LPS-100-13.5 - MEAN WELL

Description

MeanWell LPS-100-13.5 Power Supply - Output Voltage; +13.5V7.5A (222x62x32 mm) Single Output Open Frame Power Supply

Part Number

LPS-100-13.5

Price

Request Quote

Manufacturer

MEAN WELL

Lead Time

Request Quote

Category

POWER SUPPLY

Specifications

AC CURRENT (Typ.)

2.3A/115VAC; 1.5A/230VAC

CURRENT RANGE

0 ~ 7.5A

DC VOLTAGE

13.5V

Dimensions

222*62*32mm (L*W*H)

EFFICIENCY(Typ.)

79%

EMC EMISSION

Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3

EMC IMMUNITY

Compliance to EN61000-4-2,3,4,5,6,11, light industry level, criteria A

FREQUENCY RANGE

47 ~ 63Hz

HOLD UP TIME (Typ.)

20ms/230VAC; 20ms/115VAC at full load

Humidity

Operating:20 ~ 90% RH non-condensing; Storage:10 ~ 95% RH

INRUSH CURRENT (Typ.)

COLD START 30A/115VAC; 60A/230VAC

ISOLATION RESISTANCE

I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25°C / 70% RH

LINE REGULATION

±0.5%

LOAD REGULATION

±1.5%

MTBF

203.6Khrs min.; MIL-HDBK-217F (25°C)

Over Voltage Protection

15.5 ~ 18.2V; Protection type:Hiccup mode, recovers automatically after fault condition is removed

Overload Protection

105 ~ 140% (+24V: above 6.5A) rated output power; Protection type:Hiccup mode, recovers automatically after fault condition is removed

RATED CURRENT

7.5A

RATED POWER

101.25W

RIPPLE & NOISE (max.)

100mVp-p

SAFETY STANDARDS

UL60950-1, TUV EN60950-1 approved

SETUP, RISE TIME

800ms, 50ms/230VAC; 1200ms, 50ms/115VAC at full load

Temperature

Operating:-10 ~ +60°C(Refer to "Derating Curve"); Storage:-20 ~ +85°C

Temperature Coefficient

±0.05%/°C(0 ~ 50°C)

Vibration

10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes

VOLTAGE ADJ. RANGE

12 ~ 15V

VOLTAGE RANGE

88 ~ 132VAC / 176 ~ 264VAC auto switch; 248 ~ 370VDC

VOLTAGE TOLERANCE

±2.0%

WITHSTAND VOLTAGE

I/P-O/P:3KVAC; I/P-FG:1.5KVAC; O/P-FG:0.5KVAC

Datasheet

MeanWell=LPS-100-13.5=datasheet-9658847561.pdf

339 KiB

Download

Extracted Text

100W Single Output without PFC Function LPS-100 series Features : Universal AC input / Full range Protections: Short circuit / Overload / Over voltage Cooling by free air convection 100% full load burn-in test Fix switching frequency at 134KHz 2 years warranty SPECIFICATION MODEL LPS-100-3.3 LPS-100-5 LPS-100-7.5 LPS-100-12 LPS-100-13.5 LPS-100-15 LPS-100-24 LPS-100-27 LPS-100-48 DC VOLTAGE 3.3V 5V 7.5V 12V 13.5V 15V 24V 27V 48V RATED CURRENT 20A 20A 13.3A 8.4A 7.5A 6.7A 4.2A 3.8A 2.1A CURRENT RANGE 0 ~ 20A 0 ~ 20A 0 ~ 13.3A 0 ~ 8.4A 0 ~ 7.5A 0 ~ 6.7A 0 ~ 4.2A(6A 10s) 0 ~ 3.8A 0 ~ 2.1A RATED POWER 66W 100W 99.75W 100.8W 101.25W 100.5W 100.8W(144W 10s) 102.6W 100.8W RIPPLE & NOISE (max.) Note.2 150mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 150mVp-p 150mVp-p 200mVp-p OUTPUT VOLTAGE ADJ. RANGE 3 ~ 3.6V 4.5 ~ 5.7V 6 ~ 9V 10 ~ 13.2V 12 ~ 15V 13.5 ~ 18V 20 ~ 26.4V 26 ~ 32V 41 ~ 56V VOLTAGE TOLERANCE Note.3 3.0% 3.0% 2.0% 2.0% 2.0% 2.0% 1.0% 1.0% 1.0% LINE REGULATION 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% LOAD REGULATION 2.0% 2.0% 1.5% 1.5% 1.5% 1.5% 0.5% 0.5% 0.5% SETUP, RISE TIME 800ms, 50ms/230VAC 1200ms, 50ms/115VAC at full load HOLD UP TIME (Typ.) 20ms/230VAC 20ms/115VAC at full load VOLTAGE RANGE 88 ~ 132VAC / 176 ~ 264VAC auto switch 248 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz EFFICIENCY(Typ.) 69% 77% 77% 79% 79% 80% 80% 81% 81% INPUT AC CURRENT (Typ.) 2.3A/115VAC 1.5A/230VAC INRUSH CURRENT (Typ.) COLD START 30A/115VAC 60A/230VAC LEAKAGE CURRENT <1mA / 240VAC 105 ~ 140% (+24V: above 6.5A) rated output power OVERLOAD Protection type : Hiccup mode, recovers automatically after fault condition is removed PROTECTION 3.8 ~ 4.45V 5.75 ~ 6.75V 9.4 ~ 10.9V 13.8 ~ 16.2V 15.5 ~ 18.2V 18 ~ 21V 27.6 ~ 32.4V 33.7 ~ 39.2V 57.6 ~ 67.2V OVER VOLTAGE Protection type : Hiccup mode, recovers automatically after fault condition is removed -10 ~ +60 (Refer to "Derating Curve") WORKING TEMP. WORKING HUMIDITY 20 ~ 90% RH non-condensing ENVIRONMENT STORAGE TEMP., HUMIDITY -20 ~ +85 , 10 ~ 95% RH TEMP. COEFFICIENT 0.05%/ (0 ~ 50 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes VIBRATION SAFETY STANDARDS UL60950-1, TUV EN60950-1 approved WITHSTAND VOLTAGE I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH EMC (Note 4) Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3 EMC EMISSION Compliance to EN61000-4-2,3,4,5,6,11, light industry level, criteria A EMC IMMUNITY MTBF 203.6Khrs min. MIL-HDBK-217F (25 ) OTHERS DIMENSION 222*62*32mm (L*W*H) 0.45Kg; 24pcs/12.5Kg/1.39CUFT PACKING 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. NOTE 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on http://www.meanwell.com) 5. If the input range 85V-89V, the output load is changed from 0A-rated load, There will be reduced 20V for 1second (LPS-100-24). 6. Mounting holes M1 and M2 should be grounded for EMI purposes. File Name:LPS-100-SPEC 2011-08-10 4- 3.5 100W Single Output without PFC Function LPS-100 series Mechanical Specification Unit:mm 222 212 5 FG CN2 8 CN1 7 1 6 2 5 3 4 4 3 5 FS1 2 AC FUSE 1 F4A/250V +V ADJ. AC Input Connector (CN1) : JST B5P-VH or equivalent DC Output Connector (CN2) : JST B8P-VH or equivalent Pin No. Assignment Mating Housing Terminal Pin No. Assignment Mating Housing Terminal 1 FG 1,2,3,4 +V JST VHR JST SVH-21T-P1.1 or equivalent or equivalent 2,4 No pin JST VHR JST SVH-21T-P1.1 5,6,7,8 -V or equivalent or equivalent 3 AC/N 5 AC/L Block Diagram fosc : 135KHz 115/230VAC RECTIFIERS RECTIFIERS EMI POWER +V & I/P AUTO & SWITCHING FILTER -V FILTER SWITCH FILTER DETECTION CIRCUIT FG PWM O.L.P. CONTROL O.V.P. Derating Curve Static Characteristics (12V) 13 300 18 CFM min 100 Forced Air +12V 12 250 80 11 200 LPS-100-5V 10 150 60 Convection (3.3V,7.5V~48V) 9 100 40 +12V 8 50 20 7 25 -10 0 10 20 30 40 50 60 (HORIZONTAL) 60 80 100 120 140 160 180 200 220 240 264 AMBIENT TEMPERATURE ( ) INPUT VOLTAGE (V) 60Hz File Name:LPS-100-SPEC 2011-08-10 LOAD (%) 62 3max. 32 52 5 OUTPUT VOLTAGE (V) OUTPUT RIPPLE (mVp-p)

Frequently asked questions

At GID Industrial (Elite.Parts' parent company), we specialize in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

Warranties differ by part and by which suppliers we use to procure it for you. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Elite.Parts can ship via FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Absolutely! We are happy to serve customers regardless of location. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

All major credit cards are accepted: Visa, MasterCard, Discover, and American Express. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products