Manufacturers
MARCH 2CP-MD
Description
March 2CP-MD Mag Drive Pump 60Hz | 115V at 54W,0.92A | 230V at 57 W,0.53 A | 1Ph | 1 HP/35 Kw 3450 RPM
Part Number
2CP-MD
Price
Request Quote
Manufacturer
MARCH
Lead Time
Request Quote
Category
PRODUCTS - 2
Datasheet
Extracted Text
AC-2CP-MD, AC-2AP-MD BC-2CP-MD, BC-2AP-MD 2CP-MD, LC-2CP-MD DESCRIPTION & OPERATION: Series 2 are centrifugal magnetic drive pumps, eliminating the need for a shaft seal. Pumps can be serviced with a screwdriver. The “LC” model is hermetically encapsulated allowing the pump to run fully submerged or in open air for complete moisture protection. Model 2CP-MD must be run submerged only. See the parts list for a breakdown of parts. BC models have an encapsulated impeller magnet. Pumps are not self-priming, lack a suction lift, and thus require a flooded suction. Pumps cannot be run dry because the impeller requires the liquid being pumped for lubrication. For liquids with a specific gravity greater than water, have a higher viscosity, or for elevated temperatures, a trimmed impeller may be necessary. For application assistance, contact March Pump. BC-2CP-MD (12V & 24V DC) SPECIFICATIONS Models (Motor Style) Brush Brushless Max Flow 6 gpm - 22.7 lpm Max Head 15 ft / 6.5 psi - 4.6 m 23 ft / 9.9 psi - 7 m Inlet - Outlet 3/8” FPT & 3/4” MPT - 1/4” MPT Max Internal Pressure 50 psi - 3.4 bar Max Liquid Temperature 190°F / 87°C Motor Type DC 12V 43 - 3.5 38 - 3.1 Watts - Amps 24V 43 - 1.8 38 - 1.6 Restricted Voltage 12V 10V to 14V Range 24V 20V to 28V Hp / Kw - Rpm 1/25 / 0.029 - 3650 Electrical Connection 9” Leads 12” Leads Inches 4.44 x 4.50 x 7.61 4.44 x 4.50 x 5.46 Overall Pump Size (H x W x L) cm 11.2 x 11.4 x 19.3 11.2 x 11.4 x 13.8 Packed Weight 4 lbs / 1.8 kg 2 lbs / 0.9 kg The red lead is positive & blue lead is negative. ELECTRICAL: The AC-2CP-MD & AC-2AP-MD open air cooled motors as well as BC-2CP-MD & BC-2AP-MD blast cooled motors are available in different electrical configurations such as, 115V 50/60Hz, or 230V 50/60Hz, 1 phase. The 2CP-MD and LC-2CP-MD pumps are U.L. Recognized under File No. E80954. U.L. Recognition On Pumps Is For Water Only. LIMITED WARRANTY: March pumps are guaranteed only against defects in workmanship or materials for a period of one year from date of manufacture pumping water. For the complete warranty and to register online go to www.marchpump.com/warranty-registration AC-2CP-MD AC-2AP-MD BC-2CP-MD BC-2AP-MD 2CP-MD LC-2CP-MD SPECIFICATIONS Model Abbreviations CP: Threaded Ports AP: Smooth Ports CP: Threaded Ports AP: Smooth Ports CP: Threaded Ports LC: Liquid Cooled Motor Type AC: Air Cooled BC: Blast Cooled Submersible TE/ Submersible Rating / Duty U.L. listed motor / Continuous U.L. listed motor / Continuous U.L. listed motor / Continuous Max Flow 60Hz - 50Hz 5 gpm - 18.5 lpm 5 gpm - 18.5 lpm 5 gpm - 18.5 lpm Max Head 60Hz - 50Hz 13 ft / 5.7 psi - 2.7 m 13 ft / 5.7 psi - 2.7 m 13 ft / 5.7 psi - 2.7 m Inlet 3/8” FPT & 3/4” MPT 3/4” OD 3/8” FPT & 3/4” MPT 3/4” OD 3/8” FPT & 3/4” MPT Outlet 1/4” MPT 1/2” OD 1/4” MPT 1/2” OD 1/4” MPT Max Internal Pressure 50 psi - 3.4 bar 50 psi - 3.4 bar 50 psi - 3.4 bar 25 psi - 1.7 bar Max Liquid Temperature 190°F / 87°C 190°F / 87°C 130°F / 54°C Overall Pump Size Inches 4.5 x 3.5 x 7.39 4.5 x 3.5 x 7.77 4.56 x 3.91 x 8.36 4.56 x 3.91 x 8.73 4.13 x 4.87 x 6.11 (H x W x L) cm 11.4 x 8.8 x 18.7 11.4 x 8.8 x 19.7 11.5 x 9.9 x 21.2 11.5 x 9.9 x 22.1 10.4 x 12.3 x 15.5 Packed Weight 4.5 lbs / 2 kg 6.5 lbs / 3 kg 5 lbs / 2.3 kg Electrical 115V 3 ft (0.9 m) Cord 3 ft (0.9 m) Cord 6 ft Cord w/plug 6 ft (1.8 m) Cord Connection 230V 3 ft (0.9 m) Cord 3 ft (0.9 m) Cord 6 ft (1.8 m) Cord AC-2CP-MD & AC-2AP-MD BC-2CP-MD & BC-2AP-MD 2CP-MD & LC-2CP-MD Models 60Hz 50Hz 60Hz 50Hz 60Hz 50Hz 115V 77 - 1.2 84 - 1.2 73 - 1.2 75 - 1.2 54 - 0.92 58 - 1.1 Watts - Amps 1Ph 230V 75 - 0.6 82 - 0.6 66 - 0.5 66 - 0.5 57 - 0.53 59 - 0.72 Hp / Kw - Rpm 1/40 - 3450 0.018 - 2850 1/40 - 3450 0.018 - 2850 1/35 - 3450 0.021 - 2850 All specifications & data are based on pumping water & are intended as a guideline only. Specifications may vary with different motors. PARTS LIST MATERIALS IN CONTACT WITH SOLUTION: AC-2CP-MD & AC-2AP-MD - Polypropylene - Ceramic & Viton - Ceramic Magnet BC-2CP-MD & BC-2AP-MD - Polypropylene - Ceramic & Viton NOTE: When attaching the Drive Magnet to the motor shaft, position the face of the Drive Magnet 1/16 inch below the face of the Motor Bracket. # DESCRIPTION MATERIAL SIZE (Inches) QTY. PART # AC-2CP-MD AC-2AP-MD BC-2CP-MD BC-2AP-MD 1 Self-Tapping Screw Stainless #7-19 x 1-7/16 Lg. 6 0115-0062-1000 S S S S 2 Cover Polypropylene 3/8 FPT x 3/4 MPT 1 0125-0056-1000 S O S O 3 Cover Polypropylene 3/4 OD Smooth 1 0125-0096-1000 O S O S Viton 3/32 CS x 2-3/16 OD 1 0125-0065-1000 S S S S 4 “O” Ring Buna N 3/32 CS x 2-3/16 OD 1 0125-0066-1000 O O O O 5 Thrust Washer Ceramic 1 0130-0028-1000 S S S S Ceramic 1 0125-0061-1000 S S S S 6 Shaft Stainless 1 0125-0125-1000 O O O O 7 Impeller Encapsulated Polypropylene 1 0125-0087-0200 O O S S 8 Impeller Bare Magnet Polypropylene/Ceramic 1 0125-0055-0100 S S O O 9 Rear Housing Polypropylene 1/4 MPT 1 0125-0058-1000 S O S O 10 Rear Housing Polypropylene 1/2 OD Smooth 1 1008-0001-1000 O S O S 0.250 Bore 1 0125-0083-0100 S S S S 11 Drive Magnet 6mm (Brushless DC Motors ONLY) 1 0125-0083-0200 S (DC) 12 Screw Stainless #8-32 x 3/4 Lg. 4 0210-0036-1000 S (DC) 13 Screw Stainless #8-32 x 1/2 Lg. 4 0150-0015-1000 S S S S 14 Washer Stainless #8 4 0858-0004-1000 S S S S 15 Motor Bracket Plastic 1 0125-0069-1000 S S S S 16 Base Plastic 1 0125-0106-1000 S (DC) Motor (DC) 12V Brush 1 0809-0101-1000 S (DC) 17 Motor (DC) 24V Brush 1 0809-0103-1000 S (DC) Motor (DC) 12V Brushless 1 0125-0127-1000 S (DC) 18 Motor (DC) 24V Brushless 1 0125-0128-1000 S (DC) 19 Cover & “O” Ring 1/16 CS x 3 OD (Brushless DC Motors ONLY) 1 0125-0133-1000 O (DC) Motor, 115V, 50/60Hz, Air Cooled 1 0125-0052-1000 S S O O 20 Motor, 230V, 50/60Hz, Air Cooled 1 0125-0063-1000 S S O O Motor, 115V, 50/60Hz, Blast Cooled 1 0125-0088-1000 O O S S 21 Motor, 230V, 50/60Hz, Blast Cooled 1 0125-0089-1000 O O S S Legend: S = Standard, O = Option MATERIALS IN CONTACT WITH SOLUTION: - Polypropylene - Viton - Stainless Steel - Ceramic, - Ceramic Magnet. - When submerged also Epoxy, Buna N, and cord. # 2CP-MD LC-2CP-MD MATERIAL SIZE (Inches) QTY. 2CP-MD LC-2CP-MD A Self-Tapping Screw Stainless #7-19 x 1-7/16 Lg. 6 0115-0062-1000 B Cover Polypropylene 3/8 FPT x 3/4 MPT 1 0125-0056-1000 C “O” Ring Viton 3/32 CS x 2-3/16 OD 1 0125-0065-1000 D Thrust Washer Ceramic 1 0130-0028-1000 E Shaft Stainless 1 0125-0125-1000 F Impeller with Ceramic Magnet Polypropylene 1 0125-0055-0100 G Rear Housing Rear Housing & Plug Polypropylene 1/4 MPT 1 0125-0058-10000125-0057-0100 H Bracket “O” Ring Viton 1/16 CS x 2-3/8 OD 1 0125-0121-1000 I Cooling Tube Seal Buna N 2 0125-0007-1000 J Mounting Base Polypropylene 1 0125-0060-1000 K Marine Base (Not Shown) (Option) Polypropylene & Grommets 1 0125-0113-0100 L Base Screw Stainless 4 0125-0130-1000 M Plug (Motor Bracket) 1 0125-0110-1000 N “O” Ring Viton 1/16 CS x 7/16 OD 1 0210-0008-1000 O Epoxy Motor Assembly L.C. Epoxy Motor Assembly n/a Not Available NOTE: Contact Factory for other materials and/or parts not listed. 0125-0076-1000 R20
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the 2CP-MD have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods