Manufacturers
KONTRON AT8901
Description
Kontron AT8901 Hub - The Kontron AT8901 is an AdvancedTCA Base Hub board that is PICMG 3.0 and 3.1 compliant & built to support two Mid-Size or Full-Size AdvancedMC modules.
Part Number
AT8901
Price
Request Quote
Manufacturer
KONTRON
Lead Time
Request Quote
Category
ADVANCEDTCA / ADVANCEDMC » HUB/SWITCH BOARDS
Specifications
Altitude (Meet or Exceed)
Operating:4,000 m (13,123 ft); Storage and Transit:15,000m / 49,212 ft
Base Interface (PICMG 3.0)
Non-blocking layer 2 / 3 switching; 1 x GbE connection to one AMC slot
Board Management
Based on IPMI 1.5; FRU Management; Sensors (Voltage, Current, Temperature, Fuse); Status and Alerting; Hot Swap; Electronic Keying of Base Interfaces
Ethernet
Broadcom fifth generation of StrataSwitch/StrataXGS product line; 24 10/100/1000 Mbps Ethernet ports; Line-rate switching for all packet sizes and conditions; On-chip data packet memory and table memory; Advanced Fast Filter Processor (FFP) ContentAware classification; Advanced security features in hardware; Port-trunking and mirroring supported across stack; Advanced packet flow control:; Head-of-line-blocking prevention; Back pressure support; Standard compliant 802.1ad provider bridging; IEEE 1149.1 (JTAG) boundary scan
General Compliances
The AT8901 conforms to the following specifications:PICMG 3.0 AdvancedTCA Base Specification, Revision 2.0, and 3.1, AMC.0 AMC Base Specification, D0.96 of AMC.2 Revision 1.0 Gigabit Ethernet, D0.9d of AMC.3 Revision 1.0 Storage, IPMI v1.5 Intelligent Platform Management Interface Specification
Humidity (Meet or Exceed)
Operating:15%-90% (non-condensing) at 55°C (131°F); Storage and Transit: 15%-90% (non-condensing) at 55°C (131°F)
Interfaces on front panel
4 X 10/100/1000Base-T Uplinks for Base Interface (B1-B4); 1 X 10/100Base-T Management; 1 X RS232 Management; 8 RTM Channels from each AMC Slot; Storage interface for HDD or Flash mass storage (SAS/SATA/FC) from each AMC Slot
Interfaces to ATCA Backplane
Zone 2 connectors; Base channel 1: 1/2 x Ethernet to ShMC(s) (10/100/1000Base-T); Base channels 2-16: 1 x GbE (1000Base-T); CLK 1/2/3 A/B; Update Channels: 4 x GbE (1000Base-BX); Zone 1 connector; Power; IPMB A; IPMB B
Management & Protocols
Management via SNMP, TELNET, CLI, In-band & Out of band via Ethernet or RS232; IPMI version 1.5; Ethernet/Bridging protocols include:Link aggregation (802.3ad), VLANs (802.1Q), Spanning tree (802.1D, 802.1w), Flow control (802.3x), GVRP, GMRP
Mechanical
8U form factor mechanically compliant to PICMG 3.0 and 3.1; 2 Full-Size or Mid-Size AMC Slots; 280 mm x 322 mm (11.024“ x 12.677“); 1,8 kg
MTBF
Targeted MTBF is 150,000h @ 30°C, calculations based on Bellcore/Telcordia SR-332 Issue 1
Physical & Environmental
Size: Single slot ATCA board; Power: 50W typical without AMCs
Processor & Memory
IBM PowerPC 405 32-bit RISC processor core operating up to 400MHz with 16KB I- and D-caches; PC-133 synchronus DRAM (SDRAM) interface; 40-bit interface serves 32 bits of data plus 8 check bits for ECC applications
Project Customization w/ AdvancedMC Slots - Mid-size/Full-size
Processor-AMC; Storage-AMC; I/O - AMC
Shock (Meet or Exceed)
Operating:30G/11 ms half sine; Storage and Transit:50G, 170 inches/second trapezoidal
Temperature (Meet or Exceed)
Operating:0 °C to 55 °C; Storage and Transit: -40 to +70°C / -10 to 158°F
Vibration (Meet or Exceed)
Operating:5 to 100Hz: 1G @ 0.25 Octave/minute; Storage and Transit:5 to 50Hz: 0.5G @ 0.1 Octave/minute
Features
- 4x GbE uplinks on front panel
- Advanced Level 3, IPv4 & IPv6
- GbE connections to AdvancedMC slots
- IPMI v1.5 support
- Non-blocking layer 2 / 3 switching /routing
- Options for QoS support and Jumbo Packet line rate switching
- PICMG 3.0 and 3.1-compliant base interface (GbE) switch
- Supports 14- and 16-slot AdvancedTCA shelves
- Two Mid-Size OR Full-size AdvancedMC slots for customisation
Datasheet
Extracted Text
R A dvanced TCA AT8901 AdvancedTCA Base Hub board with dual AdvancedMC support AdvancedTCA / AdvancedMC Open Modular Solutions (OMS) Highly Flexible Entry-level Base Hub PICMG 3.0 and 3.1-compliant The Kontron AT8901 is an AdvancedTCA Base Hub board that is PICMG 3.0 and base interface (GbE) switch 3.1 compliant. Built to support two Mid-Size or Full-Size AdvancedMC modules, the AT8901 is the ideal entry-level hub platform that provides Non-blocking layer 2 / 3 maximum design flexibility. switching /routing Full Redundancy and High Availability Advanced Level 3, IPv4 & IPv6 Suitable for dual-star configurations in 14- and 16-slot systems, the AT8901 is hot swappable, supports full redundancy, Layer 2 / 3 protocols (option for Options for QoS support and Layer 4), and provides flexible Gigabit Ethernet uplink options via front panel Jumbo Packet line rate switching and RTM. AdvancedMC-Everywhere integration for customization 4x GbE uplinks on front panel With the support for two AdvancedMC modules, the AT8901 enables cost- Two Mid-Size OR Full-size optimised customization for a wide assortment of application requirements. AdvancedMC slots for The AT8901 may be enhanced by various AdvancedMC modules, such as processing (acting as the system controller which saves one AdvancedTCA customisation slot); HDD as mass storage device; and I/O GbE inter-link to enable multi-shelf AdvancedTCA systems. GbE connections to AdvancedMC slots IPMI Support The AT8901 switch board supports an intelligent hardware management Supports 14- and 16-slot system, based on the Intelligent Platform Management Interface Specification AdvancedTCA shelves (IPMI) 1.5. The hardware management system provides the ability to manage the power, cooling and interconnect needs of intelligent devices, to monitor IPMI v1.5 support events and to log events to a central repository. If it's embedded, it's Kontron. AT8901 Technical Information Processor and Memory Management and Protocols Ethernet AT8901 - IBM PowerPC® 405 32-bit RISC processor core operating up to - Management via SNMP, TELNET, CLI 400MHz with 16KB I- and D-caches - In-band - PC-133 synchronus DRAM (SDRAM) interface - Out of band via Ethernet or RS232 - 40-bit interface serves 32 bits of data plus 8 check bits for ECC - IPMI version 1.5 AdvancedTCA Base Hub board applications - Ethernet/Bridging protocols include - Link aggregation (802.3ad) Ethernet - VLANs (802.1Q) - Broadcom fifth generation of StrataSwitch/StrataXGS product line with dual AdvancedMC support - Spanning tree (802.1D, 802.1w) - 24 10/100/1000 Mbps Ethernet ports - Flow control (802.3x) - Line-rate switching for all packet sizes and conditions - GVRP, GMRP - On-chip data packet memory and table memory Physical & Environmental - Advanced Fast Filter Processor (FFP) ContentAware classification - Advanced security features in hardware - Size: Single slot ATCA board - Port-trunking and mirroring supported across stack - Power: 50W typical without AMCs - Advanced packet flow control: Mechanical - Head-of-line-blocking prevention - 8U form factor mechanically compliant to PICMG 3.0 and 3.1 - Back pressure support - 2 Full-Size or Mid-Size AMC Slots - Standard compliant 802.1ad provider bridging - 280 mm x 322 mm (11.024“ x 12.677“) - IEEE 1149.1 (JTAG) boundary scan - 1,8 kg Base Interface (PICMG 3.0) General Compliances - Non-blocking layer 2 / 3 switching The AT8901 conforms to the following specifications: - 1 x GbE connection to one AMC slot - PICMG 3.0 AdvancedTCA Base Specification, Revision 2.0, and 3.1 Project Customization with AdvancedMC Slots - Mid-Size / Full-Size - AMC.0 AMC Base Specification - Processor-AMC - D0.96 of AMC.2 Revision 1.0 Gigabit Ethernet - Storage-AMC - D0.9d of AMC.3 Revision 1.0 Storage - I/O - AMC - IPMI v1.5 Intelligent Platform Management Interface Specification Interfaces on front panel Environmental - 4 X 10/100/1000Base-T Uplinks for Base Interface (B1-B4) Operating Storage and Transit - 1 X 10/100Base-T Management -40 to +70°C / -10 to 0 °C to 55 °C Temperature*: - 1 X RS232 Management 158°F* - 8 RTM Channels from each AMC Slot 15%-90% (non-conden- 15%-90% (non-conden- Humidity*: - Storage interface for HDD or Flash mass storage (SAS/SATA/FC) sing) at 55°C (131°F) sing) at 55°C (131°F) from each AMC Slot 4000 m (13,123 ft) Altitude*: 15,000m / 49,212 ft Interfaces to ATCA backplane - Zone 2 connectors 30G/11 ms half sine 50G, 170 inches/second Shock*: - Base channel 1: 1/2 x Ethernet to ShMC(s) (10/100/1000Base-T) trapezoidal - Base channels 2-16: 1 x GbE (1000Base-T) 5 to 100Hz: 1G @ 0.25 5 to 50Hz: 0.5G @ 0.1 Vibration*: Octave/minute Octave/minute - CLK 1/2/3 A/B *Meet or exceed - Update Channels: 4 x GbE (1000Base-BX) - Zone 1 connector Targeted MTBF is 150,000h @ 30°C, calculations based on Bellcore/ - Power Telcordia SR-332 Issue 1 - IPMB A - IPMB B Board Management - Based on IPMI 1.5 - FRU Management - Sensors (Voltage, Current, Temperature, Fuse) - Status and Alerting - Hot Swap - Electronic Keying of Base Interfaces Corporate Offices Europe, Middle East & Africa North America Asia Pacific Kontron AG Kontron America 4F, No. 415, Ti-Ding Blvd., Oskar-von-Miller-Straße 1 Sec.2, NeiHu District 14118 Stowe Dr 85386 Eching/Munich - Germany Taipei, Taiwan 114 Poway, CA 92064-7147 Tel.: +49 (0)8165 77 0 Tel.: (858) 677-0877 Tel. +886-2-2799-2789 Fax: +49 (0)8165 77 279 Fax: (858) 677-0898 Fax +886-2-2799-7399 sales@kontron.com sales@us.kontron.com sales@kontron.com.tw www.kontron.com #AT8901#24_08_2007 All data is for information purposes only and not guaranteed for legal purposes. Subject to change without notice. Information in this datasheet has been carefully checked and is believed to be accurate; however, no responsibilty is assumed for inaccurancies. Kontron and the Kontron logo are registered trademarks of Kontron AG. All brand or product names are trademarks or registered trade- marks of their respective owners. RoHS compliant logo means that product will be lead-free/RoHS compliant latest by June 30th, 2006. ISO 9001:2000 Quality System Registered
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the AT8901 have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods