KONTRON CP6003-SA
Description
Kontron CP6003-SA CPU Board - The CP6003-SA 6U with Intel Core i7 / i5 second generation quad & dual core processors meets the highest computing requirements at lowest power budgets.
Part Number
CP6003-SA
Price
Request Quote
Manufacturer
KONTRON
Lead Time
Request Quote
Category
PRODUCTS - C
Specifications
Altitude
50,000 ft (15,240 m)
Battery Input
1 Rear I/O
Climatic Humidity
93% RH at 40°C, non condensing (acc. to IEC 60068-2-78)
Compliancy
CompactPCI Core Specifi cation PICMG 2.0 Rev. 3.0, CompactPCI Hot Swap Specification PICMG 2.1 R2.0, CompactPCI System Management PICMG 2.9 R1.0, CompactPCI Packet Switching Backplane PICMG 2.16 R1.0, Designed to meet or exceed: Safety: UL 1950, UL 94, CSA 22.2 No 950, EN 60950, IEC 950, EN 55022 / EN 55024, EN 50081-1 / EN 6100-6-2
Dimensions
233 x 160 x 20.5 mm, 6U, 4HP
DVI/HDMI
2 Rear I/O
Ethernet
3 Front I/O, 2 Rear I/O
FAN control
2 Rear I/O
Flash BIOS
Two redundant 8 MByte SPI Flashes
Front Panel Gigabit Ethernet
Three 1000BASE-T Ethernet on the FP
Front Panel LEDs
Eight bicolor (red and green) control and status LEDs, Two IPMI LEDs, One Watchdog and one thermal LED, Four GP LEDs, One blue hot Swap LED
Front Panel Micro Switch
For Hot Swap
Front Panel Reset button
One reset button
Front Panel Serial Port
One RS232 interface on RJ45 connector
Front Panel USB interface
Two USB 2.0 ports, 4-pin standard USB host
Front Panel VGA
One 15-Pin D-Sub connector for analog monitors
HDAudio
1 Rear I/O
IPMI
IPMI 1.5-compliant for IPMI based management and CompactPCI System Management PICMG 2.9 R1.0
MTBF
188089 h acc. MIL-HDBK-217 FN2 Ground Benign 30°, 218585 h acc. Bellcore Issue 6 Ground Benign 30°
NAND Flash
1 Onboard Connector
Up to 32 GB NAND Flash Module option (SSD)
Onboard CPCI Bus
PICMG 2.0 Rev. 3.0 compatible, 64-bit / 66 MHz, Universal V(I/O) 5V or 3.3V signalling, Operating in system slot as system master and in peripheral slot in PCI passive mode (no communication to CompactPCI bus)
Onboard Gigabit Ethernet
Two PICMG 2.16 rear I/O 1000BASE-T ports
Onboard NAND Flash
One port available for mounting an optional NAND Flash module
Onboard PMC/XMC
One 64-bit / 133 MHz PMC slot, Pn1-Pn4, rear I/O Pn3 to J4, 3.3 volt V(I/O), Alternatively one XMC slot via P15, supporting XMC.3 x8 PCIExpress
Onboard SATA
Four ports fixed to rear I/O, One port routed to a standard SATA connector, One port available for mounting an optional 2.5” HDD or SSD
Onboard Serial Ports
COM1 (RS232) routed to front panel and rear I/O, COM2 (RS422) routed to rear I/O only
Operating temp.
0°C to +60°C, passive module heat sink, requires forced airflow cooling, extended with low voltage processor on request
Platform Controller Hub
Intel QM67
PMC / XMC
1/1 Onboard Connector
Power Consumption
Maximum: up to 60 watts (quad core), 50 watts (dual core) or less, depending on CPU type
Processor
Intel Core i7
Intel Core i7/i5 Processor Second Generation (32 nm manufacturing process)
SATA
4 Rear I/O, 2 Onboard Connector
Seria1
1 Front I/O, 2 Rear I/O
SMB
1 Rear I/O Optional
Software Support
AMI EFI (BIOS) with POST codes, setup console redirection to serial port (VT100 mode) with CMOS setup access, BIOS parameters saved in EEPROM, diskless, keyboardless, videoless operation, LAN boot support, Board identification number accessible via EEPROM, Support for Windows 7, XP, XP Embedded, Windows Server 2008R2, Linux (other OSs may be possible, please contact us for information)
Storage temp.
- 55°C to + 85°C (without battery or HDD)
Supervisory Functions, Clock/Calendar
Watchdog, software confi gurable, 125 msec to 256 sec, generates IRQ or hardware reset., Hardware monitor for thermal control, fan speed, and all onboard voltages, RTC battery backup
System Memory
Dual channel DDR3 memory with ECC and data speed of up to 1600 MHz per channel, and up to 16 GB on two SODIMM sockets
TPM
Optional Trusted Platform Module (TPM) 1.2 for enhanced hardware and software based data and system security
USB 2.0
2 Front I/O, 4 Rear I/O
Video CRT VGA
Front I/O
Weight
900g
Features
- 4HP, single slot quad or dual core CPU with passive cooling
- 5x GigEthernet Interfaces via PCIExpress
- Latest IO technology with SATA Gen 3, RAID, SSD
- Rear I/O supporting PICMG 2.16
- Scalable processor speed, Intel Core i7 / i5 up to 2.5 GHz
- Up to 16GB DDR3 1333 MHz memory with ECC via two SO-DIMM sockets
- XMC/PMC + onboard HDD + SSD Flash configuration possible
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the CP6003-SA have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
Kontron Cheetah-Cr 6U Pentium M CompactPCI Single Board Computer. High Performance, Low Power, PICMG...
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods