Cheetah-Cr ® CompactPCI Pentium M Single Board Computer High Performance Pentium M processor, Gigabit Ethernet via PICMG 2.16 FEATURE SET: • Intel Pentium M Processor running Cheetah-Cr shown with heatsink removed, and with CompactFlash card at 1.1 GHz or 1.6 GHz core and hard disk drive installed. frequency and 400 MHz Processor System Bus frequency. • Single slot 6U CompactPCI board. he Momentum Computer Cheetah-Cr is VERSATILE I/O: • Operates in a CompactPCI system Tan Intel Pentium® M processor based slot or non-system slot (auto- • One 64-bit 66/33 MHz PCI/PCI-X CompactPCI Single Board Computer, in a 6U senses). PMC site (IEEE P1386/P1386.1). form factor, operating at 1.1 or 1.6 GHz. • 16-bit 1.066 Gbyte/s Hub 2.0 inter- • Intel 855GME Memory Controller The board incorporates the Intel 855GME face on backplane J5 for high speed Hub with built-in 3D graphics memory controller that supports a 400 MHz rear I/O expansion. engine. processor bus and single channel unbuffered • On-board 2.5" ATA-100 HDD. • Universal Transparent/Non- DDR333 SDRAM with ECC. An Intel 6300ESB • HD-15 VGA interface on the front Transparent PCI-X to PCI-X bridge panel. I/O Controller Hub handles the extensive interfaces to 32-bit or 64-bit • PMC interface with I/O accessible CompactPCI bus operating at I/O capability of the Cheetah-Cr. from the backplane J3 connector. 33 MHz or 66 MHz (PICMG 2.0 Two 10/100/1000Base-T Ethernet ports are R3.0). • 32-bit 33 MHz PCI interface on provided at either a front panel dual RJ45 con- backplane J5 for I/O expansion. • Hot Swappable (PICMG 2.1 R2.0). nector or the backplane J3 connector as PICMG • Two 10/100/1000Base-T Ethernet • Three user LEDs on the front 2.16 nodes. Two IPMB interfaces are also pro- links available either through back- panel. vided on the backplane J1 and J2 connectors plane J3 (PICMG 2.16) or front • Windows® 2000/XP, FreeBSD, for PICMG 2.9 compliance. panel dual RJ45 Connector.† Linux, VxWorks Operating Systems. The board auto-senses and operates as a • Serial ATA150 interface on back- • 0-55°C operating temperature plane J5. CompactPCI system board or non-system (ambient). • Four serial ports: two on backplane board. J5 and two on the front panel The Cheetah-Cr provides a wide range of I/O MEMORY AND STORAGE: through RJ11 cable.† and storage interfaces through front panel and • Two IPMB interfaces on backplane • Up to 2 Gbyte of DDR333 SDRAM backplane J5 connectors. A 64-bit 66/33 MHz J1 and J2 (PICMG 2.9). with ECC at 2.667 Gbyte/s peak PMC site is included for onboard I/O expan- bandwidth. • Three USB 2.0 ports, one on the sion. A 32-bit 33 MHz PCI interface is also front panel, two on the backplane • Type I/II CompactFlash socket included on the backplane J5 connector for J5 connector. accessible from the front panel. rear I/O expansion. There is also a Type I/II † Manufacturing option. For PICMG 2.16 con- • 1 Mbyte Firmware Hub. figuration, the front panel RJ45 connector is CompactFlash® socket on the front panel. • Battery backed Real Time Clock. used as RJ11 cable interface for COM1 and For especially cost sensitive application, the COM2 access. Cheetah-Cr is also available with a 1.30 GHz Intel Celeron® M processor. ���������������� ��� ��������� ������������� �������� ���������������� ������� ���� ������ ���� ����� ������������������ ������������������ ���� ��� ����� ����� ������������� ������ ������������� �������������� ���������������� Cheetah-Cr ® CompactPCI Pentium M Single Board Computer ������������ ������������������� �������������� ���������������������������� �������������������������� �������� �������� �������� ��� ��� ����� ����� ������ ��� ������� ��� ������� ������������ ���������� ������ ������� ���������� ������� ����������� If Cheetah-Cr doesn’t fit your specific requirements: Momentum Computer specializes in quick turn custom development and production of high performance processor boards and I/O boards. Custom designs give you a competitive edge by providing the unique features needed for a leading market position. Custom designs by Momentum Computer are accomplished so rapidly that time-to-market targets can be met with confidence. We’re ready to work for you. Momentum Computer, Inc. 1815 Aston Avenue, Suite 107, Carlsbad, CA 92008-7310 Tel: 760.431.8663 • Fax: 760.431.7571 • e-mail: info@momenco.com www.momentum-computer.com