» CP308 « » CP308 « Intel® Core™2 Duo 3U CompactPCI CPU board » Highest performance based on latest 45nm technology Intel® Core™2 Duo processor up to 2.26 GHz » Latest DDR3 memory technology Providing memory throughput (up to 17 GB/s) » Comprehensive I/O capabilities Gigabit Ethernet, USB, VGA, SATA, RAID, USB NAND Flash … If it’s embedded, it ’s Kontron. CP308 CP308 64-bit processing performance in 45nm package Discover the capabilities of Intel®’s new high Comprehensive System & Management functionality performance 45nm technology, comprising new micro To take over system management tasks the CP308 provides architecture features for greater performance at a a 32bit system management controller(SMC). With this given frequency, up to 50-percent larger L2 caches, and the reading of temperature and voltage values as well as expanded power management capabilities for new levels controlling and supervising of fans is possible. Moreover of energy efficiency. Enhancements in technologies the status of additional in the system installed CompactPCI like Intel® Virtualization, Dynamic Acceleration and cards can be controlled and their status can be read via the SpeedStep® allow further performance gains. IPMB bus. To have a solid base the implemented Firmware is based on the well-established IPMI technology. Equipped with the next generation of high-performance On the system side, the CP308 supports a PCI 32-bit, 33 Core 2 Duo mobile processors manufactured using the 45nm MHz CompactPCI interface enabling the passive mode process and the mobile chipset GS45, the CP308 offers the feature. When installed in a system master slot, the greatest performance ever achieved in the 3U CompactPCI CompactPCI interface will work in transparent mode, form factor. whereas the CompactPCI interface will be isolated when With support for up to 8GB latest DDR3 memory running installed in a peripheral slot. at a memory bus speed of up to 1066 MHz the CP308 can provide a data throughput of up to 17 GB/s. Longterm Availability Investing in a new project is always a challenge and Unique Versatility risky. Extending the lifetime of an application to the The huge range of state-of-the-art interfaces available possible maximum is therefore a critical issue to save the either at the front, as onboard header or via Rear IO allows development investments. the CP308 to be easily adapted to the individual application Delivering a stable product based on Intel®‘s embedded needs. Further on the CP308 is equipped with two high product line the CP308 ensures long term availability. speed expansion connectors, which can be used to directly This eliminates the risk of unplanned design changes and attach one of the two extension boards CP308-HDD or unexpected expensive application modification. While CP308-MEDIA. minimizing deployment risks by providing a broad range of For fast and easy data storage the CP308 can be optionally software support the CP308 eases the process of product equipped with an USB NAND Flash module. integration and maximizes your competitive advantage to meet your time-to-market window. Thanks to the future Highest Data and System Security oriented design the CP308 provides enough headroom for The chipset integrated Trusted Platform Module (iTPM) the emerging next generation applications requirements. provides hardware based encryption mechanisms to create, seal or store keys, passwords and other important data and therefore guarantees data and system security on a high level. 2 www.kontron.com CP308 Technical Information Processor Intel® Core™2 Duo processor in SFF (Small Form Factor) BGA package (45nm manufacturing process): - Core™2 Duo SP9300, 2.26 GHz, 1066 MHz FSB, 6 MB L2 cache - Core™2 Duo SL9400, 1.86 GHz, 1066 MHz FSB, 6 MB L2 cache - Core™2 Duo SU9300, 1.2 GHz, 800 MHz FSB, 3 MB L2 cache All board versions are passive cooled with a heatsink within 4HP height Forced air cooling at a specific flow rate is required depending on the processor version Memory System Memory: Up to 8GByte dual channel DDR3 1066 MHz memory, without ECC, Both channels realized as SODIMM sockets USB Flash: Up to 16GB USB NAND Flash module Flash (uEFI): Two redundant 4 MByte SPI Flashes EEPROM: Serial EEPROM (24LC64) Compact Flash: Onboard CompactFlash mounting within 8HP mezzanine HDD: Onboard 2.5“ SATA HDD mounting within 8HP mezzanine Onboard Controller Intel® GS45 (Small Form Factor) GMCH Graphic Memory Controller Hub: Dual-channel DDR3 memory controller (800/1066 MHz) Internal graphics controller (two engines) or PCIe x16 port I/O Controller Hub: Intel® ICH9M SFF 4 x SATA II ports with RAID functionality (0,1) 8 x USB 2.0, 6 x PCI-Express x1, LPC, SPI, HDA (High Definition Audio) 1x 32-bit/33MHz PCI master interface VGA: Integrated in GS45 max. 2048 x 1536 pixels (QXGA), 16M colors, @75Hz, CRT, max. 384MByte used from system memory Gigabit Ethernet: 2 x GbE Front or Rear (s/w switchable), 82574L PCI-Express controller, WOL (Wake-On-LAN) support LPC Super I/O SMSC SCH3112I-NU with 2x UART and PS/2 Super I/O: Watchdog: Two-stage Watchdog with programmable timeout ranging from 125ms to 4096s in 16 steps FPGA-based, software configurable Trusted Platform Module (TPM): Chipset integrated TPM, Compliant to Trusted Computing Group TPM Specification revision 1.2 NXP LPC2136 32bit controller with on-chip 256 kB Flash and 32 kB RAM, External 512 kbit EEPROM System Management Controller: Front Panel Interfaces VGA: 1 x VGA-CRT 15-pin D-Sub connector USB: 2 x USB 2.0 ports, 4-pin standard USB connectors LEDs: 4 x bicolor control and status LEDs, 1x bicolor SMC LED, 1x Thermal and 1x Watchdog LED Ethernet: 2 x RJ45 with integrated LEDs (ACT, SPEED) Onboard Interfaces USB Flash: 1 x USB port routed to a dedicated onboard connector for mounting an optional USB NAND Flash module 4 x Serial ATA II ports: 2 x ports are fixed to onboard standard SATA connectors, 2 x ports can be switched either to the Serial ATA: I/O extension or to rear I/O I/O Extension Connector (to 8HP): I/O Extension connector holds the following interfaces: 2 x SATA, 3 x USB, 4x PCIe x1 or 1x PCIe x4, HDA, PS/2, COM High Speed Graphics Extension 2 x Display Port (DP), 2x HDMI, SDVO and PCIe x16 graphics port Connector (to 8HP): (the pins are multiplexed and not all interfaces can be used simultaneously) Rear I/O via J2 The Rear I/O versions support: - Two Gigabit Ethernet ports without LED - Two SATA interfaces - Two USB 2.0 ports - Two COM ports (3.3V TTL signalling) - One CRT VGA port - One fan control input - One power management output - Monitor and control signals for fan and power supply PICMG 2.0 Rev. 3.0 compatible, 32-bit/33MHz, version with rear I/O on J2 PICMG 2.0 CompactPCI Bus Interface Universal 5V and 3.3V PCI signalling voltage supported, 7 Req/Gnt & clock lines Operating in system slot as system master and in peripheral slot in PCI passive mode Supervisory Functions Watchdog, software configurable, 125ms to 4096s, generates IRQ or hardware reset. Firmware to read temperatures and onboard voltages, control fan speeds Support for all signals to allow peripheral boards to be hot swapped. The individual clocks for each slot and access to Hot Swap the backplane ENUM# signal comply with the PICMG 2.1 Hot-Swap specification. Compliancy CompactPCI Core Specification PICMG 2.0 Rev. 3.0 CompactPCI Hot Swap Specification PICMG 2.1 R2.0 Designed to meet or exceed: - Safety: UL 60950-1, CSA 22.2 No 60950, EN 60950-1, IEC 60950-1 - EMI/EMC: EN 55022 / EN 55024, EN 61000-6-3 / EN 61000-6-2 General Dimensions: 100 x 160mm, 3U, 4HP Weight: 460g / 4HP MTBF: 219,495 h acc. to MIL-HDBK-217 FN2, Ground Benign GB, controlled at 30° 3 www.kontron.com CP308 Technical Information - AMI uEFI, setup console redirection to serial port (VT100 mode) with CMOS setup access, EFI Shell support, Board Software Support configuration via Shell, diskless, keyboardless, videoless operation - LAN boot support - Board identification number accessible via EEPROM - Support for Windows® XP, Windows® XP Embedded, Windows® Vista, Windows® Server 2003, Windows® Server 2008, Windows® 7, Linux®, VxWorks® (BSP's downloadable from the Internet; other OSs may be possible, please contact us for information) Power Consumption SL9400 LV 1.86 GHz and 2GB memory typ. 18W Environmental 0°C to +60ºC , passive module heat sink, forced system airflow required Operating temp.: -40°C to +85°C with ULV 1.2 GHz CP308-HDD & CP308-MEDIA 4HP Extension Modules for CP308 S/P-DIF CP308 Line Line Mic Out DisplayPort DisplayPort Out In In (Toslink) CP308-MEDIA Front Panel Interfaces Line Out Line In S/P-DIF Out Mic In AD1884A HDAudio Codec Compact Flash Socket 10-pin Test CD In Connector CD In 2.5“ SATA 4-pin Connector HDD/SSD True IDE SDHC Card PCIe COM 1 Socket Device 10-pin Connector 2.5“ SATA Socket SATA to PATA RS232 SD/MMC Bridge Battery Socket mini-PCIe Socket RS232 Flash Media Level Shifter Connector PCIe x1 BAT Serial HD Audio USB SATA DP DP USB SATA High Speed High Speed I/O High Speed Graphic Interconnect Extension Connector Extension Connector (120-pin) (120-pin) CP308 SATA LED USB COM1 USB PS/2 DVI CP308-HDD Reset Button Front Panel Interfaces RS232 RS232 Level Shifter LED/Button DVI Compact Flash Socket 2.5“ SATA HDD/SSD LED Buffer CF USB 2.0 SIL1362A Transmitter 2.5“ SATA Socket SIL3811 SATA to PATA Bridge Battery USB Socket NAND Flash Connector BAT Super I/O LED/Button USB2.0 USB2.0 USB SATA PS/2 SDVO SATA High Speed I/O High Speed Graphic High Speed Interconnect 120-pin Extension 120-pin Extension Connector Connector 4 www.kontron.com CP308 CP308-MEDIA Technical Information Onboard Controller HD Audio AD1884A HD audio codec supporting the following ports: Mic-In stereo port, Line-In stereo port, Line-Out stereo port, S/P-DIF-Out digital port, CD-In stereo port, Internal line-out mono port Front Panel Interfaces 2 x 20-pin DisplayPort connectors, DVI/HDMI capable through passive cable adapter DisplayPort Mic-In 1 x 3.5 mm stereo jack, pink Line-In 1 x 3.5 mm stereo jack, blue Line-Out 1 x 3.5 mm stereo jack, green, with headphone detection S/P-DIF-Out 1 x optical fiber connector (Toslink) Onboard Interfaces 1 x SATA connector for connecting a SATA 2.5” HDD/SSD Serial ATA 1 x CompactFlash card socket, CF Type I and II supported CompactFlash SD/SDHC 1 x SD/SDHC card socket PCI Express Mini Card 1 x PCI Express Mini Card socket, with support for PCIe x1 or USB 2.0 Serial Port 1 x 10-pin connector, RS232 CD-In 1 x 4-pin connector, stereo port Line-Out 1 x 2-pin connector, mono port General Dimensions 100 x 162mm, 4HP (extends CP308 to 8HP) Weight 585 grams (CP308 with CP308-HDD) MTBF 978,674 h acc. to MIL-HDBK-217 FN2, Ground Benign, controlled at 30° Software Support Windows XP, Windows XP embedded, Windows Vista, Windows 7, Linux typ. 1.5W, without peripheral devices connected Power Consumption Environmental Operating temp. 0°C to +60ºC standard, -40°C to +85ºC with special screened version Storage Temp. -55°C to +85ºC 93% RH at 40 °C, non-condensing (acc. to IEC 60068-2-78) Humidity CP308-HDD Technical Information Front Panel Interfaces DVI 1 x 29-pin DVI-D connector USB 2 x USB 2.0 ports, 4-pin standard USB connectors COM 1 x 9-pin D-Sub connector, RS232 signaling PS/2 1 x 6-pin shielded mini-DIN connector for keyboard and mouse Control Reset button and HDD LED Onboard Interfaces USB NAND Flash Up to 16GB USB NAND Flash module Serial ATA 1 x SATA connector for connecting a SATA 2.5” HDD/SSD CompactFlash 1 x CompactFlash card socket, Type I and II supported General 100 x 158mm, 4HP (extends CP308 to 8HP) Dimensions 590 grams (CP308 with CP308-HDD) Weight MTBF 1,230,723 h acc. to MIL-HDBK-217 FN2, Ground Benign, controlled at 30° 5 www.kontron.com CP308 Technical Information Windows XP, Windows XP embedded, Windows Vista, Windows 7, Linux, VxWorks Software Support Power Consumption typ. 1W, without peripheral devices connected Environmental 0°C to +60ºC standard, -40°C to +85ºC with special screened version Operating temp. Storage Temp. -55°C to +85ºC Humidity 93% RH at 40 °C, non-condensing (acc. to IEC 60068-2-78) Ordering Information Article Description Standard Configurations CP308-1.2D-4GD-4HP-R-UF4-E2 1.2GHz Core 2 Duo ULV, 2x 2GB SODIMM DDR3, 4HP, Rear I/O, 4GB USB Flash, extended temp. E2 CP308-1.2D-4GD-4HP-R-UF8-E2-CC 1.2GHz Core 2 Duo ULV, 2x 2GB SODIMM DDR3, 4HP, Rear I/O, 8GB USB Flash, extended temp. E2, with coating CP308-1.2D-4GD-8HP-F-CF4-E2-CC 1.2GHz Core 2 Duo ULV, 2x 2GB SODIMM DDR3, 8HP with CP308-HDD, Front I/O, 4GB CompactFlash, extended temp. E2, with coating CP308-1.2D-4GD-8HP-F-E2 1.2GHz Core 2 Duo ULV, 2x 2GB SODIMM DDR3, 8HP with CP308-HDD, Front I/O, extended temp. E2 CP308-1.2D-8GD-8HP-F-E2 1.2GHz Core 2 Duo ULV, 2x 4GB SODIMM DDR3, 8HP with CP308-HDD, Front I/O, extended temp. E2 CP308-1.86D-4GD-4HP-F 1.86GHz Core 2 Duo, 2x 2GB SODIMM DDR3, 4HP, Front I/O CP308-1.86D-4GD-4HP-R 1.86GHz Core 2 Duo, 2x 2GB SODIMM DDR3, 4HP, Rear I/O CP308-1.86D-4GD-8HP-F 1.86GHz Core 2 Duo, 2x 2GB SODIMM DDR3, 8HP with CP308-HDD, Front I/O CP308-1.86D-4GD-8HP-F-CF2-CC 1.86GHz Core 2 Duo, 2x 2GB SODIMM DDR3, 8HP with CP308-HDD, Front I/O, 2GB CompactFlash, with coating CP308-1.86D-4GD-8HP-R 1.86GHz Core 2 Duo, 2x 2GB SODIMM DDR3, 8HP with CP308-HDD, Rear I/O 2.26GHz Core 2 Duo, 2x 2GB SODIMM DDR3, 4HP, Front I/O CP308-2.26D-4GD-4HP-F 2.26GHz Core 2 Duo, 2x 2GB SODIMM DDR3, 4HP, Rear I/O CP308-2.26D-4GD-4HP-R CP308-2.26D-4GD-4HP-R-UF8 2.26GHz Core 2 Duo, 2x 2GB SODIMM DDR3, 4HP, Rear I/O, 8GB USB Flash CP308-2.26D-4GD-8HP-F 2.26GHz Core 2 Duo, 2x 2GB SODIMM DDR3, 8HP with CP308-HDD, Front I/O CP308-2.26D-4GD-8HP-F-CC 2.26GHz Core 2 Duo, 2x 2GB SODIMM DDR3, 8HP with CP308-HDD, Front I/O, with coating CP308-2.26D-4GD-8HP-F-CF2 2.26GHz Core 2 Duo, 2x 2GB SODIMM DDR3, 8HP with CP308-HDD, Front I/O, 2GB CompactFlash CP308-2.26D-4GD-8HP-F-CF2-HDDXL 2.26GHz Core 2 Duo, 2x 2GB SODIMM DDR3, 8HP with CP308-HDD, Front I/O, 2GB CompactFlash, 2.5" SATA HDD CP308-2.26D-4GD-8HP-R 2.26GHz Core 2 Duo, 2x 2GB SODIMM DDR3, 8HP with CP308-HDD, Rear I/O CP308-2.26D-4GD-8HP-R-HDDXL 2.26GHz Core 2 Duo, 2x 2GB SODIMM DDR3, 8HP with CP308-HDD, Rear I/O, 2.5" SATA HDD 2.26GHz Core 2 Duo, 2x 4GB SODIMM DDR3, 4HP, Rear I/O CP308-2.26D-8GD-4HP-R Rear Transition Modules CP-RIO3-04 4HP rear I/O module (2x Ethernet, 2x USB, VGA, 2x SATA connectors) CP-RIO3-04 8HP rear I/O module (additional to 4HP COM1/2) CP-RIO3-04S 4HP rear I/O module (2x Ethernet, COM, VGA, 2x SATA connectors) 1) Software VXW-BSP-CP308-V6.8 VxWorks 6.8 Board Support Package, CP308 User's Manual 1) Notes: Windows and Linux BSP's only available as download on the web page CORPORATE OFFICES Europe, Middle East & Africa North America Asia Pacific Oskar-von-Miller-Str. 1 14118 Stowe Drive 17 Building,Block #1,ABP. 85386 Eching/Munich Poway, CA 92064-7147 188 Southern West 4th Ring Road Germany USA Beijing 100070, P.R.China Tel.: +49 (0)8165/ 77 777 Tel.: +1 888 294 4558 Tel.: + 86 10 63751188 Fax: +49 (0)8165/ 77 279 Fax: +1 858 677 0898 Fax: + 86 10 83682438 info@kontron.com info@us.kontron.com info@kontron.cn 6 www.kontron.com #CP308# 08122011WAN All data is for information purposes only and not guaranteed for legal purposes. Subject to change without notice. Information in this datasheet has been carefully checked and is believed to be accurate; however, no responsibilty is assumed for inaccurancies. All brand or product names are trademarks or registered trademarks of their respective owners.