Elite.Parts

Description

Larscom ACST-1500-DC02 Access-T 1500 | 15-Slot Shelf, Two DC Power Supplies

Part Number

ACST-1500-DC02

Price

Request Quote

Manufacturer

LARSCOM

Lead Time

Request Quote

Category

PRODUCTS - A

Specifications

115 V AC , 50 to 60 Hz

Amps/BTUs

2A@115V AC, 587 BTUs/hr (full chassis), 33.1 BTUs/hr per module

Data Rate

N x 56 Kbps or N x 64 Kbps (N

-48 V DC office battery (-43 to –53 V) (special order)

Electrical

EIA530 configurable to V.35 or RS442/449

Framing

T1: D4, ESF

Line Coding

T1: AMI, B8ZS

Line Rate

T1: 1.544 Mbps

Operating

0 to 50º C (32 to 122º F); Up to 95% relative humidity, non-condensing

Physical Interface

DB25S
RJ48C

Ports

Front- and rear-panel RS-232 ports; rear-panel RS-485 chain port

Shipping Weight

35 lb. (15.87 kg)

Size

10.5” H x 17” W x 18” D (26.6 x 43.2 x 45.7 cm) per shelf

SNMP Interface

RS-232 (SLIP/PPP); DS1 MIB (RFC 1406)

Terminal Interface

Menu-driven, VT100 or TV 925 ASCII terminal, to 9600 baud

Usage

19”/23” rack-mountable shelf

Features

Increases the cost-effectiveness and efficiency of T1/FT1 bandwidth and access lines
Provides advanced performance management and diagnostic features to increase system reliability
Reduces rack costs by housing 30 single T1 connections or 15 drop-an insert ports and 30 multiplexed DTE ports in a single 19” shelf
Simplifies network architecture and management by allowing two full shelves to be managed from a single location, with one IP address

Datasheet

Larscom=Accest1500=Datasheet1-348840954.pdf

438 KiB

Download

Extracted Text

2793_ProductCatalog.bk Page 62 Friday, November 14, 2003 5:32 PM TM Access-T 1500 Modular T1/FT1 Network Access The Access-T 1500 and its application mod- ules combine the features of a multiplexer, T1 CSU/DSU System CSU, and multi-port DSU to help organiza- tions take full advantage of T1 and FT1 net- works. This hot-swappable, modular system is ideal for Central Office and hub applications when 100% uptime is critical. One 19” rack-mountable shelf can accommo- date 15 application modules with up to 30 single-port T1 connections or 15 drop-and- insert auxiliary line ports and 30 multiplexed DTE ports. SPECIFICATIONS In addition to providing high CSU/DSU density Power in a small amount of rack space, the Access-T AC 115 V AC , 50 to 60 Hz 1500 also enables two full shelves, 30 DSUs, DC -48 V DC ofŢce battery (-43 to –53 V) (special order) to be managed from a single point, via SNMP, Amps/BTUs 2A@115V AC, 587 BTUs/hr (full chassis), 33.1 BTUs/hr per module and requires only one IP address for both Network Interface shelves. Line Rate T1: 1.544 Mbps Framing T1: D4, ESF Advanced performance management and Line Coding T1: AMI, B8ZS diagnostic functions cut maintenance costs; Physical Interface RJ48C and user-defined alarms and 24-hour perfor- DTE Interface mance registers provide crucial performance Data Rate N x 56 Kbps or N x 64 Kbps (N = 1 to 24) information when it’s needed. Some modules Electrical EIA530 conŢgurable to V.35 or RS442/449 also support true end-to-end monitoring of Physical Interface DB25S FT1 lines via RDL. Management Ports Front- and rear-panel RS-232 ports; rear-panel RS-485 chain port The Access-T 1500 provides flexible, high-den- Terminal Interface Menu-driven, VT100 or TV 925 ASCII terminal, to 9600 baud sity CSU/DSU configurations that reduce the SNMP Interface RS-232 (SLIP/PPP); DS1 MIB (RFC 1406) cost-per-port while optimizing T1/FT1 usage. Physical Characteristics Usage 19”/23” rack-mountable shelf BENEFITS Size 10.5” H x 17” W x 18” D (26.6 x 43.2 x 45.7 cm) per shelf Shipping Weight 35 lb. (15.87 kg) • Increases the cost-effectiveness and Environment efficiency of T1/FT1 bandwidth and Operating 0 to 50º C (32 to 122º F); Up to 95% relative humidity, non-condensing access lines Typical Application • Reduces rack costs by housing 30 With its high-density modular design and low cost-per-port, the Access-T 1500 is ideal as a hub single T1 connections or 15 drop-and- for single or multiplexed T1 and FT1 applications. insert ports and 30 multiplexed DTE ports in a single 19” shelf CAD/CAM VIDEO VIDEO CAD/CAM ROUTER VIDEO ROUTER VIDEO PBX ROUTER ROUTER ROUTER ROUTER • Simplifies network architecture and T1 T1 T1 T1 T1 T1 T1 T1 management by allowing two full shelves to be managed from a single T1/FT1 NETWORK location, with one IP address T1 • Provides advanced performance Access-T 1500 Access-T 1500 management and diagnostic features PBX T1 T1/FT1 to increase system reliability NETWORK Access-T ROUTER DDS ROUTER CSU/DSU CSU/DSU Access-T 62 ■ Intelligent CSU/DSUs and Access Routers Information subject to change without notice 2793_ProductCatalog.bk Page 63 Friday, November 14, 2003 5:32 PM BACKPANEL AND CABLE GUIDE ORDERING INFORMATION Description Model No. Access-T 1500 Models Model No. Power Access-T 1500, 15-slot shelf, one AC power supply ACST-1500-AC01 Access-T 1500, 15-slot shelf, one DC power supply (special order) ACST-1500-DC01 AC power cable, 6 ft. Provided DC power cable, 10 ft Provided Access-T 1500, 15-slot shelf, two AC power supplies ACST-1500-AC02 Access-T 1500, 15-slot shelf, two DC power supplies (special order) ACST-1500-DC02 Terminal Supervisory port (DB25P) Access-T 1500, 15-slot shelf, one AC and one DC power supply (spe- ACST-1500-ACDC DB25P to DB25S, xx ft. (xx=006, 015) 080-2613-0xx cial order) Network Port (RJ48C) Access-T 1500 management interface controller module ACST-MIC DTE Port Access-T 1500 management interface controller plus CSU/DSU, ACST-AM-MIC HSSI (SCSI-II 50-pin S) 1 DTE port, RDL functionality, no drop-and-insert SCSI-II P to SCSI-II P, xx ft. (xx = 06, 15, 25 or 50) 070-1203-0xx Access-T 1500 module with 1 CSU/DSU, 2 DTE ports, T1 ACST-AM-01 HSD (EIA530, DB25S) drop-and-insert, no RDL V.35 Access-T 1500 module with 2 CSU/DSUs, each with 1 DTE port, ACST-AM-101-D no drop-and-insert DB25P to M34S adapter, 1 ft. DATAADAP-V35 Related Products DB25P to M34S, (EIA530 to V.35) xx ft. 080-2443-xxx (xx = 001, M06, 015, 030, 050) Power supply, AC, for ACST-1500 PWR-PS01 DB25P to M34P, (EIA530 to V.35) xx ft. (xx = 06, 15, 25 or 50) 080-2263-0xx Power supply, DC, for ACST-1500 PWR-PS03 EIA530 Blank panel, 1 slot ACST-BP01 DB25P to DB25S, (EIA530 to EIA530) xx ft. (xx = 06, 15, 25 or 50) 080-2333-0xx Blank panel, 3 slots ACST-BP03 DB25P to DB25P, (DCE to DTE) xx ft. (xx = 06, 15, 25 or 50) 080-2433-0xx Blank panel, 6 slots ACST-BP06 DB25P to DB25P (DCE to DCE), xx ft. (xx = 06, 15, 25 or 50) 080-2373-0xx Patch panel, 19”, 24 RJ48 channels for T1 lines, 3ft. ACST-PPL-01 RS449 Patch panel, 23”, 24 RJ48 channels for T1 lines, 3ft. ACST-PPL-02 DB25P to DC37S,(EIA530 to RS449) xx ft. (xx = 06, 15, 25 or 50) 080-2453-0xx Patch panel, 19”, 24 RJ48 channels for T1 lines, 10ft. ACST-PPL-03 DB25P to DC37P, (EIA530 to RS449) xx ft. (xx = 06, 15, 25 or 50) 080-2273-0xx Patch panel, 19”, 24 RJ48 channels for T1 lines, 40ft. ACST-PPL-04 Patch panel, 19”, 24 RJ48 channels for T1 drop-and-insert, 3 ft. ACST-PPA-01 Note: M = molded connector, P = plug (male), and S = socket (female). Patch panel, 23”, 24 RJ48 channels for T1 drop-and-insert, 3 ft. ACST-PPA-02 Patch panel, 19”, 24 RJ48 channels for T1 drop-and-insert lines, 10ft. ACST-PPA-03 DC Alarm Supervisory External DTE Power Relay Port Clock Line Ports Ports Patch panel, 19”, 24 RJ48 channels for T1 drop-and-insert lines, 40ft. ACST-PPA-04 Converter module, RJ48C to DA15S screw down A80-LAK6-001 J2 LINE 9-15 J1 CRAFT PORT LINE 1-8 Converter module, RJ48C to DA15P screw down A80-LAK7-001 VT100 TV925 SELECT EXT CLOCK Mounting ears and hardware for ACST-1500, 19” rack A87-AK01-001 ALARM RELAY PS2 PS1 DTE PORTS NC GDN NO C NC GDN NO C Mounting ears and hardware for ACST-1500, 23” rack A87-AK02-001 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 SUPV PORT EXTERNAL DC POWER PS1 PS2 PS1 PS2 GND GND - 48V - 48V RTN RTN 1 1 2 2 PS2 CRAFT PORT CHS CHAIN PORT PS1 GND 12 J36 AUX 1-8 J37 AUX 9-15 AC Power Craft Port Chain Port Auxiliary Ports Don’t see the product configuration you need? Call your local reseller or 1-888-LARSCOM ■ 63 Intelligent CSU/DSUs and Access Routers

Frequently asked questions

At GID Industrial (Elite.Parts' parent company), we specialize in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

Warranties differ by part and by which suppliers we use to procure it for you. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Elite.Parts can ship via FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Absolutely! We are happy to serve customers regardless of location. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

All major credit cards are accepted: Visa, MasterCard, Discover, and American Express. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products