MODEL: M6DYV R: 24 V DC Euro Terminal Ultra-Slim Signal Conditioners M6D Series (Operational voltage range 24 V ±10 %, ripple 10 %p-p max.) ISOLATOR [4] OPTIONS (multiple selections) Functions & Features RESPONSE TIME (0 – 90 %) • 5.9-mm wide ultra-slim design blank: Standard (≤ 0.5 sec.) • Low profile allows the M6D module mounted in a 120-mm /K: Fast Response (Approx. 3.5 msec. voltage output; deep panel Approx. 25 msec. current output) • Galvanically isolates process instrumentation signals STANDARDS & APPROVALS • High-density mounting blank: CE marking • Power indicator LED /UL: UL approval (CE marking) • UL approval 5.9 (.23) GENERAL SPECIFICATIONS Connection Input and output: Euro terminal (torque 0.3 N·m) Power input: Via the Installation Base (model: M6DBS) 94 (3.70) (not available for AC power input) or Euro terminal (torque 0.3 N·m) Applicable wire size: 0.2 to 2.5 mm2 Housing material: Flame-resistant resin (black) 102 Isolation: Input to output to power (4.02) mm (inch) Zero adjustment: -2 to +2% (front) (Output code 4W: Adjustable at 0 V.) Span adjustment: 98 to 102 % (front) Power LED: Green light turns on when the power is supplied. MODEL: M6DYV-[1][2]-[3][4] INPUT SPECIFICATIONS • DC Current: Input resistor incorporated ORDERING INFORMATION • Code number: M6DYV-[1][2]-[3][4] Specify a code from below for each [1] through [4]. INSTALLATION (e.g. M6DYV-4W4W-R/K/UL) Power Consumption •AC Power input: Max. 2 VA •DC Power input: Approx. 0.45 W [1] INPUT / [2] OUTPUT Operating temperature: -20 to +55°C (-4 to +131°F) AA: 4 - 20 mA DC (Input resistance 50 Ω) Operating humidity: 30 to 90 %RH (non-condensing) / 4 - 20 mA DC (Load resistance 550 Ω max.) Mounting: Installation Base (model: M6DBS) or DIN rail A6: 4 - 20 mA DC (Input resistance 50 Ω) Weight: 60 g (2.1 oz) / 1 - 5 V DC (Load resistance 5000 Ω min.) 6A: 1 – 5 V DC (Input resistance 1 MΩ min.) / 4 - 20 mA DC (Load resistance 550 Ω max.) PERFORMANCE in percentage of span 66: 1 - 5 V DC (Input resistance 1 MΩ min.) Accuracy: ±0.1 % / 1 - 5 V DC (Load resistance 5000 Ω min.) Temp. coefficient: ±0.01 %/°C (±0.006 %/°F) 4W4W: -10 - +10 V DC (Input resistance 1 MΩ min.) Line voltage effect: ±0.1 % over voltage range / -10 - +10 V DC (Load resistance 20 kΩ min.) Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength: 2000 V AC @1 minute (input to output to power to ground) [3] POWER INPUT AC Power M2: 100 – 240 V AC (Operational voltage range 90 – 264 V, STANDARDS & APPROVALS 47 – 66 Hz) CE conformity: (UL not available) EMC Directive (2004/108/EC) DC Power EN 61000-6-4 (EMI) http://www.m-system.co.jp/ M6DYV SPECIFICATIONS ES-7821 Rev.7 Page 1/3 MODEL: M6DYV EN 61000-6-2 (EMS) Low Voltage Directive (2006/95/EC) EN 61010-1 Installation Category II Pollution Degree 2 Max. operating voltage 300 V Input or output to power: Reinforced insulation Input to output: Basic insulation Approval: UL/C-UL nonincendive Class I, Division 2, Groups A, B, C, and D hazardous locations (ANSI/ISA-12.12.01, CAN/CSA-C22.2 No.213) UL/C-UL general safety requirements (UL 61010-1, CAN/CSA-C22.2 No.61010-1) EXTERNAL VIEW (With the cover open) Power LED Zero Adj. Span Adj. DIMENSIONS unit: mm (inch) WIRE INSERTION ANGLE: approx. 7° 8–M3 EURO TERMINAL DIN RAIL HOOK 5 6 7 8 DIN RAIL 35mm wide 1 2 3 4 SCREWDRIVER [0.5 (.02)] INSERTION ANGLE : approx. 40° 5.9 (.23) 102 (4.02) • When mounting, no extra space is needed between units. http://www.m-system.co.jp/ M6DYV SPECIFICATIONS ES-7821 Rev.7 Page 2/3 94 (3.70) MODEL: M6DYV SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM Z S Isolation Low Drift Output + 1 5 + Amplifier Driver * INPUT OUTPUT – 2 6 – POWER LED 3 U(+) 7 POWER 4 V(–) 8 ** POWER *Input shunt resistor incorporated for current input. **Available only for DC power input type Specifications are subject to change without notice. http://www.m-system.co.jp/ M6DYV SPECIFICATIONS ES-7821 Rev.7 Page 3/3 CONNECTOR