Elite.Parts

Description

Martek Power 1005D24HN DCDC Converter - Nominal Input: 24 VDC - Output1: 5 VDC Output2: -5 VDC, 0.75 A - Total Power: 7.5 W

Part Number

1005D24HN

Price

Request Quote

Manufacturer

MARTEK POWER

Lead Time

Request Quote

Category

PRODUCTS - 1

Specifications

Agency Approvals

UL, CSA, TUV and CE (LVD, 48 Vin Models)

Case Material

Aluminum baseplate with black anodized aluminum case

Demonstrated MTBF

>5 million hours at +40ºC

Efficiency

See Available Models Chart

Humidity

Up to 95%, Non-condensing

Input Filtering

L-C Network

Input Under Voltage Shutdown

8V (9-18) , 8V (9-36), 16V (18-75) VDC

Input Voltage Range

9-18, 9-36, 18-75 VDC

Isolation (Input to Output)

1500VDC minimum (1 minute)

Isolation Capacitance

1200pF

Line Regulation

+/-0.5% Low Line to High Line

Load Regulation

+/-0.5% (Singles), +/-1.0% (Duals) Min Load to Full Load

Maximum Case Temperature

105ºC Baseplate

Minimum Load Requirements

0% (Single Output), 10% (Dual Output)

No Load Input Current

10mA

Operating Temperature Range (Ambient)

-40ºC to +85ºC, See 1000HN Series Data Sheet for Derating curves.

Output Voltage Accuracy

+/- 1%

Output Voltage Adjustment

N/A

Over Voltage Protection

Standard

Reliability (MTBF per Mil-HDBK-217)

>1.46 million hours, +25ºC, Ground Benign

Ripple and Noise

50mV or 1% pk-pk, 20MHz Bandwidth

Short Circuit Protection

Continuous (Hiccup Mode)

Storage Temperature Range

-55ºC to +125ºC

Switching Frequency

400KHz, Fixed

Temperature Coefficient

+/-0.02% / ºC

Total Error Band

+/-2% Max. (Singles), +/-3% Max. (Duals)

Transient Response/Recovery Time

200µS, 25% Load Step

Vibration

5Grms, 5Hz to 2KHz

Voltage Balance

+/-2%, Dual Output Models only

Weight

0.57 oz (16g)

Features

2:1 and 4:1 Input Voltage Range Models
Industry Standard 1” x 2” x 0.375” Footprint
Single & Dual Output Models
Unencapsulated construction

Datasheet

MartekPower-1003S12HN-ds1-138086738.pdf

358 KiB

Download

Extracted Text

58 S T A N D A R D D C / D C C O N V E R T E R S 1000HN series 8 to 10 watts Key Features: • Unencapsulated construction Input Characteristics • Single & Dual Output Models Input Voltage Range: 9-18, 9-36, 18-75 VDC • 2:1 and 4:1 Input Input Under Voltage Shutdown 8V (9-18) , 8V (9-36), 16V (18-75) VDC Voltage Range Input Filtering: L-C Network Models Efficiency: See Available Models Chart • Industry Standard 1” No Load Input Current: 10mA x 2” x 0.375” Footprint Output Characteristics Output Voltage Accuracy: +/- 1% Ideally Suited For: Output Voltage Adjustment: N/A • Telecom equipment Total Error Band: +/-2% Max. (Singles), +/-3% Max. (Duals) Voltage Balance: +/-2%, Dual Output Models only • Mixed analog/digital Minimum Load Requirements: 0% (Single Output), 10% (Dual Output) subsystems Line Regulation: +/-0.5% Low Line to High Line • Distributed power Load Regulation: +/-0.5% (Singles), +/-1.0% (Duals) Min Load networks to Full Load Ripple and Noise: 50mV or 1% pk-pk, 20MHz Bandwidth Transient Response/Recovery Time: 200µS, 25% Load Step Temperature Coefficient: +/-0.02% / ºC Short Circuit Protection: Continuous (Hiccup Mode) Over Voltage Protection: Standard Environmental Characteristics Operating Temperature Range (Ambient): -40ºC to +85ºC, See 1000HN Series Data Sheet for Derating curves. Storage Temperature Range: -55ºC to +125ºC Maximum Case Temperature: 105ºC Baseplate Humidity: Up to 95%, Non-condensing Vibration 5Grms, 5Hz to 2KHz Reliability (MTBF per Mil-HDBK-217): >1.46 million hours, +25ºC, Ground Benign Demonstrated MTBF: >5 million hours at +40ºC General Characteristics Switching Frequency: 400KHz, Fixed Isolation (Input to Output): 1500VDC minimum (1 minute) Isolation Capacitance: 1200pF Weight: 0.57 oz (16g) Case Material: Aluminum baseplate with black anodized aluminum case Agency Approvals UL, CSA, TUV and CE (LVD, 48 Vin Models) Additional Features Remote Shutdown (Designated by optional “-R” suffix) Supply On: Open or >3.5 VDC Supply Off: <0.8 VDC 59 Available Models Input Nominal Voltage Output Max. Output Model Input Voltage Range Voltage Current Efficiency @ (VDC) (VDC) (VDC) (mA) Full-Load (%) 1003S12HN 12 9-18 3.3 2400 76 1005S12HN 12 9-18 5.0 2000 80 1012S12HN 12 9-18 12.0 833 82 1015S12HN 12 9-18 15.0 667 83 1005D12HN 12 9-18 +/-5.0 +/-1200* 80 1012D12HN 12 9-18 +/-12.0 +/-600* 82 1015D12HN 12 9-18 +/-15.0 +/-500* 83 1003S24HN 24 9-36 3.3 2200 77 1005S24HN 24 9-36 5.0 1600 81 1012S24HN 24 9-36 12.0 667 82 1015S24HN 24 9-36 15.0 533 83 1005D24HN 24 9-36 +/-5.0 +/-1000* 81 1012D24HN 24 9-36 +/-12.0 +/-500* 83 1015D24HN 24 9-36 +/-15.0 +/-400* 83 1003S48HN 48 18-75 3.3 2400 78 1005S48HN 48 18-75 5.0 2000 82 1012S48HN 48 18-75 12.0 833 86 1015S48HN 48 18-75 15.0 667 87 1005D48HN 48 18-75 +/-5.0 +/-1200* 82 1012D48HN 48 18-75 +/-12.0 +/-600* 83 1015D48HN 48 18-75 +/-15.0 +/-500* 84 *Total output power not to exceed 10W (8W for 24Vin models). Pinout Chart Outline Drawing 0.40 0.40 10.16 10.16 0.10 Pin Single Duals 0.14 2.50 3.43 1 +Vin +Vin 2 -Vin -Vin VENT SLOTS ARE 3 +Vout +Vout TYP. FOR TWO LONG SIDES ONLY 34 5 4 No Pin COMMON 0.80 2.00 5 -Vout -Vout 20.32 50.80 6 *REMOTE ON/OFF *REMOTE ON/OFF 12 6 * OPTIONAL - PRESENT ON -R MODELS ONLY 0.60 15.20 0.02 0.51 0.40 0.20 0.30 PIN DIA 0.04 10.16 5.08 7.62 (1.02) (TYP 7 PLCS 0.38 9.53 1.00 25.40 All specifications are typical at 25 degrees C with nominal input voltage and full output unless otherwise noted. Specifications are subject to change without notice. All dimensions are typical.

Frequently asked questions

At GID Industrial (Elite.Parts' parent company), we specialize in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

Warranties differ by part and by which suppliers we use to procure it for you. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Elite.Parts can ship via FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Absolutely! We are happy to serve customers regardless of location. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

All major credit cards are accepted: Visa, MasterCard, Discover, and American Express. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products