AT8030  ® ® Triple Intel Core 2 Duo plus 10GbE fabric and AdvancedMC support ® ® AdvancedTCA / AdvancedMC Triple Intel Core 2 Duo  Dedicated SDRAM memory Open Modular Solutions  per CPU core An ideal processor node for IMS clustering applications, the 10 GbE on the fabric Kontron AT8030 AdvancedTCA processor board is designed with  three Intel® Core 2 Duo ® processors each with dedicated 1 X Mid-Size AdvancedMC bay  memory, plus 10 GbE on the fabric and one AdvancedMC slot. PCI Express x4 and dual GbE  The Kontron AT8030 is one of three key open modular platform connectivity elements that complete Kontron’s 10 GbE product portfolio. The Optional 2.5-inch SATA or SAS  Kontron AT8030 provides equipment manufacturers the flexibility HDD via AMC or RTM to customize the design of their network system solutions, especially for various 10 GbE-based systems that drive IMS-based Onboard XAUI/Gigabit  broadband applications that require the seamless delivery of Ethernet switch video and data content in IPTV or VoD networks. Onboard Flash Disk with up to  4 GB dedicated for each CPU For further customization, the AT8030 is available with the RTM8030, a SAS-1.1 Revision 10-compliant rear transition module Full IPMI support and remote  (RTM) incorporating 1x onboard SAS HDD and IPMI support. management of each CPU engines via any IPMI channels If it’s Embedded, it’s Kontron AT8030 Technical Information  Processors BIOS - 3x Intel Core 2 Duo L7400 LV Processor (3 separate engines) - AMI BIOS - Core frequency >1.5GHz - Warm reset support with memory protection for post-mortem analysis - Automatic Thermal Management Intelligence for CPU 0/1/2 - Save CMOS in SEEPROM option Cache Memory - Boot from gigabit Ethernet (CPU 1/CPU2 Base and Fabric interfaces and management Lan) - 4 MB of L2 cache dedicated for each core. - Boot from SAS Chipset - Boot from USB 2.0 (Floppy, CD-ROM, Hard Disk) - Intel® 3100 MCH - Auto configuration and extended setup Bus interface - Diskless, Keyboard less, and battery less operation extensions - CPUs Front Side bus at 667 MHz, 64-bit data, 36-bit address - System, video and LAN BIOS shadowing - Memory bus at 400 MHz, 144-bit data (2 channel) - Robust BIOS flash Update with rollover capability of each CPU engine Expansion slots - Advanced Configuration and Power Interface (ACPI 1.0, 2.0 & 3.0) - CPU 0 supports 1 Mid-Size AdvancedMC bay AMC.1 Type 4 compliant – x4 - Console redirection to serial port (VT100)with CMOS setup access, and SOL PCI Express, AMC.3 compliant – dual port SAS/SATA (Serial over LAN) System Memory - Field updateable BIOS - CPU 0 : Up to 8GB DDR2 400 MHz, ECC, SDRAM on 2 DIMM sockets - Event (SERR, PERR, correctable/uncorrectable ECC, POST errors, PCI-Express) log support to IPMC - CPU 1&2 : Up to 4GB DDR2 400 MHz, ECC, SDRAM on 1 DIMM socket OS Compatibility - Up to 4GB of Flash Disk for each CPU engine - Red Hat Enterprise Linux V.5, Wind River Linux PNE 1.4 Flash Memory IPMI Features - Two redundant 1MB BIOS (Field software upgradeable) - Management Controller compliant to PICMG 3.0, AMC.0, Rev 2.0 and IPMI v1.5 - Roll back functionality controlled by IPMC rev 1.1. Storage - SMHC: AT8030 behave exactly like Carrier AMC that includes 3 processors AMC - CPU 0 supports 2 ports SAS available via AdvancedMC card or through + 1 AMC Bay Rear I/O - Remote control capability of each CPU engines via any IPMI channels (power cycle / warm reset / cold reset) - Onboard PATA Flash drive (2GB) - Robust IPMI flash Update with rollover capability and without any payload Connectors impact of each management controller (HPM.1 ready) - 2x 10/100/1000 Base-T RJ45 on CPU 0 - Extensive sensors monitoring and event generation on thresholds, including - 1x serial RJ45 overheat alarms - 4x USB 2.0 Front (2x CPU 0 & 1x CPU 1 & 1x CPU 2) - Standard IPMI host interface with IPMI watchdog for each CPU engine - Push-button on Front for serial port Serial over LAN (+LAN access to BIOS menu setup) and IPMI over LAN (IPMI Reliability v2.0) from each CPU engine - MTBF: >TBD hours - Management Controller self test which can detect failure under its code integ- rity and trigger an automatic rollback. - Whole board protected by active breaker - CPU Remote warm/cold reset via standard PICMG FRU control command - USB voltage protected by an active breaker - Fast interrupt driven SMS host interface compliant to IPMI-KCS v1.5 rev 1.1 Safety / EMC - Designed to meet or exceed - Hardware config that allows activation of the blade or AMC without Shelf - Safety: UL 60950-1; CSA C22.2 No 60950-00; EN 60950-1:2001; Manager intervention. IEC60950-1 Supervisory - EMI/EMC: FCC 47 CFR Part 15, Class A; CE Mark to EN55022/EN55024 - Supports a system management interface via an IPMI V1.5 compliant controller Board Specifications - Watchdog for BIOS execution and OS loading (through IPMI watchdog) - PICMG3.0 R2.0 - ATCA (upcoming R3.0 targeted) - Hardware system monitor (voltages, temperature), CPU temperature - PICMG3.1 R1.0 - Ethernet/Fiber Channel ATCA monitor / alarm; board temperature sensor, power failure through IPMC - AMc.0/1/3 Power R equirements XAUI/Gigabit Ethernet Switch TBD W* -38V @ -72V - On board Ethernet Switch (24-Port GbE Multilayer) * The power consumption will vary depending on your product configuration - 10-Gigabit XAUI fabric connection to Fabric Interface Environmental Operating Storage and Transit - Optional “Small Mesh” configuration, i.e. full mesh topology for smaller 5 Temperature*: 0 to 55 °C / 32 to 131°F -40 to 70°C / -10 to 158°F or 6-slot chassis Humidity*: 5% to 90% @40°C / 104°F 5% to 95% @40°C / 104°F - Power PC Processor for switch management non-condensing non-condensing - Core frequency >1GHz Altitude*: 4 000m / 13,123 ft 15 000m / 49,212 ft Shock*: 5G each axis Belcore GR-63-CORE - External memory on SO-CDIMM (512MB DDR2 400 MHz with ECC support) Section 4.3 Target Certifications Vibration*: 5-500Hz. 1G, each axis 5-50Hz, 2G; 50-500Hz, 3G each axis - UL, CE, NEBS Level 3 (designed for), FCC B; CP-TA Airflow: TBD Warranty * Designed to meet or exceed. Two years limited warranty Corporate Offices  Europe, Middle East & Africa North America Asia Pacific Kontron AG Kontron America Asia Pacific Oskar-von-Miller-Straße 1 Corporate Office 4F, No. 415, Ti-Ding Blvd., 85386 Eching/Munich - Germany 14118 Stowe Dr Sec.2, NeiHu District Poway, CA 92064-7147 Taipei, Taiwan 114 Tel.: +49 (0)8165 77 0 Tel. +886-2-2799-2789 Fax: +49 (0)8165 77 279 Tel.: (858) 677-0877 Fax +886-2-2799-7399 Fax: (858) 677-0898 sales@kontron.com sales@us.kontron.com sales@kontron.com.tw www.kontron.com AT8030 V 1.0 06/2007 All data is for information purposes only and not guaranteed for legal purposes. Subject to change without notice. Information in this datasheet has been carefully checked and is believed to be accurate; however, no responsibilty is assumed for inaccurancies. Kontron and the Kontron logo are registered trademarks of Kontron AG. All brand or product names are trademarks or registered trademarks of their respective owners. ISO 9001:2000 Quality System Registered.