KONTRON cPCI-3720
Specifications
Chipset
Intel 440MX Chipset (in EIA Roadmap)
CPU/Cache
Intel BGA2 Low Power Pentium-III with 256KB on-die L2 cache at full-core speed; Intel BGA2 Low Power Celeron with 128KB on-die L2 cache at full-core speed
Form factors
Standard 3U CompactPCI board size: 100 mm x 160 mm; 1-slot (4TE/HP) wide; A slim-type FDD kit support 3-slot (12TE/HP) wide version
Front side bus (FSB) frequency
100MHz
General CompactPCI Features
PICMG 2.0 CompactPCI Rev.3.0 compliant; PICMG 2.1 CompactPCI Hot-swap specification Rev.2.0 com-pliant
Humidity
5% to 95% non-condensed
Operating ambient temperature
0 to 55C
Processor
Intel Celeron
Shock
15G peak-to-peak, 11 ms duration, non-operation
Storage temperature
-20 to 80C
Vibration (non-operating)
1.88Grms, 5~500Hz, each axis
Vibration (operating)
0.5Grms, 5~500Hz, each axis, with 2.5” HDD
Features
- 1-slot width version available for low power applications
- Built-in one USB port, one serial port, integrated PS/2 type keyboard and mouse connector
- Design for Intel Lower Power BGA2 Pentium-III or Celeron
- Dual 10/100Mb Ethernet port by Intel 82559 controller, single Ethernet version is also available for big quantity OEM project
- Internal CompactFlash IDE interface
- Modularize low profile 2.5 inches HDD mechanism for 2-slot version
- Modularize slim-type FDD mechanism for 3-slot version
- One 144-pin SO-DIMM socket supports up to 256MB RAM
- PICMG 2.1 CompactPCI Hot Swap Specification R2.0 Compliant
- Standard 3U form factor
- Support Celeron CPU at 700, 400MHz with 128KB on-die L2 cache
- Support Pentium-III CPU at 850M, 700M Hz with 256KB on-die L2 cache
- Support remote console via the serial port
- Supports 7 bus-master PCI devices on CompactPCI bus
- PICMG 2.0 CompactPCI Specification R3.0 Compliant
Datasheet
Extracted Text
PXI/CompactPCI Platform cPCI-3720 Series 3U CompactPCI Low Power Pentium-III/Celeron CPU Module Features PICMG 2.0 CompactPCI Specification R3.0 Compliant PICMG 2.1 CompactPCI Hot Swap Specification R2.0 Compliant Standard 3U form factor Design for Intel Lower Power BGA2 Pentium-III or Celeron 1-slot width version available for low power applications Support Pentium-III CPU at 850M, 700M Hz with 256KB on-die L2 cache Support Celeron CPU at 700, 400MHz with 128KB on-die L2 cache One 144-pin SO-DIMM socket supports up to 256MB RAM Internal CompactFlash IDE interface Supports 7 bus-master PCI devices on CompactPCI bus Dual 10/100Mb Ethernet port by Intel 82559 controller, single Ethernet version is also available for big quantity OEM project Built-in one USB port, one serial port, integrated PS/2 type keyboard and mouse connector Support remote console via the serial port Modularize low profile 2.5 inches HDD mechanism for 2-slot version Modularize slim-type FDD mechanism for 3-slot version Specifications General CompactPCI Features PICMG 2.0 CompactPCI Rev.3.0 compliant With mezzanine card, provide one CompactFlash socket and 44-pin IDE PICMG 2.1 CompactPCI Hot-swap specification Rev.2.0 com- connectors pliant Support CompactFlash storage disk from 8MB up to 512MB Form factors For 2-slot version, a mechanism supports to built-in 2.5" ATA HDD Standard 3U CompactPCI board size: 100 mm x 160 mm USB Interface cPCI-3720A Series: 1-slot (4TE/HP) wide Two USB ports, USB-A is on front faceplate. USB-B is on the rear I/O cPCI-3720B Series: 2-slot (8TE/HP) wide, with HDD housing only A slim-type FDD kit support 3-slot (12TE/HP) wide version USB Specification Rev. 1.1 compliant CPU/Cache 500 mA over-current protection Intel BGA2 Low Power Pentium-III with 256KB on-die L2 On Board Supper I/O cache at full-core speed Winbond W83977EF Intel BGA2 Low Power Celeron with 128KB on-die L2 cache at One high-speed bi-directional SPP/EPP/ECP parallel port on J2 rear I/O full-core speed One FDD interface, support slim type floppy drive Front side bus (FSB) frequency: 100MHz Two 16C550 UARTs compatible COM ports, COM1 is on rear I/O,COM2 Chipset is designed for using on both front faceplate (via RJ-45 connector) and Intel 440MX Chipset (in EIA Roadmap) rear I/O BIOS One PS2 integrated keyboard and mouse connector Award PnP BIOS with 2Mb (256KB) Flash ROM Watchdog Timer BIOS write protection, provide anti-virus capability Programmable I/O Port 3F0h and 3F1h to configure watchdog timer, which Customized power-on screen (for OEM project) can be programmable to be 1~255 seconds or 1~255 minutes DMI BIOS Support: Desktop Management Interface (DMI) Watchdog timer time out will generate interrupt to NMI or RESET, which allows users to download system hardware-level information is BIOS selectable such as CPU type, CPU speed, internal & external frequencies Bundled easy-programming library for DOS and Windows 98/NT/2000 and memory size Hardware Monitoring Remote console support Winbond W83L784R, monitoring CPU temperature, system temperature Support Intel Preboot Execution Environment (PXE) and DC Voltages Support remote console On-board Ethernet Host Memory Two Ethernet ports: LAN 1 support front I/O. LAN 2 support both front One 144-pin SO-DIMM socket, support maximum 256MB un- and rear I/O. DIP switch selectable buffered SDRAM module Intel 82559 high performance Ethernet controller IDE Ports IEEE 802.3 10Base-T/100Base-TX compatible Bus Master IDE controller: one 44-pin EIDE interface supports IEEE 802.3u auto-negotiation support two IDE devices IEEE 802.3x 100Base-TX flow control support 2A - 16 PXI/CompactPCI Platform PXI/CompactPCI Platform 3U CPU Module PCI Bus Bridge Environment Supports up to 7 PCI bus mastering devices on CompactPCI bus Operating ambient temperature: 0 to 55°C for peripheral slots Storage temperature: -20 to 80°C Flash Disk Supporting Humidity: 5% to 95% non-condensed TM Support Flash2000 (from 32MB to 512MB) flash-storage drive on Shock: 15G peak-to-peak, 11 ms duration, non-operation 2.5" IDE interface Vibration: Support CompactFlash flash-storage drive (from 32MB to 512MB) Non-operation: 1.88Grms, 5~500Hz, each axis Front Panel LEDs and Switch Operation: 0.5Grms, 5~500Hz, each axis, with 2.5” HDD Active LED (Green), HDD LED (Red), WDT LED (Amber), General Safety Certificate and Test Purpose LED (Blue) CE, FCC Flush tact switch for system reset HALT (temperature and vibration stress) Special Feature Support hot-swappable I/O SBC can be hot-swappable when operate under single SBC opera- tion environment (no peripheral) Peripheral Connectivity Front Faceplate On-board Front Board Rear I/O Connector I/O Serial Port (COM1) --- --- J2 Serial Port (COM2) Y (RJ-45) --- J2 Parallel Port --- --- J2 Keyboard & Mouse Y (PS-2) --- J2 Floppy --- Y --- Ultra DMA 33 IDE --- Y --- CompactFlash --- Y (Mezzanine) --- USB A Y(USB) --- --- USB B --- --- J2 10/100Mb Ethernet Port #1 Y (RJ-45) --- --- 10/100Mb Ethernet Port #2 Y (RJ-45) --- J2 LEDs Y --- --- Reset button Y --- --- Ordering Information cPCI-3720 series All models of the cPCI-3720 series are mounted with on-board CPU, 2S1P, USB, CompactFlash Socket. The RAM or HDD are not included. cPCI-3720 / 1: Single Ethernet (OEM only) 2: Dual Ethernet CPU type:P8: Pentium-III 850MHz (OEM only) P7: Pentium-III 700MHz C7: Celeron 700MHz (OEM only) C4: Celeron 400MHz CU: Celeron Ultra Low Power 300MHz (OEM only) A: 1-slot version B: 2-slot version The above table shows many configurations for OEM version. The following table shows the standard models. Please contact ADLINK for the OEM projects. Standard Model Numbers Description / Configuration cPCI-3720A/P72 1-slot version, Low Power Pentium-III 700MHz, dual Ethernet cPCI-3720A/C42 1-slot version, Low Power Celeron 400MHz, dual Ethernet cPCI-3720B/P72 2-slot version, Low Power Pentium-III 700MHz, dual Ethernet cPCI-3720B/C42 2-slot version, Low Power Celeron 400MHz, dual Ethernet cPCI-FDD-3720 The FDD kits for cPCI-3720 2A - 17
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the cPCI-3720 have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Manufacturers




What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods