P40A-6P2J - MEAN WELL

Description

Mean Well P40A-6P2J 40W 24VDC (Desk Top) Single Output Power Supply

Part Number

P40A-6P2J

Price

Request Quote

Manufacturer

MEAN WELL

Lead Time

Request Quote

Category

POWER SUPPLY

Specifications

AC CURRENT

1A / 100VAC

CURRENT RANGE

0 ~ 1.66A

DC VOLTAGE

24V

Dimensions

108 x 67 x 36mm (LxWxH)

EFFICIENCY(Typ.)

80%

EMI CONDUCTION & RADIATION

Compliance to EN55022(CISPR22) class B

EMS Immunity

Compliance to EN61000-4-2,3,4,5,6,11,ENV50204, l criteria A

FREQUENCY RANGE

47 ~ 63Hz

HARMONIC CURRENT

Compliance to EN61000-3-2,-3

Humidity

Operating:20% ~ 90% RH non-condensing; Storage:10 ~ 95% RH

INRUSH CURRENT (MAX.)

60A / 230VAC

ISOLATION RESISTANCE

I/P-O/P, I/P-FG:100M Ohms / 500VDC / 25°C / 70% RH

LEAKAGE CURRENT (MAX.)

0.75mA / 240VAC

LINE REGULATION

±1.0%

LOAD REGULATION

±2.0%

MTBF

500khrs min. MIL-HDBK-217F (25°C)

OVER TEMPERATURE Protection

IC1Tj135°C; Protection type:Shut down o/p voltage, recovers automatically after temperature goes down

Over Voltage Protection

110 ~ 140% rated output voltage; Protection type:Shut down o/p voltage, re-power on to recover

Overload Protection

150 ~ 450% rated output power; Protection type:Hiccup mode, recovers automatically after fault condition is removed

RATED CURRENT

1.66A

RATED POWER

40W

RIPPLE & NOISE (max.)

150mVp-p

SAFETY STANDARDS

UL1950, CSA22.2 approved

SETUP, RISE, HOLD UP TIME

200ms, 50ms, 16ms at full load

Temperature

Operating:0 ~ +40°C (Refer to output load derating curve); Storage:-20 ~ +85°C

Temperature Coefficient

±0.03% / ( 0 ~ 50°C)

Vibration

10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes

VOLTAGE ADJ. RANGE

21 ~ 27V; Fixed output by internal VR

VOLTAGE RANGE

90 ~ 264VAC, 135 ~ 370VDC

VOLTAGE TOLERANCE

±3.0%

WITHSTAND VOLTAGE

I/P-O/P:3KVAC I/P-FG:1.5KVAC

Features

3 pole AC inlet IEC320-C14
Approvals: UL / CUL / CB
Class power ( with earth pin)
Fix switching frequency and regulation
Full output 3~48V safety approval
Fully enclosed plastic case
LED indicator for power on
Protections: Short circuit / Overload / Over voltage / Over temp.
Topology: Top switch circuit

Datasheet

Mean Well-P40A Series-datasheet1-577009920.pdf

148 KiB

Download

Extracted Text

15~40W AC-DC Single Output Desktop P40A seri es Features : 3 pole AC inlet IEC320-C14 Class power ( with earth pin) Full output 3~48V safety approval Protections: Short circuit / Overload / Over voltage / Over temp. Fully enclosed plastic case Fix switching frequency and regulation Topology: Top switch circuit LED indicator for power on Approvals: UL / CUL / CB 2 years warranty SPECIFICATION ORDER NO. P40A-0P2J P40A-1P2J P40A-1-1P2J P40A-2P2J P40A-3P2J P40A-4P2J P40A-5P2J P40A-6P2J P40A-7P2J P40A-8P2J SAFETY MODEL NO. PSU40A-0 PSU40A-1 PSU40A-1-1 PSU40A-2 PSU40A-3 PSU40A-4 PSU40A-5 PSU40A-6 PSU40A-7 PSU40A-8 DC VOLTAGE Note.2 3.3V 5V 7.5V 9V 12V 15V 18V 24V 28V 48V RATED CURRENT 4.54A 5A 4A 3.88A 3.33A 2.66A 2.22A 1.66A 1.42A 0.83A CURRENT RANGE 0 ~ 4.54A 0 ~ 5A 0 ~ 4A 0 ~3.88A 0 ~ 3.33A 0 ~ 2.66A 0 ~ 2.22A 0 ~ 1.66A 0 ~ 1.42A 0 ~ 0.83A RATED POWER 15W 25W 30W 35W 40W 40W 40W 40W 40W 40W RIPPLE & NOISE (max.) Note.3 50mVp-p 50mVp-p 80mVp-p 80mVp-p 80mVp-p 100mVp-p 100mVp-p 150mVp-p 150mVp-p 150mVp-p OUTPUT 3~5V 5~6V 6~8V 8~11V 11~13V 13~16V 16~21V 21~27V 27~33V 33~48V VOLTAGE ADJ. RANGE Fixed output by internal VR VOLTAGE TOLERANCE Note.4 10% 6.0% 5.0% 5.0% 4.0% 3.0% 3.0% 3.0% 3.0% 2.0% LINE REGULATION Note.5 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% LOAD REGULATION Note.6 8.0% 5.0% 5.0% 4.0% 3.0% 2.0% 2.0% 2.0% 2.0% 1.0% SETUP, RISE, HOLD UP TIME 200ms, 50ms, 16ms at full load VOLTAGE RANGE 90 ~ 264VAC 135 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz EFFICIENCY (Typ.) 65% 70% 72% 74% 75% 78% 78% 80% 80% 82% INPUT AC CURRENT 1A / 100VAC INRUSH CURRENT (max.) 60A / 230VAC LEAKAGE CURRENT(max.) 0.75mA / 240VAC 150 ~ 450% rated output power OVERLOAD Protection type : Hiccup mode, recovers automatically after fault condition is removed 110 ~ 140% rated output voltage PROTECTION OVER VOLTAGE Protection type : Shut down o/p voltage, re-power on to recover IC1Tj135 OVER TEMPERATURE Protection type : Shut down o/p voltage, recovers automatically after temperature goes down WORKING TEMP. 0 ~ +40 (Refer to output load derating curve) WORKING HUMIDITY 20% ~ 90% RH non-condensing -20 ~ +85 , 10 ~ 95% RH ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT 0.03% / ( 0 ~ 50 ) VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes SAFETY STANDARDS UL1950, CSA22.2 approved WITHSTAND VOLTAGE I/P-O/P:3KVAC I/P-FG:1.5KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P, I/P-FG:100M Ohms / 500VDC / 25 / 70% RH EMC EMI CONDUCTION & RADIATION Compliance to EN55022(CISPR22) class B (Note. 7) HARMONIC CURRENT Compliance to EN61000-3-2,-3 EMS IMMUNITY Compliance to EN61000-4-2,3,4,5,6,11,ENV50204, light industry level, criteria A MTBF 500khrs min. MIL-HDBK-217F (25 ) OTHERS DIMENSION 108*67*36mm (L*W*H) 0.3kg; 54pcs/ 20kg / CARTON PACKING PLUG Standard type P2J: 2.1 * 5.5 * 11mm, center positive for stock ; Other type available by customer requested CONNECTOR CABLE Standard type see page2 ; Other type available by customer requested 1.All parameters are specified at 230VAC input, rated load, 25 70% RH ambient. NOTE 2.DC voltage: The output voltage set at point measure by plug terminal & 50% load. 3.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor. 4.Tolerence: includes set up tolerance, line regulation, load regulation. 5.Line regulation is measured from low line to high line at rated load. 6.Load regulation is measured from 0% to 100% rated load. 7.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. File Name:P40A-SPEC 2011-03-07 15~40W AC-DC Single Output Desktop P40A seri es U US SP P- -2 22 25 5 s se e r rii e e s s Mechanical Specification Unit:mm 16AWG SPT-2 1230 +100/-0 for 3.3V, 5V 16AWG SPT-2 1830 +100/-0 for 7.5V 18AWG SPT-1 1830 +100/-0 for others 36 106 11 POWER LED ID 2.1 x OD 5.5 108 Plug Assignment 69.9 18 Standard plug: P2J (option) 3 P2J P/N OUTPUT R1 CENTER + NAME PLATE RUBBER FOOTX4 Derating Curve Static Characteristics 100 100 80 60 60 0 10 20 30 40 0 50 60 70 80 90 100 260 Ta ( ) INPUT VOLTAGE File Name:P40A-SPEC 2011-03-07 67 LOAD (%) 36 45 SWITCHING ADAPTOR 42 67 LOAD (%) 33.5

Frequently asked questions

At GID Industrial (Elite.Parts' parent company), we specialize in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

Warranties differ by part and by which suppliers we use to procure it for you. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Elite.Parts can ship via FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Absolutely! We are happy to serve customers regardless of location. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

All major credit cards are accepted: Visa, MasterCard, Discover, and American Express. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products