FAW 12-4.2K - KEPCO - Elite.Parts

Description

Kepco FAW 12-4.2K 50W Power Supply; 12 V (10.8-13.2 V Adj Range), 0-4.2 A @ 0-50°C 35 mV Switching Ripple (Typical with 70 mV Max) and

Part Number

FAW 12-4.2K

Price

Request Quote

Manufacturer

KEPCO

Lead Time

Request Quote

Category

PRODUCTS - F

Datasheet

FAK 15-1.7K.pdf

778 KiB

Download

Extracted Text

SERIES FAW DIN-RAIL MOUNTABLE Series FAW wide range input (85-264V a-c) accommodates mains power everywhere without a selector. UL recognized, CSA certiŢed and approved by TÜV. Onboard VDE 0871, level B EMI Ţlter. Power OK logic. Optional metal enclosure. FEATURES • Power OK LED: Green. • Power OK logic: Open collector. • a-c input 85-264V; d-c input 105-370V. Note: Safety recognition for FAW applies to a-c operation only. The Family of FAW Models • Operating frequency: 120-130KHz. • Soft-start circuit: Limits a-c turn-on surge. • Adjustable voltage: Internal trimmer. FAW MODEL TABLE • Holding time: Output is sustained by OUTPUT SWITCHING (1) OVP CURRENT CURRENT RIPPLE NOISE internally stored energy for 20ms typical, OUTPUT ADJUSTMENT SETTING (AMPS) LIMIT mV (spike) 15ms minimum. MODEL VOLTS RANGE (VOLTS) 0-50°C (AMPS) typ max mV max 15 WATT MODELS • Built-in EMI ﬁlter: Attenuates the (2) FAW 5-3K 5 4.5-5.5 6.0-6.9 0-3.0 3.3-5.5 15 30 <120 conducted noise below the requirements of (2) FAW 12-1.3K 12 10.8-13.2 13.7-15.7 0-1.3 1.4-2.5 10 30 <190 both FCC and VDE 0871 for Class B (2) computing devices. Optional perforated FAW 15-1K 15 13.5-16.5 17.0-19.0 0-1.0 1.1-2.0 10 30 <220 (2) metal covers attenuate radiated noise and FAW 24-0.7K 24 21.6-26.4 27.0-30.5 0-0.7 0.8-1.4 20 50 <310 provide protection. 25 WATT MODELS (2) FAW 5-5K 5 4.5-5.5 6.0-6.9 0-5.0 5.5-7.5 31 62 <120 • Safety: FAW are recognized by UL 1950, (2) FAW 12-2.1K 12 10.8-13.2 13.7-15.7 0-2.1 2.3-3.3 32 65 <190 certiﬁed by CSA 1402C and approved by (2) FAW 15-1.7K 15 13.5-16.5 17.0-19.0 0-1.7 1.9-2.8 42 85 <220 TÜV Rheinland to EN60950. (2) FAW 24-1.1K 24 21.6-26.4 27.0-30.5 0-1.1 1.2-1.8 57 115 <310 • Connections: Input and output screw 50 WATT MODELS terminal barrier strip. (3) FAW 5-10K 5 4.5-5.5 6.0-6.9 0-10.0 10.5-12.0 30 60 <120 • Remote error sensing: The 50, 100 and (3) FAW 12-4.2K 12 10.8-13.2 13.7-15.7 0-4.2 4.4-5.1 35 70 <190 150W FAW provide separate remote error (3) FAW 15-3.4K 15 13.5-16.5 17.0-19.0 0-3.4 3.6-4.1 45 90 <220 sense terminals: 0.25V drop/wire. (3) FAW 24-2.1K 24 21.6-26.4 27.0-30.5 0-2.1 2.2-2.6 50 100 <310 (3) FAW 48-1K 48 43.2-52.8 53.5-60.0 0-1.0 1.1-1.3 60 150 <350 • Optional Steel Enclosures: 100 WATT MODELS Size 15W 25W 50W 100W 150W (3) FAW 5-20K 5 4.5-5.5 6.0-6.9 0-20 21.0-24.0 30 60 <120 Model CA 24 CA 25 CA 26 CA 27 CA 28 (3) FAW 12-8.3K 12 10.8-13.2 13.7-15.7 0-8.3 8.7-10.0 35 70 <190 (3) FAW 15-6.6K 15 13.5-16.5 17.0-19.0 0-6.6 7.0-8.0 45 90 <220 (3) FAW 24-4.2K 24 21.6-26.5 27.0-30.5 0-4.2 4.4-5.2 50 100 <310 (3) FAW 28-3.5K 28 25.2-30.8 32.0-35.0 0-3.5 3.7-4.2 60 120 <330 (3) FAW 48-2K 48 43.2-52.8 53.5-60.0 0-2 2.1-2.4 80 160 <530 150 WATT MODELS (3) FAW 5-30K 5 4.5-5.5 6.0-6.9 0-30 32.0-36.0 30 60 <120 (3) FAW 12-12K 12 10.8-13.2 13.7-15.7 0-12 13.0-15.0 35 70 <190 FAW are CE marked per the Low Voltage (3) Directive (LVD), EN60950. FAW 15-10K 15 13.5-16.5 17.0-19.0 0-10 11.0-13.0 45 90 <220 (3) FAW 24-6K 24 21.6-26.4 27.0-30.5 0-6 6.3-7.0 50 100 <310 (3) FAW 28-5K 28 25.2-30.8 32.0-35.0 0-5 5.3-6.1 60 120 <330 AN ISO 9001 COMPANY (3) FAW 48-2.8K 48 43.2-52.8 53.5-60.0 0-2.8 3.0-3.5 80 160 <530 (1) When the overvoltage protector trips off, a reset requires the mains power be interrupted for 120 seconds. (2) Foldback type characteristic. (3) Square type or Rectangular type characteristic. KEPCO, INC. • 131-38 Sanford Avenue • Flushing, NY 11352 USA • Tel: (718) 461-7000 • Fax: (718) 767-1102 Email: hq@kepcopower.com • www.kepcopower.com/faw.htm 105 FIGURE 1 Power OK Signal Related to Output FAW INPUT CHARACTERISTICS RATING SPECIFICATION CONDITION All Models a-c nom 100-240V a-c Single phase Voltage range 85-264V a-c (3) d-c Voltage range 105-370V d-c Polarity insensitive (3) Brown-out min 80V a-c/97V d-c Ripple, source and Voltage load effect increase Frequency nom 50-60Hz Single phase (1) range 47-440Hz EMI FCC and VDE 0871 Conducted Class B Soft-start Circuit Thermistor limiter Leakage max 0.5mA UL method 120V a-c 50-60Hz Logic 1 Current max 0.75mA VDE method 240V a-c 50-60Hz Model E (min) (min) (max) 1 (2) Start-up max 500msec From turn-on until d-c 5V 4.5V 2.5V Time output reaches nominal Hold-up typ 20msec 120V a-c 12V 9.5V 5V Time min 15msec 100V a-c 50µs recovery 2ms To within 1% AN ISO 9001 COMPANY (1) FAW 15W and 25W: 2.6%. KEPCO, INC. • 131-38 Sanford Avenue • Flushing, NY 11352 USA • Tel: (718) 461-7000 • Fax: (718) 767-1102 106 Email: hq@kepcopower.com • www.kepcopower.com/faw.htm PERCENT OUTPUT POWER RATING OPEN FRAME DIMENSIONS (HxWxD) FAW GENERAL SPECIFICATIONS 15W inches — 0.98 x 3.74 x 3.94 mm — 25 x 95 x 100 SPECIFICATION RATING/DESCRIPTION CONDITION 25W inches — 0.98 x 3.74 x 4.92 Temperature 0-71°C (see Fig. 2) Operating mm — 25 x 95 x 125 -40°C to +85°C Storage 50W inches — 0.98 x 3.74 x 6.50 Humidity 95% RH Non-condensing, mm — 25 x 95 x 165 operating & storage Shock 20g, 3 axes (11msec Non-operating, 100W inches — 1.38 x 3.74 x 7.87 ±5msec pulse duration) 3 shocks each axis mm — 35 x 95 x 200 Vibration 5-10Hz: Non-operating, 10mm amplitude 3 axes 150W inches — 2.01 x 3.74 x 7.87 1 hour each axis mm — 51 x 95 x 200 10-55Hz: 2g, 3 axes Isolation Output to case 500V d-c, 100MΩ 25°C, 65% RH Enclosure Optional metal CASED DIMENSIONS (HxWxD) Type of Construction PC card, L-chassis Cooling Convection 15W case (CA 24) inches — 1.18 x 3.74 x 3.94 Withstand Input to output 3.75KV a-c for 1 minute mm — 30 x 95 x 100 Voltage Input to case 2KV a-c for 1 minute 25°C, 65% RH, 15W, 25W, 50W 25W case (CA 25) Y cap removed Withstand Input to output 3KV a-c for 1 minute inches — 1.18 x 3.74 x 4.92 Voltage Input to case mm — 30 x 95 x 125 2KV a-c for 1 minute 100W, 150W 50W case (CA 26) Safety UL 1950, inches — 1.22 x 3.74 x 6.50 CSA 1402C, mm — 31 x 95 x 165 EN60950 100W case (CA 27) inches — 1.57 x 3.74 x 7.87 mm — 40 x 95 x 200 OUTLINE DIMENSIONAL DRAWINGS 150W case (CA 28) Fractional dimensions in light face type are in inches, dimensions in bold face type are in millimeters. inches — 2.17 x 3.74 x 7.87 mm — 55 x 95 x 200 WEIGHT (Packed for shipment) 15W 9.52oz, 270gm Tolerances: 0.04˝ (1.0mm) 25W 10.68oz, 300gm unless otherwise noted 50W 15.90oz, 400gm Mounting: 4-40 tapped holes — 100W 2.2lbs, 1.0Kg (2) side; maximum screw 150W 2.6lbs, 1.2Kg penetration 0.2 (5mm) (1) (2) MODEL A B C D E F G H K L M N 3.94 3.74 3.35 0.30 2.76 0.32 3.35 0.30 0.49 0.98 1.18 15 WATTS — 100 95 85 7.5 70 8 85 7.5 12.5 25 30 4.92 3.74 4.33 0.30 2.76 0.32 4.33 0.30 0.49 0.98 1.18 25 WATTS — 125 95 110 7.5 70 8 110 7.5 12.5 25 30 6.50 3.74 5.71 0.51 2.95 0.59 5.51 0.59 0.49 0.98 1.22 — 50 WATTS 165 95 145 13 75 15 140 15 12.5 25 31 7.87 3.74 6.69 0.67 2.95 0.31 6.69 0.59 1.38 1.57 0.79 100 WATTS — 200 95 170 17 75 8 170 15 35 40 20 7.87 3.74 6.69 0.67 2.95 0.31 6.69 0.59 2.01 2.17 1.18 150 WATTS — 200 95 170 17 75 8 170 15 51 55 30 (1) Open frame. (2) With cover (optional). KEPCO, INC. • 131-38 Sanford Avenue • Flushing, NY 11352 USA • Tel: (718) 461-7000 • Fax: (718) 767-1102 Email: hq@kepcopower.com • www.kepcopower.com/faw.htm 107

Frequently asked questions

At GID Industrial (Elite.Parts' parent company), we specialize in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

Warranties differ by part and by which suppliers we use to procure it for you. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Elite.Parts can ship via FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Absolutely! We are happy to serve customers regardless of location. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

All major credit cards are accepted: Visa, MasterCard, Discover, and American Express. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products