ITOX CS15-SN
Specifications
Dependability
DFI-ITOX industrial-grade enhancements. Watchdog timer. Thermal monitor and alarm.
High Performance
Front side bus speeds to 133 MHz. Tested with 1 GHz CPUs. Intel 815E chipset. Intel Hub architecture for fast I/O.
Long and stable life cycle
Revision control helps customers avoid the expenses of changing and recertifying their products.
MTBF
approx 100,000 hours at 45 degrees Celsius and 81,992 hours at 55 degrees Celsius (Standard Reliability Prediction method)
Operation
0 to 50 degrees Celsius (ambient) at 20% to 80% relative humidty (non-condensing)
Processor
Intel Celeron
Storage
-20 to 75 degrees Celsius (ambient) at 10% to 95% relative humidity (non-condensing)
Features
- 3 LAN, 1 PCI, 12 VDC power
- Dependability DFI-ITOX industrial-grade enhancements Watchdog timer Thermal monitor and alarm.
- High performance. Front side bus speeds to 133 MHz. Tested with 1 GHz CPUs. Intel 815E chipset. Intel Hub architecture for fast I/O.
- Industrial-grade Enhanced for rigorous industrial applications by using long life and extra margin capacitors, superior PCB substrates, and improved heat sinks.
- Long and stable life cycle Revision control helps customers avoid the expenses of changing and re certifying their products.
- On-board Ethernet one or three Ethernet depending on model.
- PCI expansion up to 3 full length PCI cards depending on motherboard model.
- The CS15-SN system board is equipped with a 90o PCI slot located on the solder side of the board
- The CS15-SN system board uses the DC-DC power board -+12V input over 110W adapter with 4 defined pins
- Thermal protection Monitors processor and system temperature as well as CPU fan operation. Triggers alarms if operating conditions are exceeded.
- Watchdog timer Configurable watchdog timer reboots the system and restarts the software in the event that noise spikes or other conditions suspend software or processor operations.
Datasheet
Extracted Text
CS15 Series REVISION CONTROLLED MOTHERBOARDS Choice of One or Three LAN EBX format Socket 370 for Intel Pentium III and Celeron Zero to Three PCI slots Video, Watchdog Timer, and Thermal monitor 8” (20.3 cm) Photograph GCS15-SL above shows 1LAN, 1 PCI, and 12 VDC power FEATURES Revision Control: Revision control extends motherboard projected availability to three years or longer from first shipment. Industrial-grade: Enhanced for rigorous industrial applications by using long life and extra margin capacitors, superior PCB substrates, and improved heat sinks. Watchdog Timer: Reboots the system and restarts the software in the event that noise spikes or other conditions suspend software or processor operations. Thermal protection: Monitors processor and system temperature as well as cpu fan operation. Triggers alarms if operating conditions are exceeded. PCI expansion: Up to 3 full length PCI cards depending on motherboard model. On-board Ethernet (LAN): One or three Ethernet (LAN) depending on model. BENEFITS High performance: Front side bus speeds to 133 MHz. Tested with 1 GHz CPUs. Intel 815E chipset. Intel Hub architecture for fast I/O. Long, stable life cycle: Revision control helps customers avoid the expenses of changing and recertifying their products. Dependability: ITOX industrial-grade enhancements. Watchdog timer. Thermal monitor and alarm. APPLICATIONS Networking: Superb for high-density. 4 complete servers fit in a 1U height (see ITOX Twin Dragon). Computer telephony: Up to three full length PCI slots for voice messaging and PBX stations. Security: On-board LAN allows users to isolate internal, external, and control channels. Embedded applications: The compact CS15 requires the same space as 5.25” drive. Manufacturers of medical, process control, measurement and other products can take advantage of this small form factor to embed the CS15 in their products. PC appliances: Motherboard is small and powerful. Watchdog timer maintains dependable operation in an adverse environment. 5.75” (14.6cm) Revision Controlled CS15 Series Motherboards ® MODELS1 Intel 82559 Fast Ethernet Controller (L models) ® • GCS15-BL 1 LAN, 0 PCI, 115V/230V via ATX supply2 Intel 82559 and 1 82562 Fast Ethernet Controllers (N models) GCS15-BN 3 LAN, 0 PCI, 115V/230V via ATX supply (not stocked,Full duplex support at both 10 and 100 Mbps ® OEM only)Alert on LAN 1.0 for Intel 82562 Fast Ethernet Controller GCS15-SL 1 LAN, 1 PCI, 12 VDC power DAMAGE FREE INTELLIGENCE GCS15-SN 3 LAN, 1 PCI, 12 VDC powerMonitor and alarm for CPU/system temperature GCS15-EL 1 LAN, 3 PCI, 115V/230V via ATX supplyMonitor and alarm for 5VSB/VBAT/1.5V/3.3V/5V/±12V voltages GCS15-EN 3 LAN, 3 PCI, 115V/230V via ATX supplyMonitor and alarm for cpu fan speed Watchdog comparison of all monitored values PROCESSORRead back to display temperature, voltage, fan speed Socket 370 FCPGASupports Intel processor thermal sensor ® Intel Pentium III FCPGASupports hardware random number generator for security TM ® Intel Celeron FCPGA ENERGY EFFICIENT DESIGN TM ® Intel Celeron PPGASupports ACPI and OS Director Power Management ® Socket detects required processor voltage (1.30V to 2.05V)Wake-ON keyboard, mouse, LAN (Intel 82562 Fast Ethernet Controller) CHIPSETRTC timer for power-on ®Intel 815ECPU stopped clock control Supports 66, 100 and 133 MHz front side busHardware supported SMI green mode CACHE MEMORYMicrosoft / Intel APM 1.2 compliant On processor: Pentium III 256 KB, Celeron 128 KBSoft power supported, ACPI v1.0a specification SYSTEM MEMORYAC power failure recovery Up to 512MB memory CONNECTORS 2 connectors for 144-pin Stack SODIMM1 DB-9 COM1 serial (internal header for COM2 serial) Supports x64 PC-133/PC-100 SDRAM2 USB ports BIOS1 or 3 RJ45 10/100MHz Ethernet ports Award BIOS, Windows 95/98/2000 Plug and Play compatible1 mini-DIN-6 PS/2 mouse port 4 Mbit Flash EPROM allows BIOS upgrades1 mini-DIN-6 PS/2 keyboard port Includes Symbios Logic SCSI BIOS, supports SCSI sequential boot-up1 DB-15 video port Supports DMI 2.0 functions2 connectors for CPU and system fans COMPATIBILITYSupports 0 or 1 2.88MB floppy drive Microsoft PC’99 compliantParallel (internal header) VESA Display Power Management Signaling (DPMS) EXPANSION SLOTS VESA DDC2B for Plug and Play monitors0, 1, or 3 PCI depending on model Supports PCI 2.2 specificationsPCI cards are positioned below motherboard ONBOARD GRAPHICS PHYSICAL / PCB Intel Dynamic Video Memory Technology (shares 1 MB system memory)6 layer EBX form factor PCB 3D hyper pipelined architecture5.75” (14.6 cm) x 8” (20.3 cm) 2D hardware and motion video acceleration ENVIRONMENTAL 9-bit hardware motion compensation for software MPEG2 decodeOperation: 0 to 50 degrees Celsius (ambient) at 20% to 80% relative Software DVD humidty (non-condensing) 2D to 1600x1200Storage: -20 to 75 degrees Celsius (ambient) at 10% to 95% relative 3 operand Raster BitBlts humidity (non-condensing) 64x64x3 color transparent cursorMTBF: approx 100,000 hours at 45 degrees Celsius and 81,992 hours at Flat and Gouraud shading 55 degrees Celsius (Standard Reliability Prediction method) MIP mapping with tri-linear anisotropic filtering SAFETY Full-color specular / Z-bufferingUL: UL60950, Third Edition Fogging atmospheric effectCSA: CAN/CSA-C 22.2 No. 950-95 3D pipe 2D clipping / backface cullingFCC: Part 15 Class B ® ®Software drivers: Windows 95/98/2000, Windows NT 4.0CE: 98 PCI IDE INTERFACE Supports Ultra ATA/100 hard drives PIO Mode 4 Enhanced IDE with data transfer to 14 MB/sec Bus mastering reduces CPU use during disk transfer Supports ATAPI CD-ROM, LS-120, and ZIP NETWORKING IEEE 802.3 10BASE-T and 100BASE-TX compatible PHY Specifications subject to change 8 Elkins Road without notice. ITOX is a East Brunswick, NJ 08816 registered trademark of ITOX, Inc. 732-390-2815 Other product names are registered Toll-free: 1-888-200-ITOX trademarks or trademarks of their respective companies. FAX: 732-390-2817 MA-SD-059-0502
Frequently asked questions
What makes Elite.Parts unique?

What kind of warranty will the CS15-SN have?

Which carriers does Elite.Parts work with?

Will Elite.Parts sell to me even though I live outside the USA?

I have a preferred payment method. Will Elite.Parts accept it?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods