KANSON ELECTRONICS INC 1073-1-P-2-A-1-1
Specifications
DEGREE OF PROTECTION
IP50 (standard, IP65 (special)
ELECTRICAL LIFE
100,000 operations minimum (at full rated load)
FREQUENCY
50/60Hz (AC Models)
HOUSING
Polycarbonate
MECHANICAL LIFE
20,000,000 operations
MOUNTING
Plug-in or Panel Mount
OPERATING TEMP
-10° to 50° C (-14° to 122° F)
OUTPUT TYPE
Electromechanical relay
POWER CONSUMPTION
10V A (100-240V AC), 2.5V A (24V AC), 2W (12VDC & 24VDC)
RATING
5A @ 240V AC (resistive)
REPEAT ACCURACY
±0.3% of setting
RESET TIME
100 msec minimum
TERMINATION
8-pin socket or screw terminals
TIME RANGE
0.01 to 500 hours in 16 ranges
TIMING TYPE
Output B: On Delay only. Output A: On Delay , Repeat Cycle Start Off, Repeat Cycle Start On, Interval, One Cycle
TIMING VARIATION VS. TEMP
±2% maximum
TOLERANCE (VOLTAGE)
-15% to +10% of nominal
TRANSIENT PROTECTION
MOV
VOLTAGE
100-420V AC, 24V AC/DC, 12VDC
Features
- 100-240 V AC, 24 V AC/DC or 12 VDC input
- 5 amp relay output
- 5 timing functions
- Input power initiates the timing sequence
- Power and output indication LEDs
- Time ranges from 0.1sec to 500 hr
Datasheet
1073-1-P-2-A-1-1-d-1084050487s.pdf
1005 KiB
Extracted Text
® I INDUSTRIAL SOLID STATE MODEL 1073 Kanson Electronics, Inc. TIMER PLUG-IN Multifunction timer with instant contacts or ON delay timer. Features: •5 timing functions. •Input power initiates the timing sequence. •Time ranges from 0.1sec to 500 hr. •100-240 VAC, 24 V AC/DC or 12 VDC input. •5 amp relay output. •Power and output indication LEDs. U C TIMING ON DELAY - output B • Control is affected with power application. • When power turns on, delay time elapses before output turns on. • The output remains on until the unit is reset by removing power. ON - ON DELAY - output A • Control is affected with power application. • When power turns on, delay time elapses before timed output turns on. • The timed output remains on until the unit is reset by removing power. • Instant output directly follows control input. FL - REPEAT CYCLE START OFF - output A • Control is affected with power application. • When power turns on, the output remains off while time elapses. • The output then turns on while time elapses. • This cycle then repeats until power is removed from the unit. • Instant output directly follows control input. FO - REPEAT CYCLE START ON - output A • Control is affected with power application. • When power turns on, the output turns on while delay time elapses. • The output then turns off while delay time elapses • This cycle then repeats until power is removed from the unit. • Instant output directly follows control input. ® MODEL 1073 I INDUSTRIAL SOLID STATE PLUG-IN Kanson Electronics, Inc. TIMER TIMING (cont) OS - INTERVAL - output A • Control is affected with power application. • When power is applied, timed output turns on and remains on till delay time is elapsed or power is removed. • Instant output directly follows control input. OC - ONE CYCLE - output A • Control is affected with power application. • When power turns on, delay time elapses before output turns on. • The delay then restarts and output turns back off once delay time has elapsed. • Instant output directly follows control input. SPECIFICATIONS INPUT VOLTAGE: 100-420VAC, 24VAC/DC, 12VDC FREQUENCY: 50/60Hz (AC Models) TOLERANCE (VOLTAGE): -15% to +10% of nominal POWER CONSUMPTION: 10VA (100-240VAC), 2.5VA (24VAC), 2W (12VDC & 24VDC) TRANSIENT PROTECTION: MOV OUTPUT TYPE: Electromechanical relay MECHANICAL LIFE: 20,000,000 operations ELECTRICAL LIFE: 100,000 operations minimum (at full rated load) RATING: 5A @ 240VAC (resistive) TIMING TYPE: Output B: On Delay only Output A: On Delay, Repeat Cycle Start Off, Repeat Cycle Start On, Interval, One Cycle REPEAT ACCURACY: ±0.3% of setting RESET TIME: 100 msec minimum TIME RANGE: 0.01 to 500 hours in 16 ranges PHYSICAL OPERATING TEMP: -10° to 50° C (-14° to 122° F) TIMING VARIATION VS. TEMP: ±2% maximum MOUNTING: Plug-in or Panel Mount TERMINATION: 8-pin socket or screw terminals HOUSING: Polycarbonate DEGREE OF PROTECTION: IP50 (standard, IP65 (special) ® MODEL 1073 I INDUSTRIAL SOLID STATE PLUG-IN Kanson Electronics, Inc. TIMER WIRING OUTPUT A Timed Instant *Polarity indicated for Instant Timed DC Models only. OUTPUT B *Polarity indicated for DC Models only. DIMENSIONS inch (mm) ® MODEL 1073 I INDUSTRIAL SOLID STATE PLUG-IN Kanson Electronics, Inc. TIMER MOUNTING mm PANEL MOUNT DIN RAIL MOUNT Panel mount clip 8 Pin socket RP- RP-325 allows 320 has built in access to the hold down clips timer face though and is DIN rail the panel. compatible. ORDERING DATA ORDERING CODE 1073 - 1 - P - 2 - A - 1 - 1 BASIC MODEL NUMBER 1073 INPUT VOLTAGE 1 100-240 VAC 2 24 V AC/DC 3 12 VDC TIME RANGE P secs mins hrs 10 hrs 0.1-1.0 0.1-1.0 0.1-1.0 1.0-10 0.5-5.0 0.5-5.0 0.5-5.0 5.0-50 1.0-10 1.0-10 1.0-10 10-100 5.0-50 5.0-50 5.0-50 50-500 TIMING FUNCTION and OUTPUT 1 - B ON Delay with DPDT relay 2 - A ON Delay, Repeat Cycle, Inteval, One Cycle Timed relay SPDT and Instant relay SPDT TERMINATION 1 8 pin plug-in base 2 Screw terminals DEGREE OF PROTECTION 1 IP50 Standard 2 IP65 Sealed unit APPLICABLE ACCESSORIES See accesory section for details 8 pin socket RP-320 8 pin reversible socket RP-321 8 pin cable socket RP-323 Panel mount clip RP-325 Stop rings RP-327
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the 1073-1-P-2-A-1-1 have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods