KONTRON VIPER830/566
Specifications
Bus Interface
PC/AT ISA bus or stand-alone operation; 100% IBM PC/AT compatible; PC/104-Plus VIPci compatible; Front Side Bus (66/100 MHz); AGP bus; PCI Bus (33 MHz); ISA Bus(8.33 MHz); PCI Bus Rev. 2.1
Cache
16/16 KB Instruction / Data Level 1; 128 KB internal 64-bit wide SPB non-blocking ECC Level 2 running at full CPU core speed
CPU
Intel Celeron processor 300A, 366, 433 MHz in PPGA370 Package and higher as technology becomes available; Intel 82440BX AGPset; 66/100 MHz system/memory bus
Data Path
64-bit on CPU and video memory bus; 32-bit on PCI bus (PC/104-Plus); 16-bit on ISA bus
Floppy Disk
Support for two drives (360 KB to 1.44 MB)
I/O
SMC FDC37C672 Super I/O
Memory
One 168-pin latching DIMM socket, 64/72-bit; Up to 256 MB with 1, 2, 4, 8, 16 or 32M x 64/72, 66/100 MHz Synchronous
Parallel Port
One bi-directional with all IEEE 1284 protocols supported and BIOS selectable IRQs and addressing
Processor
Intel Celeron
Serial Ports
Two RS-232 (16C550) with 16 byte FIFO as COM1-4 with BIOS selectable IRQs and addressing, serial port 2 BIOS configurable RS-422/485
Supply Voltage
Vcc
USB Ports
Two
Features
- 10/100Base-TX Ethernet
- 64-bit AGP CRT and Flat Panel Video with 2 MB SDRAM
- Celeron processor 300A, 366, 433 MHz in PPGA370 Package with 128 KB L2 Cache
- Intel 440BX AGPset with 66/100 MHz FSB
- PC/104-Plus, ISA Passive Backplane or Stand-Alone Operation
- Ultra DMA/33 IDE (Dual) & CompactFlash Disk Support
- Up to 256 MB SDRAM/RSDRAM
Datasheet
VIPER830_d-1465840628s.pdf
76 KiB
Extracted Text
VIPer830 Maximum performance Minimal size The most powerful in the VIPer family, Teknor's high performance VIPer830 SBC combines Intel Celeron™ processor capabilities with full-featured functionality onto a half-size board format to enable use of all slots on standard PICMG compliant passive backplanes. Features include: • Celeron™ processor 300A, 366, 433 MHz in PPGA370 Package with 128 KB L2 Cache • Intel 440BX AGPset with 66/100 MHz FSB • Up to 256 MB SDRAM/RSDRAM • Ultra DMA/33 IDE (Dual) & CompactFlash™ Disk Support • 10/100Base-TX Ethernet High performance • 64-bit AGP CRT and Flat Panel full-featured SBC Video with 2 MB SDRAM • PC/104-Plus, ISA Passive The VIPer830 half-size SBC features a Onboard support for Universal Serial Backplane or Stand-Alone 64-bit Intel Celeron™ processor with Bus (USB) ports, serial/parallel ports, Operation on-die 128 KB L2 pipelined burst cache and a floppy interface is standard. The (full CPU core speed, ECC capable). PC/104-Plus expansion header provides It supports up to 256 MB memory, high access to ISA and PCI bus PC/104 performance PCI Ultra DMA/33 IDE and peripheral modules such as LAN and CompactFlash™. video controllers. It also comes with a 64-bit AGP SVGA The VIPer830 also offers an optional CRT and Flat Panel controller with 2 MB 10Base-T/100Base-TX Ethernet controller. of SDRAM. VIPer830 - Technical Specifications CPU Headers: USB (10-pin shrouded); serial ports (two 10-pin shrouded); ® • Intel Celeron™processor 300A, 366, 433 MHz in PPGA370 Package parallel port (26-pin shrouded); floppy (34-pin shrouded); EIDE (one and higher as technology becomes available 40-pin shrouded); PS/2 mouse (4-pin locking); flat panel display (50-pin • Intel 82440BX AGPset and 20-pin high density shrouded); CompactFlash™ Module header; • 66/100 MHz system/memory bus CPU fan (2-pin locking); PC/104 header (104-pin); PC/104-Plus expansion header (120-pin); external power source (6-pin locking); power-down Bus Interface corrector (2-pin locking); external battery (3-pin locking); AT keyboard, • PC/AT ISA bus or stand-alone operation speaker, and EIDE activity LED (16-pin shrouded) • 100% IBM PC/AT compatible • PC/104-Plus VIPci compatible BIOS • Front Side Bus (66/100 MHz); AGP bus; PCI Bus (33 MHz); ISA Bus • Award Elite BIOS in Boot Block Flash with recovery code; save CMOS (8.33 MHz) in Flash option, and boot from LAN capability • PCI Bus Rev. 2.1 • Auto configuration, extended setup • CC00-E000 address blocking; PnP tables Cache • Setup console redirection to serial port (VT100 mode) with CMOS • 16/16 KB Instruction / Data Level 1 setup access • 128 KB internal 64-bit wide SPB non-blocking ECC Level 2 running at • Software enable/disable of onboard Ethernet full CPU core speed • Diskless, keyboardless, and videoless operation extensions Memory • System, video and LAN BIOS shadowing • One 168-pin latching DIMM socket, 64/72-bit • Programmable bus and I/O speeds, and memory wait states • Up to 256 MB with 1, 2, 4, 8, 16 or 32M x 64/72, 66/100 MHz Synchronous • Advanced security feature for floppy and HDD; DMI and HDD S.M.A.R.T DRAM / Registered SDRAM non ECC / ECC mode (single bit error correc- support tion, double bit detection via Intel 82440BX chip set); all 256 MB cacheable • Advanced Configuration and Power Interface (ACPI 1.0), Advanced Data Path Power Management (APM 1.2), advanced thermal management (resume, • 64-bit on CPU and video memory bus; 32-bit on PCI bus (PC/104-Plus); overheat alarm and auto slow down), and Green support 16-bit on ISA bus Supervisory Interrupts • Two-stage software programmable watchdog timer drives NMI on 1st • 11 edge sensitive and configurable stage, system reset on 2nd stage • 4 PCI level sensitive, configurable to any interrupt vector for PnP • CPU temperature monitor/alarm; power failure/low battery detector compatibility OS Compatibility • All ISA onboard interrupts are PnP compliant ® ® ® • PC and MS-DOS™; Windows 3.X; Windows 95; Windows 98; ® ® DMA Channels (ISA) Windows CE; Windows NT 4.0/5.0; QNX™; LINUX; NOVELL, NETWARE • Four 8-bit, three 16-bit Mechanical • Supports scatter / gather, Fast Type-F DMA • 181 x 122 x 36 mm at CPU / fan (7.125 x 4.80 x 1.40 in. at CPU / fan) Flash Memory • Conforms to IEEE P996 PC/AT bus, PCI Rev. 2.1, & PC/104-Plus • 2 Mb (256 KB) Boot Block for BIOS field upgrade Rev. 1.0 specifications • 4 KB Serial EEPROM for user configuration Power Requirements I/O Supply Voltage Vcc = +5V -5% I/O: SMC FDC37C672 Super I/O CPU: 433 366 300 USB Ports: Two ICC typ.* +5V 4.39A 4.04A 3.69A Serial Ports: Two RS-232 (16C550) with 16 byte FIFO as COM1-4 with ICC Susp.* +5V 1.70A 1.65A 1.64A BIOS selectable IRQs and addressing, serial port 2 BIOS configurable * Measured with 32 MB SDRAM, PCI 10/100Base-TX Ethernet, keyboard, floppy RS-422/485 and hard disk installed. Parallel Port: One bi-directional with all IEEE 1284 protocols supported Environmental and BIOS selectable IRQs and addressing Operating Storage and Transit Floppy Disk: Support for two drives (360 KB to 1.44 MB) Temperature: 0° to 60°C/32° to 140°F -40° to +85°C/-40° to 185°F PCI EIDE: Ultra DMA/33, support for two EIDE drives (master/slave) (w/airflow) configuration; PIO Mode 4, Bus Master IDE or synchronous DMA mode Humidity (RNC): 5% to 95% @ 40°C/104°F 5% to 95% @ 40°/104°F transfers up to 33 MB/s CompactFlash™ Module: Optional bootable non-condensing non-condensing CompactFlash™ module interfaces to secondary IDE channel, user Altitude: 4,572 m / 15,000 ft 15,240 m / 50,000 ft upgradable Ethernet: PCI 10Base-T/100Base-TX (Intel 82559) Shock: 5 G, each axis Video • Integrated Frame Accelerated Graphics Port (AGP) 64-bit CRT/Flat Panel Vibration: 1.5 G, each axis controller with 2 MB 83 MHz SDRAM memory (C&T 69000) Reliability • Supports monochrome & color Plasma, EL, DSTN, SSTN, TFT/CRT • MTBF: >75,000 hours @ 20°C / 68°F (MIL-HDBK-217F) panels with resolution up to 800 x 600, 16.8M colors; 1024 x 768, 64K • USB and mouse / keyboard voltage protected by self-resetting fuses colors; or 1280 x 1024, 256 colors, non-interlaced • Unique silicon serial number accessible via software • Compatible with CGA, EGA, Hercules, MDA, VGA, SVGA, XGA, • 2 year limited warranty and SXGA Designed to meet or exceed: Clock / Calendar Safety: UL 1950; CSA C22.2 No 950; EN 60950; IEC950 • Real-time clock with 256 byte battery backup CMOS RAM EMI/EMC: FCC 47 CFR Part 15/CISPR22; Connectors CE Mark to EN55022 / EN50082 Rear I/O Bracket: CRT (female DB-15 slim); Ethernet (RJ-45 with link/ activity indicators); PS/2 mouse and keyboard (two 6-pin mini-DIN) Teknor Applicom helps customers speed to market with USA CANADA EUROPE applied computing solutions featuring single board computers Tel.: (450) 437-5682 Tel.: (450) 437-5682 Tel.: +49 8165 77-0 and integrated systems specifically designed for Industrial Fax: (450) 437-8053 Fax: (450) 437-8053 Fax: +49 8165 77-219 Automation, Internet, Telecommunications, Mobile Computing and all types of high-speed, high-availability applications. www.teknor.com • 1.800.387.4222 Specifications subject to change without notice. Teknor Applicom Inc. is a Kontron Group Company. Teknor Applicom Inc. and the Teknor ellipse logo are registered trademarks of Teknor Applicom Inc. All other trademarks are the property of their respective owners. Copyright 1999 by Teknor Applicom Inc. All rights reserved. VIPer830.1_11/99
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the VIPER830/566 have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods