indicator for power on 100% full load burn-in test 20A peak load capability for 24V channel 3 years warranty .. SPECIFICATION MODEL QP-320D QP-320F OUTPUT NUMBER CH1 CH2 CH3 CH4 CH1 CH2 CH3 CH4 DC VOLTAGE 5V 12V 24V -12V 5V 15V 24V -15V RATED CURRENT 20A 10A 3A 2A 20A 8A 3A 1.6A CURRENT RANGE 2.5 ~ 20A 0 ~ 10A 0.2 ~ 5A 0.2 ~ 2A 2.5 ~ 20A 0 ~ 10A 0.2 ~ 5A 0.2 ~ 1.6A PEAK CURRENT 20A 10A 20A, 1ms(Note5) 2A 20A 10A 20A, 1ms(Note5) 1.6A RATED POWER 316W OUTPUT RIPPLE & NOISE (max.) Note.2 100mVp-p 150mVp-p 150mVp-p 150mVp-p 100mVp-p 150mVp-p 150mVp-p 150mVp-p VOLTAGE ADJ. RANGE CH1,2:+10,-5% VOLTAGE TOLERANCE Note.3 3.0% 3.0% +10,-6% 10% 3.0% 3.0% +10,-6% 10% LINE REGULATION 1.0% 2.0% 2.0% 3.0% 1.0% 2.0% 2.0% 3.0% LOAD REGULATION 2.0% 3.0% 6.0% 8.0% 2.0% 3.0% 6.0% 8.0% SETUP, RISE TIME 800ms, 50ms at full load HOLD UP TIME (Typ.) 16ms at full load VOLTAGE RANGE 90 ~ 264VAC 127 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF>0.95/230VAC PF>0.98/115VAC at full load INPUT EFFICIENCY (Typ.) 83% AC CURRENT (Typ.) 4A/115VAC 2A/230VAC INRUSH CURRENT (Typ.) 25A/115VAC 45A/230VAC LEAKAGE CURRENT <2mA / 240VAC 105 ~ 150% rated output power OVERLOAD Protection type : Fold back current limiting, recovers automatically after fault condition is removed CH1:5.75 ~ 6.75V CH2:13.8 ~ 16.2V CH1:5.75 ~ 6.75V CH2:17.25 ~ 20.25V PROTECTION OVER VOLTAGE Protection type : Shut down o/p voltage, re-power on to recover 95 5 (TSW1 )detect on heatsink of power transistor OVER TEMPERATURE Protection type : Shut down o/p voltage, recovers automatically after temperature goes down FUNCTION 10ms/1ms POWER GOOD / POWER FAIL WORKING TEMP. -10 ~ +70 (Refer to "Derating Curve") 20 ~ 90% RH non-condensing WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY -20 ~ +85 , 10 ~ 95% RH TEMP. COEFFICIENT 0.03%/ (0 ~ 50 VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes SAFETY STANDARDS UL60950-1, TUV EN60950-1 approved WITHSTAND VOLTAGE I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH EMC (Note 4) EMC EMISSION Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3 EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level, criteria A MTBF 213.5K hrs min. MIL-HDBK-217F (25 ) OTHERS DIMENSION 215*115*50mm (L*W*H) 1.2Kg; 12pcs/15.4Kg/0.92CUFT PACKING 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. NOTE 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on http://www.meanwell.com) 5. Every output channel can provide up to the maximum current, but total load can't exceed the rated output power. 6. CH3(24V) peak current 20A, 1ms, repeatable in every 100ms. CH3(24V) output must be above 16V in the period of peak current. File Name:QP-320-SPEC 2011-08-19 320W Quad Output with PFC Function Q P-320 s e ri e s Mechanical Specification Case No. 912I Unit:mm 117.5 32.5 150 177.5 27.5 19 LED 6 V2 CN2 V1 1 ADJ. 9 8 7 6 5 36.5 4-M4 L=5mm 4 3 6-M3 L=3mm 2 1 Terminal Pin No. Assignment 15 Pin No. Assignment Pin No. Assignment 215 1 AC/L 5 DC OUTPUT V3 13 max. 32.5 150 2 AC/N 6 DC OUTPUT V1 3 FG 7,8 DC OUTPUT COM Air flow 4 DC OUTPUT V4 9 DC OUTPUT V2 direction DC Output Connector (CN2) : JST S6B-XH-A-1 or equivalent Pin No. Assignment Pin No. Assignment Mating Housing Terminal 1 V1(+S) 4 V2(-S) 6-M4 L=5mm JST XHP JST SXH-001T-P0.6 2 V1(-S) 5 PF/PG or equivalent or equivalent 3 V2(+S) 6 GND fosc : 100KHz RECTIFIERS & V4 Block Diagram FILTER RECTIFIERS RECTIFIERS EMI POWER I/P & & V3 SWITCHING FILTER PFC FILTER RECTIFIERS & V2 MA & CONTROL FILTER PWM PF/PG PF/PG CONTROL RECTIFIERS V1 & COM FILTER O.L.P. O.V.P. O.T.P. DETECTED CIRCUIT Derating Curve Output Derating VS Input Voltage 100 100 90 80 80 70 60 60 40 50 20 40 -10 0 10 20 30 40 50 60 70 (HORIZONTAL) 90 105 115 135 155 230 264 -10 0 AMBIENT TEMPERATURE ( ) INPUT VOLTAGE (VAC) 60Hz File Name:QP-320-SPEC 2011-08-19 135 8 9.5 LOAD (%) 36.7 C L 16 25 10 95 32.5 50 50 37.5 50.5 LOAD(%) 115