» CP3002 « Intel® Core™ i7 / Celeron® 3U CompactPCI board » Outstanding performance Intel® Core™ i7 processor, up to 2.53 GHz » Fast and reliable data storage 8GB DDR3 memory with ECC, SATA NAND Flash module, CFast » Comprehensive I/O capabilities Gigabit Ethernet, USB, SATA, Serial ports ... The pulse of innovation Kontron Datasheet CP3002 Intel® Core™ i7 / Celeron® 3U CompactPCI CPU board Intel®'s Core™ microarchitecture sets new standards for energy- Highest Data Security effi cient performance and scalability by use of new technologies The optional Trusted Platform Module (TPM) such as Intel® Turbo Boost technology and Intel® Smart Cache. provides hardware-based encryption mechanisms to create, seal or store keys, passwords and other important data. The CP3002 is a highly integrated 3U CompactPCI CPU board based on the Intel® Core™ i7 and Celeron® processor platform combined with the Long-Term Availability Mobile Intel® QM57 Express Platform Controller Hub. Investing in a new project is always a challenge and risky. Extending the The CP3002 supports the Intel® Core™ i7-610E and Core™ i7-620LE lifetime of an application to the possible maximum is therefore a critical processors with frequencies up to 2.53 GHz for high-performance needs, issue to save the development investments. as well as the ULV processors Core™ i7-660UE and Celeron® U3405 Delivering a stable product based on Intel®‘s embedded product line, for temperature- and TDP-critical applications. The integrated next the CP3002 ensures long-term availability. This eliminates the risk generation graphics core offers superior 3D and video performance of unplanned design changes and unexpected expensive application resulting in a up to doubled graphics performance compared to previous modifi cation. platform designs. Memory demanding applications can make use of up to While minimizing deployment risks by providing a broad range of 8 GB DDR3 SDRAM with Error Checking and Correction (ECC). For onboard software support, the CP3002 eases the process of product integration data storage the CP3002 offers up to 32 GB on a dedicated SATA Flash and maximizes your competitive advantage to meet your time-to-market module or a HDD/SSD and CFast option on the 8HP extension module. window. On the system side, the CP3002 supports a PCI 32-bit, 33MHz CompactPCI interface enabling the passive mode feature. When installed in a system master slot, the CompactPCI interface is enabled, whereas the CompactPCI interface will be isolated when installed in a peripheral slot. Unique Versatility A variety of communication interfaces like two Gigabit Ethernet ports, six USB 2.0 ports, six SATA interfaces and two serial ports either available at the front as onboard header or via Rear IO allow the CP3002 to be easily adapted to the individual application requirements. CompactPCI Front Panel Connector CP3002 DDR3 w ECC DDR3 w ECC CP3002 Bank A Bank B Rear I/O Eth SODIMM SODIMM GbE 82574L GbE RJ-45 Switch WOL 1066 MHz DDR3 DDR3 Debug GbE 82574L RJ-45 GbE Switch WOL SFF Rear I/O Eth GbE Intel® XDP Core™ i7 Rear I/O Eth BGA USB USB Rear I/O Eth GbE type-A DMI FDI USB PCI 32bit/33 MHz USB PCI x1 PCIe type-A DMI FDI PCI PCIe 3.3V / 5V VIO x1 PCIe USB 2.0 USB 2.0 PCIe 2x USB USB 2x SATA SATA 2x SATA VGA Intel® DSUB VGA VGA 2x USB VGA 15-pin Mux USB 2x USB QM57 DP High-Speed USB 2x SATA 2x USB Power SATA Power GbE A GbE A Extension SATA, PCIe, HDA Connector To Rear I/O LPC SPI SMBus SATA 7-pin SPI SMBus COMA Front Panel LEDs GbE B 2nd 1st GbE B EEP üü TPM (on request) BIOS BIOS BIOS Gen. xBus FLASH FLASH SATA Ext.for Dual SATA Flash Module TPM COMA/B UART POST Code / FPGA Debug / Board VGA Gen. Purpose LPC VGA Control COMA & COMB or GPIO COMA & COMB (LVTTL, 3.3V) Power Management PM Watchdog / Thermal Onboard Power Supplies 3.3V and 5V DC/DC etc. 2 www.kontron.com Kontron Datasheet Technical Information Processor Intel® Core™ i7 and Celeron® processors (32nm technology): » Core i7-620LE: 2.0 GHz, LV, 4MB L3 cache (shared instruction/data cache between both cores) » Core i7-610E: 2.53 GHz, SV, 4MB L3 cache (shared instruction/data cache between both cores) » Core i7-660UE: 1.33 GHz, ULV, 4MB L3 cache (shared instruction/data cache between both cores) » Celeron® U3405: 1.07 GHz, ULV, 2MB L3 cache (shared instruction/data cache between both cores) Please contact Kontron for further information concerning the suitability of other Intel processors for use w. the CP3002 Memory System Memory Up to 8 GB dual channel DDR3 SDRAM running at 1066 MHz, with ECC, via two SODIMM sockets Flash (uEFI) 2x redundant 8 MB SPI Flashes, with fail-over functionality EEPROM Serial EEPROM (24LC64) 64 Kbit for storing uEFI BIOS settings and serial number SATA NAND Flash Up to 32 GB SLC NAND Flash on a dedicated SATA NAND Flash module The SATA NAND Flash option is only available on a 4HP CP3002 HDD Onboard 2.5" SATA HDD installation via 8HP mezzanine CFast Onboard CFast installation via 8HP mezzanine Onboard Controller Platform Controller Hub Mobile Intel® QM57 Express Chipset: » SATA host controller with six ports with RAID 0/1/5/10 support » USB 2.0 host interface with up to 14 ports (six ports are used on the CP3002) » Two PCI Express x4 or eight PCI Express x1 2.0 ports (only two PCI Express x1 are used) VGA High performance 3D graphics controller integrated in the processor: » Support for two independent displays » Supports digital display resolutions up to 2560 x 1600 pixels @ 60Hz » Supports analog display resolutions up to 2048 x 1536 pixels @ 75Hz » Dynamic Video Memory Technology (DVMT), up to 352 MB Gigabit Ethernet 2x GbE, front or rear (switchable), Intel 82574L Ethernet controller, WOL (Wake-On-LAN) support UART XR16L2750IM-F, dual UART, 16C550-compatible Watchdog FPGA-based, timeout ranging from 125ms to 4096s programmable in 16 steps, IRQ, Reset, dual-stage RTC Integrated in QM57 with 256 Byte CMOS RAM Trusted Platform Module (TPM) Infi neon SLB9635TT TPM 1.2 controller, optional Front Interfaces 4HP VGA 1x VGA-CRT 15-pin D-Sub connector USB 2x USB 2.0 ports, 4-pin standard USB connectors Ethernet 2x RJ45 with integrated LEDs (ACT, SPEED) LED´s 6x LED’s: 4x POST Code or General Purpose, WD, TH Front Interfaces 8HP (additional to 4HP) DVI 1x 29-pin DVI-D connector USB 2x USB 2.0 ports, 4-pin standard USB connectors COM 1x 9-pin D-Sub connector, RS-232 signalling Control Reset button and HDD LED Onboard Interfaces Serial ATA 1x onboard standard SATA connector High-Speed I/O Connector The high-speed I/O connector to the extension module holds the following signals: » PCI Express » Two SATA II » Two USB 2.0 » One DisplayPort » One COM port RS-232 » HDA » LPC I/O Extension Connector 18-pin I/O extension connector holding 1x SATA port for the SATA NAND Flash module The CP3002 supports: Rear I/O via J2 » Two SATA II ports » Two Gigabit Ethernet ports without LED signals » Two USB 2.0 ports » One VGA analog port » Two COM ports (LVTTL signal level) » Five GPIs and Three GPOs (LVTTL signal level) » Power management signals 3 www.kontron.com Kontron Datasheet Technical Information (continued) » PICMG 2.0 Rev. 3.0 compatible, 32-bit/33MHz, version with rear I/O via J2 CompactPCI Bus Interface » Universal 5V and 3.3V PCI signalling voltage supported, 7 Req/Gnt & clock lines » Operating in system slot as system master and in peripheral slot in PCI passive mode Supervisory Functions Watchdog, software confi gurable, 125ms to 4096s in 16 steps, generates IRQ or hardware reset, dual-stage confi guration Hot Swap Support for all signals to allow peripheral boards to be hot swapped. The individual clocks for each slot and access the backplane ENUM# signal comply with the PICMG 2.1 Hot Swap Specifi cation Compliancy » CompactPCI Core Specifi cation PICMG 2.0 Rev. 3.0 » CompactPCI Hot Swap Specifi cation PICMG 2.1 Rev. 2.0 Designed to meet or exceed: » Safety: UL 60950-1, CSA 22.2 No 60950, EN 60950-1, IEC 60950-1 » EMI/EMC: EN 55022 / EN 55024, EN 61000-6-3 / EN 61000-6-2 General Dimensions 100 x 160mm, 3U, 4HP or 8HP Weight CP3002 4HP: 340 g CP3002 8HP: 480 g MTBF CP3002: 250,129 h acc. to MIL-HDBK-217 FN2, Ground Benign, controlled at 30° CP3002-HDD: 1,901,991 h acc. to MIL-HDBK-217 FN2, Ground Benign, controlled at 30° » AMI uEFI, setup console redirection to serial port (VT100 mode) with CMOS setup access, EFI Shell support, Board Software Support confi guration via Shell, diskless, keyboardless, videoless operation » LAN boot support » Board identifi cation number accessible via EEPROM » Support for Windows® XP, Windows® 7, Windows® Embedded Standard 7, Windows® Server 2003, Windows® Server 2008, Linux®, Wind River Linux, VxWorks®, QNX® (Other OSs may also be used with the CP3002. Please contact Kontron for further information.) Power Consumption Core i7-620LE 2.0 GHz and 4GB memory typ. 28W Environmental Operating Temp. 0°C to 60ºC, standard, extended temp. -25°C to 70°C on project request Storage Temp. -40°C to +85ºC (without additional components) Climatic Humidity 93% RH at 40°C, non-condensing (acc. to IEC 60068-2-7) 4 4 w ww ww w.k .kont ontr ron.com on.com Kontron Datasheet Ordering Information Article Description CP3002-SA-2.0D-4-8F Core i7-620LE, 2.0 GHz, 4MB L3, 4GB DDR3 with ECC, 8HP with CP3002-HDD, Front I/O CP3002-SA-2.0D-4-8F-C Core i7-620LE, 2.0 GHz, 4MB L3, 4GB DDR3 with ECC, 8HP with CP3002-HDD, Front I/O, with conformal coating Core i7-620LE, 2.0 GHz, 4MB L3, 4GB DDR3 with ECC, 8HP with CP3002-HDD, Front I/O, with SATA Flash 8GB CP3002-SA-2.0D-4-8F-S8 CP3002-SA-2.0D-4-8R Core i7-620LE, 2.0 GHz, 4MB L3, 4GB DDR3 with ECC, 8HP with CP3002-HDD, Rear I/O Core i7-620LE, 2.0 GHz, 4MB L3, 4GB DDR3 with ECC, 8HP with CP3002-HDD, Rear I/O, extended temp. range CP3002-SA-2.0D-4-8R-EX CP3002-SA-2.0D-4-8R-EX-C Core i7-620LE, 2.0 GHz, 4MB L3, 4GB DDR3 with ECC, 8HP with CP3002-HDD, Rear I/O, extended temp. range, with conformal coating CP3002-SA-2.0D-8-4F Core i7-620LE, 2.0 GHz, 4MB L3, 8GB DDR3 with ECC, 4HP, Front I/O Core i7-620LE, 2.0 GHz, 4MB L3, 8GB DDR3 with ECC, 8HP with CP3002-HDD, Rear I/O CP3002-SA-2.0D-8-8R CP3002-SA-2.0D-8-8R-EX-C Core i7-620LE, 2.0 GHz, 4MB L3, 8GB DDR3 with ECC, 8HP with CP3002-HDD, Rear I/O, extended temp. range, with conformal coating CP3002-SA-2.53D-4-4F Core i7-610E, 2.53 GHz, 4MB L3, 4GB DDR3 with ECC, 4HP, Front I/O Core i7-610E, 2.53 GHz, 4MB L3, 4GB DDR3 with ECC, 4HP, Front I/O, with SATA Flash 16GB CP3002-SA-2.53D-4-4F-S16 CP3002-SA-2.53D-4-8F Core i7-610E, 2.53 GHz, 4MB L3, 4GB DDR3 with ECC, 8HP with CP3002-HDD, Front I/O Core i7-610E, 2.53 GHz, 4MB L3, 4GB DDR3 with ECC, 4HP, Rear I/O CP3002-SA-2.53D-4-4R CP3002-SA-2.53D-4-4R-S16 Core i7-610E, 2.53 GHz, 4MB L3, 4GB DDR3 with ECC, 4HP, Rear I/O, with SATA Flash 16GB CP3002-SA-2.53D-4-8R Core i7-610E, 2.53 GHz, 4MB L3, 4GB DDR3 with ECC, 8HP with CP3002-HDD, Rear I/O CP3002-SA-2.53D-8-8F Core i7-610E, 2.53 GHz, 4MB L3, 8GB DDR3 with ECC, 8HP, Front I/O CP3002-SA-2.53D-8-8F-C Core i7-610E, 2.53 GHz, 4MB L3, 8GB DDR3 with ECC, 8HP with CP3002-HDD, Front I/O, with conformal coating Core i7-610E, 2.53 GHz, 4MB L3, 8GB DDR3 with ECC, 8HP with CP3002-HDD, Front I/O, with HDD King Size CP3002-SA-2.53D-8-8F-HK CP3002-SA-2.53D-8-4R-S8 Core i7-610E, 2.53 GHz, 4MB L3, 8GB DDR3 with ECC, 4HP, Rear I/O, with SATA Flash 8GB Core i7-610E, 2.53 GHz, 4MB L3, 8GB DDR3 with ECC, 8HP with CP3002-HDD, Rear I/O CP3002-SA-2.53D-8-8R Flash Storage (as separate item, not mounted on the CPU) FLASH-SATA-xGB-CP3002/ SATA NAND Flash module, various sizes available CP3003 CFASTx Industrial grade CFast, various sizes available Rear Transition Module CP-RIO3-04 4HP rear I/O module (2x Ethernet, 2x USB, VGA, 2x SATA connectors) CP-RIO3-04 8HP rear I/O module (additional to 4HP COM1/2) 4HP rear I/O module (2x Ethernet, COM, VGA, 2x SATA connectors) CP-RIO3-04S Software VxWorks 6.9.1 Board Support Package VXW-BSP-CP3002 (-RC/-RA)-V6.9.1 Please contact your local sales representative for other confi guration options. 5 5 w ww ww w.k .kont ontr ron.com on.com Kontron Datasheet CORPORATE OFFICES Europe, Middle East & Africa North America Asia Pacifi c Oskar-von-Miller-Str. 1 14118 Stowe Drive 17 Building,Block #1, ABP. 85386 Eching / Munich Poway, CA 92064-7147 188 Southern West 4th Ring Road Germany USA Beijing 100070, P.R.China Tel.: + 49 8165 77 777 Tel.: + 1 888 294 4558 Tel.: + 86 10 63751188 Fax: + 49 8165 77 219 Fax: + 1 858 677 0898 Fax: + 86 10 83682438 info@kontron.com info@us.kontron.com info@kontron.cn 6 www.kontron.com Datasheet – CP3002 #11222012WMH All data is for information purposes only and not guaranteed for legal purposes. Subject to change without notice. Information in this datasheet has been carefully checked and is believed to be accurate; however, no responsibilty is assumed for inaccurancies. All brand or product names are trademarks or registered trademarks of their respective owners.