30W Single Output Industrial DIN Rail Power Supply DR-30 series Features : Universal AC input/Full range Protections: Short circuit / Overload / Over voltage Cooling by free air convection Can be installed on DIN rail TS-35/7.5 or 15 Isolation class LED indicator for power on 100% full load burn-in test 3 years warranty SPECIFICATION MODEL DR-30-5 DR-30-12 DR-30-15 DR-30-24 DC VOLTAGE 5V 12V 15V 24V RATED CURRENT 3A 2A 2A 1.5A CURRENT RANGE 0 ~ 3A 0 ~ 2A 0 ~ 2A 0 ~ 1.5A RATED POWER 15W 24W 30W 36W RIPPLE & NOISE (max.) Note.2 80mVp-p 120mVp-p 120mVp-p 150mVp-p OUTPUT VOLTAGE ADJ. RANGE 4.75 ~ 5.5V 10.8 ~ 13.2V 13.5 ~ 16.5V 21.6 ~ 26.4V VOLTAGE TOLERANCE Note.3 2.0% 1.0% 1.0% 1.0% LINE REGULATION 1.0% 1.0% 1.0% 1.0% LOAD REGULATION 1.0% 1.0% 1.0% 1.0% SETUP, RISE TIME 100ms, 30ms/230VAC 100ms, 30ms/115VAC at full load HOLD UP TIME (Typ.) 100ms/230VAC 21ms/115VAC at full load VOLTAGE RANGE 85 ~ 264VAC 120 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz INPUT EFFICIENCY (Typ.) 74% 81% 82% 83% AC CURRENT (Typ.) 0.88A/115VAC 0.48A/230VAC INRUSH CURRENT (Typ.) COLD START 15A/115VAC 30A/230VAC 105 ~ 160% rated output power OVERLOAD Protection type : Constant current limiting, recovers automatically after fault condition is removed PROTECTION 5.75 ~ 6.75V 13.8 ~ 16.2V 17.25 ~ 20.25V 27.6 ~ 32.4V OVER VOLTAGE Protection type : Shut down o/p voltage, re-power on to recover -20 ~ +60 (Refer to "Derating Curve") WORKING TEMP. 20 ~ 90% RH non-condensing WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +85 , 10 ~ 95% RH TEMP. COEFFICIENT 0.03%/ (0 ~ 50 VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6 SAFETY STANDARDS UL60950-1, TUV EN60950-1 approved, Design refer to EN50178 WITHSTAND VOLTAGE I/P-O/P:3KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P:100M Ohms / 500VDC / 25 / 70% RH EMC (Note 4) Compliance to EN55011, EN55022 (CISPR22) Class B, EN61000-3-2,-3 EMC EMISSION EMC IMMUNITY Compliance to EN61000-4-2, 3, 4, 5, 6, 8, 11, EN55024, EN61000-6-2, EN61204-3, heavy industry level, criteria A MTBF 441.5K hrs min. MIL-HDBK-217F (25 ) OTHERS DIMENSION 78*93*56mm (W*H*D) 0.27Kg; 48pcs/14Kg/1.02CUFT PACKING 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. NOTE 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. File Name:DR-30-SPEC 2011-06-17 3 27.4 12.2 5 5 5 37.75 5 78 47 56 35 30W Single Output Industrial DIN Rail Power Supply DR-30 series Mechanical Specification Case No. 918B Unit:mm 68 45 Terminal Pin No. Assignment Pin No. Assignment Pin No. Assignment 46.5 46.5 1 AC/N 5,6 -V 2 AC/L 7 LED 93 3,4 +V 8 +V ADJ. 8 6 5 4 3 7 2 ADMISSIBLE DIN-RAIL:TS35/7.5 OR TS35/15 1 Block Diagram RECTIFIERS POWER RECTIFIERS +V EMI I/P & SWITCH- & FILTER -V FILTER ING FILTER DETECTION CIRCUIT CONTROL O.L.P. O.V.P. Derating Curve Output Derating VS Input Voltage 100 100 90 80 80 70 60 60 40 50 20 40 -20 0 10 20 30 40 50 60 70 (VERTICAL) 85 95 100 115 120 140 160 180 200 220 240 264 AMBIENT TEMPERATURE ( ) INPUT VOLTAGE (VAC) 60Hz File Name:DR-30-SPEC 2011-06-17 LOAD (%) LOAD (%)