® CoreExpress -ECO Next Generation Computer-On-Module Features ® Intel Atom™ Processor 512 MB, 1 GB, 2 GB SDDR2 soldered RAM 2 PCI Express Lanes SDIO/MMC SMBus GMBus/DDC LPC bus 2 Graphics Ports (LVDS & SDVO) HD Audio The CoreExpress-ECO is a Computer on Module (COM) implementation in a 58 mm x 65 mm format. It is based on the CoreExpress specification, a no-compro- 8 USB 2.0 mise new development that leaves the traditional PC interfaces behind. IDE CoreExpress modules are legacy-free, meaning they come with digital interfaces only; when an application requires analog signals, these can easily be implemented on the carrier board. The tiny module size stems from today’s advanced chip technology that Award BIOS not only reduces the required space but also allows for very low power processors. The low power requirements lead to minimum cooling efforts, decreasing the total di- Only 58 mm x 65 mm and 28 grams mensions further, when compared to existing solutions. 5 V only supply, 5 Watts The CoreExpress-ECO utilizes an Intel Atom processor and related Intel System Con- troller Hub US15W. The processor’s advanced micro-architecture retains the popular Extended temp. range -40 °C ... +85 °C (opt) X86 programming model. Multiple threads improve responsiveness delivering a better user experience. The computer module comes completely with up to 2 GB of SDDR2 RAM soldered to the board, graphics, MPEG2/4 support, LVDS and SDVO display ports, as well as HD audio streams. Two PCI Express lanes are available for external I/O and graphics. There are eight USB 2.0 ports, IDE, SDIO/MMC interface, SMBus, and LPC bus avail- able for even further expansion. All these signals are made available on a tiny 220 pin connector. CoreExpress-ECO features the LiPPERT Enhanced Management Technology (LEMT) based on an integrated system management controller (SMC). It handles the power sequencing and other housekeeping tasks, and provides a protected flash area for miscellaneous user information. An Developer’s kit is available to assist in the development of customer designed car- riers. It contains a CoreExpress-ECO module on an EPIC carrier board, a LCD module and power supply. Additionally, a “best practices” manual is included, detailing how to design an application specific carrier board for the CoreExpress-ECO. All necessary cables and full technical documentation are also included in the kit. Supported operating systems are Windows, VxWorks, QNX, and Linux. LiPPERT is an independent design house and manufacturer that develops and builds special customer specific solutions. Please ask for a specific quotation. LiPPERT ADLINK TECHNOLOGY Ampro ADLINK Technology, Inc. 5215 Hellyer-Avenue, #110 Hans-Thoma-Str. 11 · D-68163 Mannheim Phone +49 621 43214-0 · Fax +49 621 43214-30 San Jose, CA 95138, U.S.A. Toll Free (800) 966 5200 · Fax (408) 360 0222 sales@lippertembedded.com www.lippertembedded.com info@adlinktech.com ® CoreExpress -ECO Technical Specifications ® Board Format CoreExpress 58 mm x 65 mm Graphics Integrated graphics device (IGD) includes LVDS and SDVO display ports for simultan- ® Processor Intel Atom™ Z530 processor@ 1,6 GHZ or eous independent operation of 2 displays. ® Intel Atom™ Z510 processor @ 1,1 GHz • LVDS interface supports pixel color depth of 18 and 24 bits, 45 nm process 512K L2 cache • Max. pixel clock 112 MHz 533 MT/s FSB (equates to 1376x768 @85 Hz) USFF uFCBGA8, 13x14mm, 0.6mm pitch, • SDVO max. pixel clock 160 MHz 447 pins (equates to 1280x1024 @85 Hz) • SDVO for any external device HDMI/DVI, Core logic Intel System Controller Hub Analog, VGA/CRT, LVDS US15W (SCH) Full hardware acceleration for: 65 nm process • H.264 baseline profile L3, main profile 4.1 USFF uFCBGA3, 22x22mm, 0.6mm pitch, and high profile L4.1 1249 pins • MPEG2 main profile high level • MPEG4 simple profile L3, advanced RAM 512 MB, 1 GB, 2 GB SDDR2, 533 MHz. simple profile L5 Soldered on board • VC1 all profiles up to L3 • WMV9 simple profile medium level PCI Express 2 root ports Spec. Rev. 1.0a (2 lanes x 1) • WMV9 main profile high level • Each port supports 2.5 Gb/s bandwith • SD/HD TV broadcast up to 1080i in each direction • Low power “L-states” are supported USB • USB 1.1 with 3 UHCI controllers, • Hot-plug is supported • 2 USB 1.1 ports per controller (port 0-5) • External x1 graphics devices are supported • USB 2.2 with 1 EHCI controller with 8 ports, (internal GD must be disabled) ports 6 & 7 must be internal only to meet • Only SDVO or external graphics can be USB spec requirements used at one time • Debug port lives on Port 0 Port 2 can be USB client port, HD Audio High Definition Audio Controller supports USB On-The-Go is not supported 4 audio streams; 2 in, 2 out USB client connect signal • 1.8 V and 3.3 V I/O is supported (USBCC/GPIOSUS3) may be used to • Docking is supported detect host/client connection • Each stream can obtain up to 16 channels PATA (IDE) 1 port supports 2 devices (master/slave) SDIO/MMC Integrated Secure Digital I/O (SDIO) or with the following modes : Multimedia Card (MMC) Controller. • PIO Modes 0, 1, 2, 3, 4 Supports SDIO Rev. 1.1 and MMC Rev. • Single-word DMA Modes 0, 1, 2 4.0. SDIO/MMC interface permits x1 and • Multi-word DMA Modes 0, 1, 2 x4 I/O read/write modes. • Ultra-DMA Modes 0, 1, 2, 3, 4, 5 SDHC supported • Up to 100 MBytes/s in UDMA-100 mode SMBus Compatible with most I2C devices and Operating 0 °C … +60 °C (commercial) SMBus Spec. 1.0 for system management. temperature -20 °C … +60 °C (industrial) 2 MByte serial EEPROM on board -40 °C … +85 °C (extended, optional) GMBus/DDC I2C for display control Power +5 V +/- 5 %, ~5 Watts @1.6 GHz and with 1 GB RAM LPC Supports LPC 1.1 spec BIOS Award BIOS 1 MByte firmware hub (FWH) UL Certificate 20090826-E329059 Number Block Diagram LEMT Functions (implemented in SMC, accessible via SMBus; excerpt) Total operating hours Counts the number of hours the module has been run in minutes counter On-time counter Indicates the amount of time since last power on in seconds Power cycles counter Counts how often the module has been powered on Watchdog timer Set / Reset / Disable / Trigger Watchdog Timer System restart reason Power loss / Watchdog / External Reset In case of a boot failure, hardware signals tell external logic to boot from a Fail-safe-BIOS support Fail-Safe-BIOS Flash area 1024 bytes of Flash area for customer data 128 Bytes. Keys, ID’s, etc. can be stored in a write- and clear-protectable Protected flash area region Board identity Vendor ID / board ID / serial number ® Check www.CoreExpress.com for news and updates of the CoreExpress specification. LiPPERT ADLINK TECHNOLOGY Ampro ADLINK Technology, Inc. 5215 Hellyer-Avenue, #110 Hans-Thoma-Str. 11 · D-68163 Mannheim Phone +49 621 43214-0 · Fax +49 621 43214-30 San Jose, CA 95138, U.S.A. Toll Free (800) 966 5200 · Fax (408) 360 0222 sales@lippertembedded.com www.lippertembedded.com info@adlinktech.com ® CoreExpress -ECO Next Generation Computer-On-Module CoreExpress-ECO, bottom view CoreExpress-ECO, top view CoreExpress-ECO on EPIC carrier CoreExpress-ECO with heatsink Check www.lippertembedded.com for the most up-to-date information about the CoreExpress-ECO. Check www.CoreExpress.com for news and updates of the CoreExpress specification. Ordering Information Ordering Number Description t13-0002-10 CoreExpress-ECO, 1.6 GHz, 1 GB RAM, without heatsink t13-0004-10 CoreExpress-ECO, 1.1 GHz, 1 GB RAM, without heatsink Developer’s Kit CoreExpress-ECO with Intel Atom 1.6 GHz, 1 GB RAM, 0°…50 °C 808-0005-10 Operating system: Windows XP Embedded (Developer’s Version) Developer’s Kit, CoreExpress-ECO with Intel Atom 1.6 GHz, 1 GB RAM, 0°…50 °C 808-0006-10 Operating system: Linux Developer’s Kit, CoreExpress-ECO with Intel Atom 1.6 GHz, 1 GB RAM, 0°…50 °C 808-0007-10 Operating system: QNX Developer’s Kit, CoreExpress-ECO with Intel Atom 1.6 GHz, 1 GB RAM, 0°…50 °C 808-0010-10 Operating system: VxWorks 6.8 865-0020-10 Heat sink, passive, for CoreExpress-ECO Note: t denotes the temperature range. Substitute with 7 for commercial, 8 for industrial and 9 for extended temperature range Other processor and memory configurations are available on request. LiPPERT ADLINK TECHNOLOGY Ampro ADLINK Technology, Inc. 5215 Hellyer-Avenue, #110 Hans-Thoma-Str. 11 · D-68163 Mannheim Phone +49 621 43214-0 · Fax +49 621 43214-30 San Jose, CA 95138, U.S.A. Toll Free (800) 966 5200 · Fax (408) 360 0222 sales@lippertembedded.com www.lippertembedded.com info@adlinktech.com 02/12 · Specifications subject to change without notice · ©LiPPERT ADLINK TECHNOLOGY · Printed in Germany All mentioned trademarks are the properties of their respective holders.