PCD-25-1050 - MEAN WELL

Description

Mean Well PCD-25-1050 Power Supplies-1050mA, 25.2W Single Output AC Dimmable LED Power Supply

Part Number

PCD-25-1050

Price

Request Quote

Manufacturer

MEAN WELL

Lead Time

Request Quote

Category

PRODUCTS - P

Specifications

AC CURRENT (Typ.)

0.6A/115VAC 0.3A/230VAC 0.2A/277VAC

CURRENT ACCURACY

5.0%

CURRENT RANGE

0 ~ 1050mA

DIMENSION

84*57*29.5mm (L*W*H)

EFFICIENCY (Typ.)

80.5%

FREQUENCY RANGE

47 ~ 63Hz

INRUSH CURRENT(max.)

40A/230VAC

NO LOAD OUTPUT VOLTAGE

35V

OPERATING VOLTAGE RANGE

16 ~ 24V

OVER TEMPERATURE

95 degrees Celsius 10 degrees Celsius (RTH1)
Protection type : Shut down o/p voltage, re-power on to recover

POWER FACTOR (Typ.)

PF>0.9/115VAC, PF>0.9/230VAC, PF>0.9/277VAC at full load

RATED CURRENT

1050mA

RATED POWER

25.2W

RIPPLE & NOISE (max.)

2.2Vp-p

SETUP TIME

1000ms / 230VAC 2000ms / 115VAC at full load

Features

100% full load burn-in test
115VAC or 230VAC models available
AC phase-cut dimming
Built-in active PFC function
Class 2 power unit
Class II power unit, no FG
Constant current design
Cooling by free air convection
Fully isolated plastic case
IP30 design
Protections: Short circuit / Over temperature
Suitable for indoor LED lighting applications
Work with leading edge and trailing edge TRIAC dimmers

Datasheet

MeanWell-PCD-25series-ds-997497212.pdf

224 KiB

Download

Extracted Text

25W Single Output AC Dimmable LED Power Supply PCD-25 series Features : AC phase-cut dimming Work with leading edge and trailing edge TRIAC dimmers 115VAC or 230VAC models available Built-in active PFC function Constant current design Protections: Short circuit / Over temperature Cooling by free air convection Fully isolated plastic case IP30 design Class power unit, no FG Class 2 power unit Suitable for indoor LED lighting applications 100% full load burn-in test Low cost High reliability 3 years warranty 110 F SELV ( for B type only) ( for B type only) I P 3 0 ( for A type only) ( for PCD-25-350/700 ) ( except PCD-25-350/700 ) ( for B type only) PCD-25-350 A A : With AC input 90~ 135VAC. B : With AC input 180~ 295VAC. SPECIFICATION MODEL PCD-25-350 PCD-25-700 PCD-25-1050 PCD-25-1400 RATED CURRENT 350mA 700mA 1050mA 1400mA OPERATING VOLTAGE RANGE 40 ~ 58V 24 ~ 36V 16 ~ 24V 12 ~ 18V CURRENT RANGE 0 ~ 350mA 0 ~ 700mA 0 ~ 1050mA 0 ~ 1400mA CURRENT ACCURACY 5.0% OUTPUT RATED POWER 20.3W 25.2W 25.2W 25.2W RIPPLE & NOISE (max.) Note.1 4.6Vp-p 2.7Vp-p 2.2Vp-p 2Vp-p NO LOAD OUTPUT VOLTAGE (max.) 63V 50V 35V 25V SETUP TIME 1000ms / 230VAC 2000ms / 115VAC at full load FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF>0.9/115VAC, PF>0.9/230VAC, PF>0.9/277VAC at full load (Please refer to "Power Factor Characteristic" curve) EFFICIENCY (Typ.) 82% 81% 80.5% 80% INPUT AC CURRENT (Typ.) 0.6A/115VAC 0.3A/230VAC 0.2A/277VAC INRUSH CURRENT(max.) 40A/230VAC LEAKAGE CURRENT <0.5mA / 240VAC SHORT CIRCUIT Hiccup mode, recovers automatically after fault condition is removed. 95 10 (RTH1) PROTECTION OVER TEMPERATURE Protection type : Shut down o/p voltage, re-power on to recover -30 ~ +60 (Refer to "Derating Curve") WORKING TEMP. 20 ~ 95% RH non-condensing WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +80 , 10 ~ 95% RH TEMP. COEFFICIENT 0.03%/ (0 ~ 50 ) VIBRATION 10 ~ 500Hz, 2G 12min./1cycle, period for 72min. each along X, Y, Z axes UL8750, CSA C22.2 No. 250.0-08(except for PCD-16-350, PCD-25-350, PCD-25-700), ENEC EN613471, EN61347-2-13, SAFETY STANDARDS EN62384(for B type only), IP30 approved ; design refer to UL60950-1, TUV EN60950-1, EN61347-1, EN61347-2-13 SAFETY & WITHSTAND VOLTAGE I/P-O/P:3.75KVAC EMC ISOLATION RESISTANCE I/P-O/P:100M Ohms / 500VDC / 25 / 70% RH EMC EMISSION Compliance to EN55015 (B type only), EN61000-3-2 Class C ; EN61000-3-3, FCC part 18 non-consumer equipment (A type only) EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024,EN61547, light industry level, criteria A MTBF 906.5Khrs min. MIL-HDBK-217F (25 ) 84*57*29.5mm (L*W*H) OTHERS DIMENSION 0.19Kg; 72pcs/14.7Kg/0.92CUFT PACKING 1. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. NOTE 2. Direct connecting to LEDs is suggested, but is not suitable for using additional drivers. File Name:PCD-25-SPEC 2012-04-17 25W Single Output AC Dimmable LED Power Supply PCD-25 series Mechanical Specification Case No.PCD16A Unit:mm A Type:(PCD-25-_A) 3 84 150 10 UL1430 18AWG V+(RED) 34.5 V-(BLACK) T case 7.3 7.3 75 5 UL1430 18AWG AC/N(WHITE) AC/L(BLACK) 3 T case: Max. Case Temperature. B Type:(PCD-25-_B) 3 84 150 10 UL1430 18AWG V+(RED) 34.5 V-(BLACK) T case 7.3 7.3 75 5 AC/N(BLUE) NISPT-1 18AWG AC/L(BROWN) 3 T case: Max. Case Temperature. Block Diagram fosc : 90KHz(115VAC) 120KHz(230VAC) RECTIFIERS EMI FILTER POWER +V I/P & & SWITCHING -V RECTIFIERS FILTER DETECTION CIRCUIT O.L.P. PWM & PFC CONTROL O.C.P. File Name:PCD-25-SPEC 2012-04-17 2- 8.9 2- 8.9 2- 3.6 2- 3.6 15.3 15.3 57 57 14.5 14.5 . 15.3 15 3 1.9 1.9 29.5 29.5 25W Single Output AC Dimmable LED Power Supply PCD-25 series Derating Curve Static Characteristics 100 100 90 80 80 70 60 60 40 50 20 40 -30 -25 -5 0 15 30 40 50 60 (HORIZONTAL) 90 135 Type A (60Hz) 180 295 Type B (50Hz) AMBIENT TEMPERATURE ( ) INPUT VOLTAGE (V) Power Factor Characteristic Constant Current Mode 1 .0 0 0 .9 8 0 .9 6 0 .9 4 0 .9 2 2 7 7 V a c ( B T y p e ) 0 .9 0 0 .8 8 2 3 0 V a c ( B T y p e ) 0 .8 6 1 1 5 V a c ( A T y p e ) 0 .8 4 0 .8 2 0 .8 0 0 .7 8 5 0 % 6 0 % 7 0 % 8 0 % 9 0 % 1 0 0 % (25W) LOAD EFFICIENCY vs LOAD (PCD-25-350) PCD-25 series possess superior working efficiency that up to 86% can be reached in field applications. 8 8 8 4 8 0 7 6 7 2 6 8 2 7 7 V ac(B Ty pe) 6 4 6 0 2 3 0 V ac(B Ty pe) 5 6 1 1 5 V ac(A Ty pe) 5 2 4 8 4 4 4 0 3 6 1 0 % 2 0 % 3 0 % 4 0 % 5 0 % 6 0 % 7 0 % 8 0 % 9 0 % 1 0 0 % LOAD File Name:PCD-25-SPEC 2012-04-17 PF EFFICIENCY (%) LOAD (%) LOAD (%) 25W Single Output AC Dimmable LED Power Supply PCD-25 series AC Dimming Operation The following diagram depicts a typical installation utilizing the PCD-25 : Io 0A TRIAC Based Dimmer MW PCD-25 Under direct driving, the power supply will work in "constant current mode (CC)" and output voltage of the power supply will be clamped by sum of forward voltage (VF) of the LED strip. Dimmer Compatibility Chart Manufacturer Dimmer Model LUTRON SKYLARK SF-12P-277 (277VAC / 60Hz) LUTRON DVF-103P-277 (277VAC / 60Hz) LUTRON SKYLARK SF-10P (120VAC / 60Hz) LUTRON SKYLARK S-600P (120VAC / 60Hz) LUTRON SKYLARK DVF-103P (120VAC / 60Hz) LEVITON ILLUMATECH TM Cat.No.IP106 (120VAC / 60Hz) LEVITON SURESLIDE TM Cat.No.6633-P (120VAC / 60Hz) LEVITON SURESLIDE TM Cat. NO.6615-P (120VAC / 60Hz) JUNG Licht-Management 225 TDE (230VAC / 50Hz) JUNG Licht-Management 225 NV DE (230VAC / 50Hz) BERKER Tronic-Drehdimmer 286710 (230-240VAC / 50Hz) Bodo Ehmann LICHTREGLER T39.01 (230VAC / 50Hz) CLIPSAL 32E450UDM (220-240VAC / 50Hz) CLIPSAL NO 32E450TM (220-240VAC / 50Hz) Conduction angle: 30 degrees(min.) / 180 degrees(max.) File Name:PCD-25-SPEC 2012-04-17

Frequently asked questions

At GID Industrial (Elite.Parts' parent company), we specialize in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

Warranties differ by part and by which suppliers we use to procure it for you. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Elite.Parts can ship via FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Absolutely! We are happy to serve customers regardless of location. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

All major credit cards are accepted: Visa, MasterCard, Discover, and American Express. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products