Manufacturers
MARTEK POWER 1012D12HN
Description
Martek Power 1012D12HN DCDC Converter - Nominal Input: 12 VDC - Output1: 12 VDC Output2: -12 VDC, 0.416 A - Total Power: 9.984 W
Part Number
1012D12HN
Price
Request Quote
Manufacturer
MARTEK POWER
Lead Time
Request Quote
Category
PRODUCTS - 1
Specifications
Agency Approvals
UL, CSA, TUV and CE (LVD, 48 Vin Models)
Case Material
Aluminum baseplate with black anodized aluminum case
Demonstrated MTBF
>5 million hours at +40ºC
Efficiency
See Available Models Chart
Humidity
Up to 95%, Non-condensing
Input Filtering
L-C Network
Input Under Voltage Shutdown
8V (9-18) , 8V (9-36), 16V (18-75) VDC
Input Voltage Range
9-18, 9-36, 18-75 VDC
Isolation (Input to Output)
1500VDC minimum (1 minute)
Isolation Capacitance
1200pF
Line Regulation
+/-0.5% Low Line to High Line
Load Regulation
+/-0.5% (Singles), +/-1.0% (Duals) Min Load to Full Load
Maximum Case Temperature
105ºC Baseplate
Minimum Load Requirements
0% (Single Output), 10% (Dual Output)
No Load Input Current
10mA
Operating Temperature Range (Ambient)
-40ºC to +85ºC, See 1000HN Series Data Sheet for Derating curves.
Output Voltage Accuracy
+/- 1%
Output Voltage Adjustment
N/A
Over Voltage Protection
Standard
Reliability (MTBF per Mil-HDBK-217)
>1.46 million hours, +25ºC, Ground Benign
Ripple and Noise
50mV or 1% pk-pk, 20MHz Bandwidth
Short Circuit Protection
Continuous (Hiccup Mode)
Storage Temperature Range
-55ºC to +125ºC
Switching Frequency
400KHz, Fixed
Temperature Coefficient
+/-0.02% / ºC
Total Error Band
+/-2% Max. (Singles), +/-3% Max. (Duals)
Transient Response/Recovery Time
200µS, 25% Load Step
Vibration
5Grms, 5Hz to 2KHz
Voltage Balance
+/-2%, Dual Output Models only
Weight
0.57 oz (16g)
Features
- 2:1 and 4:1 Input Voltage Range Models
- Industry Standard 1” x 2” x 0.375” Footprint
- Single & Dual Output Models
- Unencapsulated construction
Datasheet
Extracted Text
58 S T A N D A R D D C / D C C O N V E R T E R S 1000HN series 8 to 10 watts Key Features: • Unencapsulated construction Input Characteristics • Single & Dual Output Models Input Voltage Range: 9-18, 9-36, 18-75 VDC • 2:1 and 4:1 Input Input Under Voltage Shutdown 8V (9-18) , 8V (9-36), 16V (18-75) VDC Voltage Range Input Filtering: L-C Network Models Efficiency: See Available Models Chart • Industry Standard 1” No Load Input Current: 10mA x 2” x 0.375” Footprint Output Characteristics Output Voltage Accuracy: +/- 1% Ideally Suited For: Output Voltage Adjustment: N/A • Telecom equipment Total Error Band: +/-2% Max. (Singles), +/-3% Max. (Duals) Voltage Balance: +/-2%, Dual Output Models only • Mixed analog/digital Minimum Load Requirements: 0% (Single Output), 10% (Dual Output) subsystems Line Regulation: +/-0.5% Low Line to High Line • Distributed power Load Regulation: +/-0.5% (Singles), +/-1.0% (Duals) Min Load networks to Full Load Ripple and Noise: 50mV or 1% pk-pk, 20MHz Bandwidth Transient Response/Recovery Time: 200µS, 25% Load Step Temperature Coefficient: +/-0.02% / ºC Short Circuit Protection: Continuous (Hiccup Mode) Over Voltage Protection: Standard Environmental Characteristics Operating Temperature Range (Ambient): -40ºC to +85ºC, See 1000HN Series Data Sheet for Derating curves. Storage Temperature Range: -55ºC to +125ºC Maximum Case Temperature: 105ºC Baseplate Humidity: Up to 95%, Non-condensing Vibration 5Grms, 5Hz to 2KHz Reliability (MTBF per Mil-HDBK-217): >1.46 million hours, +25ºC, Ground Benign Demonstrated MTBF: >5 million hours at +40ºC General Characteristics Switching Frequency: 400KHz, Fixed Isolation (Input to Output): 1500VDC minimum (1 minute) Isolation Capacitance: 1200pF Weight: 0.57 oz (16g) Case Material: Aluminum baseplate with black anodized aluminum case Agency Approvals UL, CSA, TUV and CE (LVD, 48 Vin Models) Additional Features Remote Shutdown (Designated by optional “-R” suffix) Supply On: Open or >3.5 VDC Supply Off: <0.8 VDC 59 Available Models Input Nominal Voltage Output Max. Output Model Input Voltage Range Voltage Current Efficiency @ (VDC) (VDC) (VDC) (mA) Full-Load (%) 1003S12HN 12 9-18 3.3 2400 76 1005S12HN 12 9-18 5.0 2000 80 1012S12HN 12 9-18 12.0 833 82 1015S12HN 12 9-18 15.0 667 83 1005D12HN 12 9-18 +/-5.0 +/-1200* 80 1012D12HN 12 9-18 +/-12.0 +/-600* 82 1015D12HN 12 9-18 +/-15.0 +/-500* 83 1003S24HN 24 9-36 3.3 2200 77 1005S24HN 24 9-36 5.0 1600 81 1012S24HN 24 9-36 12.0 667 82 1015S24HN 24 9-36 15.0 533 83 1005D24HN 24 9-36 +/-5.0 +/-1000* 81 1012D24HN 24 9-36 +/-12.0 +/-500* 83 1015D24HN 24 9-36 +/-15.0 +/-400* 83 1003S48HN 48 18-75 3.3 2400 78 1005S48HN 48 18-75 5.0 2000 82 1012S48HN 48 18-75 12.0 833 86 1015S48HN 48 18-75 15.0 667 87 1005D48HN 48 18-75 +/-5.0 +/-1200* 82 1012D48HN 48 18-75 +/-12.0 +/-600* 83 1015D48HN 48 18-75 +/-15.0 +/-500* 84 *Total output power not to exceed 10W (8W for 24Vin models). Pinout Chart Outline Drawing 0.40 0.40 10.16 10.16 0.10 Pin Single Duals 0.14 2.50 3.43 1 +Vin +Vin 2 -Vin -Vin VENT SLOTS ARE 3 +Vout +Vout TYP. FOR TWO LONG SIDES ONLY 34 5 4 No Pin COMMON 0.80 2.00 5 -Vout -Vout 20.32 50.80 6 *REMOTE ON/OFF *REMOTE ON/OFF 12 6 * OPTIONAL - PRESENT ON -R MODELS ONLY 0.60 15.20 0.02 0.51 0.40 0.20 0.30 PIN DIA 0.04 10.16 5.08 7.62 (1.02) (TYP 7 PLCS 0.38 9.53 1.00 25.40 All specifications are typical at 25 degrees C with nominal input voltage and full output unless otherwise noted. Specifications are subject to change without notice. All dimensions are typical.
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the 1012D12HN have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
Martek Power 1000HN Dual Output DC/DC Converter
Martek Power 1003S12HN DCDC Converter - Nominal Input: 12 VDC - Output: 3.3 VDC, 2.4 A - Total Power...
Nominal Input: 24 VDC - Output: 3.3 VDC, 2 A - Total Power: 6.6 W
Nominal Input: 48 VDC - Output: 3.3 VDC, 2.4 A - Total Power: 7.92 W
Nominal Input: 12 VDC - Output1: 5 VDC Output2: -5 VDC, 1 A - Total Power: 10 W
Martek Power 1005D24HN DCDC Converter - Nominal Input: 24 VDC - Output1: 5 VDC Output2: -5 VDC, 0.75...
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods