MODEL: M6NBS specification sheets.) Screw Terminal Ultra-Slim Signal Conditioners M6N Series Isolation: Power to ground INSTALLATION BASE INSTALLATION Functions & Features Operating temperature: -20 to +55°C (-4 to +131°F) • Backplane to collectively supply power to the M6N Operating humidity: 30 to 90 %RH (non-condensing) modules in combination with the Power Supply Module Atmosphere: No corrosive gas or heavy dust (model: M6NPSx or M6-PSM) Mounting: Surface or DIN rail • UL approval Weight: M6NBS-08, -08P: 50 g (1.8 oz) without signal conditioners M6NBS-08A: 80 g (2.8 oz) without signal conditioners PERFORMANCE Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength: 2000 V AC @1 minute (power to ground) STANDARDS & APPROVALS CE conformity: EMC Directive (2004/108/EC) MODEL: M6NBS–[1][2] EN 61000-6-4 (EMI) EN 61000-6-2 (EMS) ORDERING INFORMATION Approval: • Code number: M6NBS-[1][2] UL/C-UL nonincendive Class I, Division 2, Specify a code from below for [1] and [2]. Groups A, B, C, and D hazardous locations (e.g. M6NBS-08/UL) (ANSI/ISA-12.12.01, CAN/CSA-C22.2 No.213) UL/C-UL general safety requirements (UL 61010-1, CAN/CSA-C22.2 No.61010-1) [1] NUMBER OF SLOTS 08: 8 slots 08P: 8 slots (for extension) 08A: 8 slots + power supply slot (for model M6-PSM) (UL not available) [2] OPTIONS STANDARDS & APPROVALS blank: CE marking /UL: UL approval (CE marking) RELATED PRODUCTS • M6N series signal conditioners (Not able to supply to AC power signal conditioners (M2 code)) • Power supply module (model: M6NPS1) • Power supply module (model: M6NPS2) • Power supply module (model: M6-PSM) • Blank filler module (model: M6NDM) GENERAL SPECIFICATIONS Capacity: Up to 48 modules with Extension Bases (The usable number of signal conditioners depends on the capacity of the power supply module. Refer to the M6-PSM http://www.m-system.co.jp/ M6NBS SPECIFICATIONS ES-7915 Rev.6 Page 1/5 MODEL: M6NBS EXTERNAL VIEW Install signal conditioners from the slot at either end. Power Supply Modules (M6NPS1 or M6NPS2) could be mounted at any slots, however, installing them at either end is generally recommended. Mount the power supply module (M6-PSM) on the power supply slot of M6NBS-08A. � M6NBS-08, M6NBS-08P � M6NBS-08A Power I/O I/O or Power Module Module Module 1 2 • • • • • • 8 1 2 • • • • • • 8 http://www.m-system.co.jp/ M6NBS SPECIFICATIONS ES-7915 Rev.6 Page 2/5 MODEL: M6NBS DIMENSIONS unit: mm (inch) � M6NBS-08, M6NBS-08P 27 (1.06) [5 (.20)] 11.5 (.45) 61.6 (2.43) [3 (.12)] 3–4.5 (.18) dia. MTG HOLE 2 (.08) deep DIN RAIL 35mm wide 22.5 (.89) 116 (4.57) 49.8 (1.96) � M6NBS-08A 3 (.12) 85 (3.35) [3 (.12)] [5 (.20)] 27 (1.06) 30.8 (1.21) 3–4.5 (.18) dia. MTG HOLE 2 (.08) deep DIN RAIL 35mm wide 49.8 (1.96) 22.5 (.89) 116 (4.57) http://www.m-system.co.jp/ M6NBS SPECIFICATIONS ES-7915 Rev.6 Page 3/5 5 (.20) 5 (.20) 101 (3.98) 5 (.20) 5 (.20) 101 (3.98) 72 (2.83) 14 (.55) 72 (2.83) 14 (.55) 18 (.71) 18 (.71) 51 (2.01) 2 (.08) 51 (2.01) 2 (.08) 16 (.63) MODEL: M6NBS MOUNTING REQUIREMENTS unit: mm (inch) ■ MOUNTING DIRECTION The unit must be mounted on a vertical panel. Mounting in any other angle will cause internal temperature to rise, may shorten the product’s life expectation or deteriorate its performance. Panel ceiling or wiring conduit (height ≤50 mm or 2 in.) M6NBS 10 10 (.39) (.39) Panel bottom or wiring conduit (height ≤50 mm or 2 in.) ■ SURFACE MOUNTING • M6N BS-08 • M6N BS-08A 30.8 (1.21) 3-M4 3-M4 49.8 (1.96) 49.8 (1.96) • M6N BS-08 + M6NBS-08P • M6NBS-08A + M6NBS-08P 30.8 (1.21) 1 1 n-M4 * n-M4 * 49.8 (1.96) 11.8 49.8 (1.96) 49.8 (1.96) 49.8 (1.96) (.46) 11.8 (.46) *1. n = (Number of bases) x 3 http://www.m-system.co.jp/ M6NBS SPECIFICATIONS ES-7915 Rev.6 Page 4/5 72 (2.83) 14 (.55) 72 (2.83) 14 (.55) 18 (.71) 40 (1.6) 72 (2.83) 14 (.55) 72 (2.83) 14 (.55) MODEL: M6NBS Specifications are subject to change without notice. http://www.m-system.co.jp/ M6NBS SPECIFICATIONS ES-7915 Rev.6 Page 5/5