R A dvanced TCA AT8902 AdvancedTCA Base/Fabric Hub board with dual AdvancedMC support AdvancedTCA / AdvancedMC Open Modular Solutions PICMG 3.0/3.1-compliant base  Versatile Base and Fabric AdvancedTCA Switch interface (GbE) switch The Kontron AT8902 is an AdvancedTCA Base and Fabric Switch board that Non-blocking layer 2 / 3  is PICMG 3.0/3.1 compliant. Built to support two Mid-Size or two Full-Size switching /routing AdvancedMC modules, the AT8902 is the ideal high-end switch platform that provides maximum design flexibility for a wide range of wireless and wireline Advanced Level 3, IPv4 & IPv6  network applications, and employs leading-edge switching technology for full Options for QoS support and wire-speed throughput during all load conditions for any network topology.  Jumbo Packet line rate switching Full Redundancy and High Availability Suitable for dual-star and full-mesh configurations in 14- and 16-slot systems, 4x GbE x Base/Fabric uplinks on  the AT8902 is hot swappable, supports full redundancy, Layer 2 / 3 protocols front panel (option for Layer 4), and provides 2x 10 Gigabit Ethernet uplink options via 2 Mid-Size or Full-Size  one AdvancedMC slot. AdvancedMC module slots for AdvancedMC-Everywhere integration for customization customization With the support for two AdvancedMC modules, the AT8902 supports an assortment of AdvancedMC modules, such as for processing, mass storage, and 2 x 10 GbE connections to one  I/O GbE inter-links to enable multi-shelf AdvancedTCA systems. AdvancedMC slot IPMI Support Supports 14- and 16-slot  The AT8902 supports the Intelligent Platform Management Interface AdvancedTCA shelves Specification (IPMI) 1.5 to manage power, cooling and interconnect needs of IPMI v1.5 support intelligent devices, as well as to monitor events and to log events to a central  repository. If it´s Embedded, it´s Kontron. AT8902 Technical Information Processor and Memory Board Management Ethernet - IBM PowerPC® 405 32-bit RISC processor core operating up to - Based on IPMI 1.5 400MHz with 16KB I- and D-caches - FRU Management - PC-133 synchronus DRAM (SDRAM) interface - Sensors (Voltage, Current, Temperature, Fuse) - 40-bit interface serves 32 bits of data plus 8 check bits for ECC - Status and Alerting applications - Hot Swap - Electronic Keying of Base and Fabric Interfaces Ethernet - Broadcom fifth generation of StrataSwitch/StrataXGS product line Management and Protocols - 24 10/100/1000 Mbps Ethernet ports - Management via SNMP, TELNET, CLI - Line-rate switching for all packet sizes and conditions - In-band - On-chip data packet memory and table memory - Out of band via Ethernet or RS232 - Advanced Fast Filter Processor (FFP) ContentAware classification - IPMI version 1.5 - Advanced security features in hardware - Ethernet/Bridging protocols include - Port-trunking and mirroring supported across stack - Link aggregation (802.3ad) - Advanced packet flow control: - VLANs (802.1Q) - Head-of-line-blocking prevention - Spanning tree (802.1D, 802.1w) - Back pressure support - Flow control (802.3x) - Standard compliant 802.1ad provider bridging - GVRP, GMRP - IEEE 1149.1 (JTAG) boundary scan Physical & Mec hanical - Size: Single slot ATCA board Base Interface (PICMG 3.0) - Power: 50W typical without AMCs - Non-blocking layer 2 / 3 switching/routing - 8U form factor mechanically compliant to PICMG 3.0 and 3.1 Fabric Interface (PICMG 3.1) - 2 Mid-Size / Full-Size AMC Slots - Non-blocking layer 2 / 3 switching/routing with VLANs - 280 mm x 322 mm (11.024“ x 12.677“) - Dual GbE services to redundant Hub Board - 1,8 kg - Dual GbE services to payload slots 2-5 General Compliances - GbE service to payload slots 6-15 The AT8901 conforms to the following specifications: Project Customization with AdvancedMC Slots - Mid-Size / Full-Size - PICMG 3.0 AdvancedTCA Base Specification, Revision 2.0 - Dual 10GbE connection to one AMC slot - PICMG 3.1 Ethernet/Fibre Channel for AdvancedTCA Systems, - Processor-AMC Revision 1.0 - Storage-AMC - AMC.0 AMC Base Specification - I/O - AMC - AMC.1 PCI-Express and Advanced Switching on AMC - D0.96 of AMC.2 Revision 1.0 Gigabit Ethernet Interfaces on front panel - D0.9d of AMC.3 Revision 1.0 Storage - 4 X 10/100/1000Base-T Uplinks for Base Interface (B1-B4) - IPMI v1.5 Intelligent Platform Management Interface Specification - 4 X 10/100/1000Base-T Uplinks for Fabric Interface (F1-F4) - 1 X 10/100Base-T Management Environmental Operating Storage and Transit - 1 X RS232 Management -40 to +70°C / -10 to - 8 RTM Channels from each AMC Slot 0 °C to 55 °C Temperature*: 158°F* - Storage interface for HDD or Flash mass storage (SAS/SATA/FC) 15%-90% (non-conden- 15%-90% (non-conden- from each AMC Slot Humidity*: sing) at 55°C (131°F) sing) at 55°C (131°F) Interfaces to ATCA backplane 4000 m (13,123 ft) - Zone 2 connectors Altitude*: 15,000m / 49,212 ft - Fabric channels 1-5: 2 x GbE (1000Base-BX) 30G/11 ms half sine 50G, 170 inches/second Shock*: - Fabric channels 6-15: 1 x GbE (1000Base-BX) trapezoidal - Base channel 1 x Ethernet to ShMC(s) (10/100Base-T)* 5 to 100Hz: 1G @ 0.25 5 to 50Hz: 0.5G @ 0.1 Vibration*: - Base channels 2-16: 1 x GbE (1000Base-T) Octave/minute Octave/minute - CLK 1/2/3 A/B *Meet or exceed - Update Channels: 4 x GbE (1000Base-BX) - Zone 1 connector Targeted MTBF is 150,000h @ 30°C, calculations based on Bellcore/ - Power Telcordia SR-332 Issue 1 - IPMB A - IPMB B * Although the Ethernet controller supports 1 Gb/s, the ShMC is set to 10/100Base-T. Corporate Offices US/ Canada Asia Pacific Europe, Middle East & Africa 14118 Stowe Dr Far East Science Park, 2nd Floor No.2, Lane50, Oskar-von-Miller-Straße 1 85386 Eching/Munich - Germany Poway, CA 92064-7147 Nan Kang Road Section 3 Nan Kang District Taipei, Taiwan Tel.: +49 (0)8165 77 0 Tel.: (858) 677-0877 Tel: +886 2 2782 0201 Fax: (858) 677-0898 Fax: +886 2 2782 7486 Fax: +49 (0)8165 77 279 sales@us.kontron.com sales@kontron.com.tw sales@kontron.com www.kontron.com AT8902 - Doc V 2.1 - 2007 All data is for information purposes only and not guaranteed for legal purposes. Subject to change without notice. Information in this datasheet has been carefully checked and is believed to be accurate; however, no responsibilty is assumed for inaccurancies. All brand or product names are trademarks or registered trademarks of their respective owners.