Manufacturers
MEAN WELL PS-65-27
Description
MeanWell PS-65-27 Power Supply - Output Voltage; +27V2.4A (127x76.2x42 mm) Single Output Open Frame Power Supply
Part Number
PS-65-27
Price
Request Quote
Manufacturer
MEAN WELL
Lead Time
Request Quote
Category
PRODUCTS - P
Specifications
AC CURRENT (Typ.)
1.2A/115VAC; 0.72A/230VAC
CURRENT RANGE
0 ~ 2.7A
DC VOLTAGE
27V
DIMENSION
127*76*42mm (L*W*H)
EFFICIENCY(Typ.)
80%
EMC EMISSION
Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3
EMC IMMUNITY
Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level, criteria A
FREQUENCY RANGE
47 ~ 440Hz
HOLD UP TIME (Typ.)
60ms at full load
Humidity
Operating:20 ~ 90% RH non-condensing; Storage:10 ~ 95% RH
INRUSH CURRENT (Typ.)
COLD START 20A/115VAC; 40A/230VAC
ISOLATION RESISTANCE
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25°C / 70% RH
LINE REGULATION
±1.0%
LOAD REGULATION
±2.0%
MTBF
300.7K hrs min.; MIL-HDBK-217F (25°C)
OUTPUT POWER (max.)
Rated output power for convection; 72W (+3.3V : 50W;+5V:69W) with 18 CFM min. Forced air
Over Voltage Protection
31 ~ 36.45V; Protection type : Hiccup mode, recovers automatically after fault condition is removed
Overload Protection
73 ~ 105W(3.3V : 51 ~ 75W)(5V : 70 ~ 105W) rated output power; Protection type:Hiccup mode, recovers automatically after fault condition is removed.
RATED CURRENT
2.4A
RATED POWER
64.8W
RIPPLE & NOISE (max.)
100mVp-p
SAFETY STANDARDS
UL60950-1, TUV EN60950-1 approved
SETUP, RISE TIME
800ms, 20ms at full load
Temperature
Operating:-10 ~ +60°C(Refer to "Derating Curve"); Storage:-20 ~ +85°C
Temperature Coefficent
±0.04%/°C(0 ~ 50°C)
Vibration
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
VOLTAGE ADJ. RANGE
25.65 ~ 29.7V
VOLTAGE RANGE
90 ~ 264VAC; 127 ~370VDC
VOLTAGE TOLERANCE
±2.0%
WITHSTAND VOLTAGE
I/P-O/P:3KVAC; I/P-FG:1.5KVAC; O/P-FG:0.5KVAC
Datasheet
Extracted Text
65W Single Output Switching Power Supply PS-65 series Features : Universal AC input/Full range Low leakage current<0.5mA Protections: Short circuit / Overload / Over voltage Cooling by free air convection 100% full load burn-in test Fixed switching frequency at 65KHz 2 years warranty SPECIFICATION MODEL PS-65-3.3 PS-65-5 PS-65-7.5 PS-65-12 PS-65-13.5 PS-65-15 PS-65-24 PS-65-27 PS-65-48 DC VOLTAGE 3.3V 5V 7.5V 12V 13.5V 15V 24V 27V 48V RATED CURRENT 12A 12A 8A 5.2A 4.7A 4.2A 2.7A 2.4A 1.35A CURRENT RANGE 0 ~ 15.2A 0 ~ 13.8A 0 ~ 9.6A 0 ~ 6A 0 ~ 5.4A 0 ~ 4.8A 0 ~ 3A 0 ~ 2.7A 0 ~ 1.5A RATED POWER 39.6W 60W 60W 62.4W 63.45W 63W 64.8W 64.8W 64.8W OUTPUT POWER (max.) Rated output power for convection; 72W (+3.3V : 50W;+5V:69W) with 18 CFM min. Forced air RIPPLE & NOISE (max.) Note.2 80mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p OUTPUT VOLTAGE ADJ. RANGE 3.14 ~ 3.63V 4.75 ~ 5.5V 7.13 ~ 8.25V 11.4 ~ 13.2V 12.8 ~ 14.9V 14.25 ~ 16.5V 22.8 ~ 26.4V 25.65 ~ 29.7V 45.6 ~ 52.8V VOLTAGE TOLERANCE Note.3 3.0% 3.0% 3.0% 2.0% 2.0% 2.0% 2.0% 2.0% 2.0% LINE REGULATION 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% LOAD REGULATION 3.0% 3.0% 3.0% 2.0% 2.0% 2.0% 2.0% 2.0% 2.0% SETUP, RISE TIME 800ms, 20ms at full load HOLD UP TIME (Typ.) 60ms at full load VOLTAGE RANGE 90 ~ 264VAC 127 ~370VDC FREQUENCY RANGE 47 ~ 440Hz EFFICIENCY(Typ.) 69% 76% 79% 79% 79% 79% 80% 80% 80% INPUT AC CURRENT (Typ.) 1.2A/115VAC 0.72A/230VAC INRUSH CURRENT (Typ.) COLD START 20A/115VAC 40A/230VAC LEAKAGE CURRENT <0.75mA / 240VAC 73 ~ 105W(3.3V : 51 ~ 75W)(5V : 70 ~ 105W) rated output power OVERLOAD Protection type : Hiccup mode, recovers automatically after fault condition is removed. PROTECTION 3.8 ~ 4.46V 5.75 ~ 6.75V 8.63 ~ 10.1V 13.8 ~ 16.2V 15.5 ~ 18.2V 17.25 ~ 20.25V 27.6 ~ 32.4V 31 ~ 36.45V 55.2 ~ 64.8V OVER VOLTAGE Protection type : Hiccup mode, recovers automatically after fault condition is removed. -10 ~ +60 (Refer to "Derating Curve") WORKING TEMP. 20 ~ 90% RH non-condensing WORKING HUMIDITY ENVIRONMENT -20 ~ +85 , 10 ~ 95% RH STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT 0.04%/ (0 ~ 50 VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes SAFETY STANDARDS UL60950-1, TUV EN60950-1 approved WITHSTAND VOLTAGE I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH EMC (Note 4) EMC EMISSION Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3 EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level, criteria A MTBF 300.7K hrs min. MIL-HDBK-217F (25 ) OTHERS DIMENSION 127*76*42mm (L*W*H) 0.21Kg; 54pcs/14.2Kg/1.35CUFT PACKING 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. NOTE 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on http://www.meanwell.com) 5. Mounting holes M1 and M2 should be grounded for EMI purposes. 6. Heat Sink HS1,HS2 can not be shorted. File Name:PS-65-SPEC 2011-08-18 4- 3.8 65W Single Output Switching Power Supply PS-65 series Mechanical Specification Unit:mm 127 5.6 115.8 FG HS1 M1 M2 CN1 1 CN2 1 2 2 3 FS1 4 AC FUSE 5 HS2 F4A/250V 6 AC Input Connector (CN1) : Molex 5277-02 or equivalent DC Output Connector (CN2) : Molex 5273-06 or equivalent Pin No. Assignment Mating Housing Terminal Pin No. Assignment Mating Housing Terminal 1 AC/N 1,2,3 +V Molex 5195 Molex 5194 Molex 5195 Molex 5194 or equivalent or equivalent or equivalent 2 AC/L or equivalent 4,5,6 -V HS1,HS2 can not be shorted Block Diagram fosc : 65KHz RECTIFIERS RECTIFIERS POWER +V EMI I/P & & SWITCHING FILTER -V FILTER FILTER FG DETECTION CIRCUIT PWM O.L.P. CONTROL O.V.P. Derating Curve Output Derating VS Input Voltage 100 100 OTHERS 90 85 80 80 70 60 3.3V,5V 60 40 50 20 40 -10 0 10 20 30 40 50 60 (HORIZONTAL) 90 95 100 115 120 140 160 180 200 220 240 264 AMBIENT TEMPERATURE ( ) INPUT VOLTAGE (VAC) 60Hz File Name:PS-65-SPEC 2011-08-18 LOAD (%) 76 5.6 64.8 42 LOAD (%)
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the PS-65-27 have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
Mean Well PCD-16-1050 Power Supplies-1050mA, 16.8W Single Output AC Dimmable LED Power Supply
Mean Well PCD-16-1400 Power Supplies-1400mA, 16.8W Single Output AC Dimmable LED Power Supply
Mean Well PCD-16-350 Power Supplies-350mA, 16.8W Single Output AC Dimmable LED Power Supply
Mean Well PCD-16-700 Power Supplies-700mA, 16.8W Single Output AC Dimmable LED Power Supply
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods