iMediaChassis Series SNMP Manageable Fiber Connectivity Platform Supports Multiple Protocols Reliable and flexible, the iMediaChassis series has the highest port density of any modular, intelligent, carrier-class optical access platform in the industry. The iMediaChassis series is an intelligent, carrier-class optical access platform that sup- ports Ethernet, ATM/SONET, T1/E1, DS3/E3/STS-1 and WDM networking technologies. The iMediaChassis Series enables network operators to drastically reduce the capital and operational expenses by providing all copper-to-fiber and multi-mode to single-mode conversions, network distance extensions and Ethernet Private Line services from the Media management made easy; same chassis platform. Having the highest port density in the industry, along with a robust SNMP management module includes design, hot-swappable architecture, SNMP-management, and redundant power supplies • GUI-based iView² application software for fault tolerance, makes the iMediaChassis ideal for installing in the central office (CO) SNMP V2c agent where a multitude of diverse applications, using a variety of protocols, is required. Pair Supports the Unified Management Agent this multi-slot chassis with a MediaChassis* or another standalone IMC Networks unman- (UMA) aged device at the customer premises (CPE). The iMediaChassis series includes:DB-9 connector and cable for serial con- figuration • 6-slot (1U high) and 20-slot (3U high) models for installing iMcV series modules* DHCP and TFTP client  An additional slot for installing an optional SNMP management moduleSupport for Telnet  A Dynamic Host Configuration Protocol (DHCP) client that makes initial config-Last Gasp feature sends notification of AC line uration easy by automatically assigning an IP address for the iMediaCenter chas- failures and power supply failures sis when connected to a local area network with a DHCP server Meets various installation/application  An SNMP Write Lock switch that protects the configured settings of installed modules requirements from being overwritten when removing the management module from the chassis. SNMP-manageable chassis for the CO;  Numerous Traps which help to identify and troubleshoot problems quickly: 6-slot and 20-slot models available  A Loss of Link trap notifies network operators of potential problems by reporting to Available with AC or DC power the NMS which module/port (along with it's description) is experiencing difficulty  The Last Gasp trap announces when the AC line fails, when power supplies are Robust, modular design powered down or in the possibility of a power supply failureHighest port density with 20-slot chassis User replaceable fans and power  Additional traps and LEDs indicate problems with fans and power supplies, and supplies in 20-slot chassis elevated chassis temperature levels, etc.  Option for redundant AC or DC power supplies Install a wide variety of media modules  Mix and match AC and DC power supplies in the same chassis (6-slot chassis only) 10, 100 and 1000 Mpbs Ethernet and  Field-replaceable fans (20-slot chassis only) and power supplies T1/E1/J1 copper-to-fiber converters  Temperature controlled fans activate only when chassis reaches a certain temperature,10 Mbps Ethernet copper-to-coax converters thereby extending the life of the fans (6-slot chassis only) 10/100 Mbps autosensing copper-to-  Temperature monitoring gauge fiber converters DS3/E3 copper-to-coax converters Application Example End to end remote fiber management Install iMediaChassis at a central office and pair with MediaChassis populated with iMcV Fiber mode converters series modules at each remote location, then monitor all connections from the central site. Fiber optic repeaters Eases troubleshooting SNMP management, fan tachometers, and LEDs assist in diagnosing problems * Please refer to the respective datasheets on the MediaChassis series, UMA, and each iMcV module for more information. www.imcnetworks.com 800-624-1070 www.mediaconverter.com Easily configure and manage converters with the GUI-based iView²: The iMediaChassis’ management module includes the iView² SNMP management appli- cation software, a DB-9 port for initial configuration, an RJ-45 port for management, plus support for Telnet sessions, and a Dynamic Host Configuration Protocol (DHCP) client that makes initial configuration easy by automatically assigning an IP address for the iMediaChassis chassis when connected to a local area network with a DHCP server. iView² allows for easy configuration and the setting of management traps in minutes. iView² runs standalone on Windows NT/XP/2000, as a standalone Java Application for other operating systems,as a snap-in module for HP OpenView, as a Web Server running under IIS or as a Java Web Servlet. For assistance in selecting the right ver- sion of iView² for your operating system, please visit http://www.imcnetworks.com/go/iview2. The iMediaChassis series also supports the Unified Management Agent (UMA); UMA allows you to manage all installed devices, including those with on-board intelligence such as FiberLinX, with a single IP address and from a central location. Technical Specifications Dimensions: 5.2”H x 19.0”W x 13.8”D iMediaChassis SNMP Module · Enable/Disable Ports All iMediaChassis (13.21cm H x 48.26cm W x 35.05cm D)  Installs in any iMediaChassis · Enable/Disable FO/FX LinkLoss  SNMP-manageable with use of AC Input Load: 100/240 VAC ±10%  SNMP V1 and V2c compatible · Enable/Disable TP/TX LinkLoss SNMP module 50/60Hz, 1Amp @ 115V and 0.5Amps @  Includes GUI-Based iView² · Enable/Disable FiberAlert SNMP Write Lock switch protects the 230V (dual power)  Supports Unified Management Agent · Enable/Disable Auto-Negotiation SNMP-configured settings DC Input Load: -38 to -72 VDC;  Includes DB-9 connector and cable Built to NEBS-III requirements 2.5A @ -48VDC (dual power) MIB-II (RFC 1213): for serial configuration  Last Gasp feature sends notification (NOTE: This information is for the  Includes DHCP and TFTP client of AC line failures and power sup- iMediaChassis/6 iMediaChassis’ SNMP agent only)  Supports Telnet ply failures  Only 1U high · Packets Transmitted  Includes diagnostic LEDs  Available with AC or DC power Temperature controlled fans · Packets Received  Available with redundant power Shipping Weight: TBA IMC MIB: · All Standard MIB II Objects  Feature user replaceable power · Port Type · Fan speeds Dimensions: 1.75”H x 17.35”W x 10.65”D supplies (4.45cm H x 44.07cm W x 27.05cm D) · Traps · Fiber Type Specifications for Series · Module Type AC Input Load:100/240 VAC ±10% iMediaChassis/20 Regulatory Approvals: 50/60Hz 0.5A @ 115V and 0.25A @ 230V · Link Status of Ports  Highest port density, 20 slots · FCC Class B · UL/cUL, CSA, CE (dual power); 1A @ 115V and 0.5A @ 230V · Chassis temperature  Features user replaceable fans Operating Temperature: 32° to 122°F (0° to 50°); (single) · Power Supply Type/Status 5% to 90% (non-condensing), 0 – 10,000 ft. altitude  Includes fan tachometers DC Input Load: 1A @ -48VDC (dual); Storage Temperature: -13° to +158°F (-25° to · User-Definable Name/ID of Product Shipping Weight: 30 lbs +70°C); 5 to 90% (non-condensing) 2A @ -48VDC (single) · User-Definable ID/Name of Each Port Ordering Information SNMP Manageable Modular Chassis Redundant Power Supplies 06-39125-AC PS/125-AC Power Module — 125 watt, 100/240 VAC ±10% (for 6-slot) 50-10953-AC iMediaChassis/6-AC — 6-slot, rackmountable, includes one 06-39125-DC PS/125-DC Power Module — 125 watt, -48 VDC ±10% (for 6-slot) PS/125-AC Power Module; option for redundancy 06-39401-AC PS/401-AC Power Module — 400 watt, 100/240 VAC ±10% (for 20-slot) 50-10953-2AC iMediaChassis/6-2AC — 6-slot, rackmountable, includes two 06-39300-DC PS/300-DC Power Module — 300 watt, -48 VDC ±10% (for 20-slot) PS/125-AC Power Modules (dual power) 50-10953-DC iMediaChassis/6-DC — 6-slot, rackmountable, includes one PS/125-DC Power Module; option for redundancy 50-10953-2DC iMediaChassis/6-2DC — 6-slot, rackmountable, includes two iMediaChassis/20-2AC PS/125-DC Power Modules (dual power) (rear view) 50-10956-AC iMediaChassis/20-Dual-AC — 20-slot, rackmountable, includes two PS/401-AC Power Modules (dual power) 50-10954-DC iMediaChassis/20-Dual-DC — 20-slot, rackmountable, includes two PS/300-DC Power Modules (dual power) iMediaChassis SNMP Management Module 50-39950 iMediaChassis SNMP Management Module iMediaChassis/6-AC (rear view) Back Up Modular Fans NOTE:You can mix and match AC and DC power 25-39954 Modular Fan Assembly for iMediaChassis/20 supplies in this 6-slot chassis. For information/part numbers for iMcV series modules, please refer to the datasheet for the respective product. Please refer to the UMA datasheet for information . Copyright © 2005 IMC Networks. All rights IMC Networks IMC Networks IMC Networks IMC Networks reserved. The information in this document is Headquarters Europe Eastern US/Latin America Fiber Consulting Services subject to change without notice. IMC Networks assumes no responsibility for any errors that may 19772 Pauling Herseltsesteenweg 268 18840 US Hwy. 19 North Suite 400 For information call: appear in this document. Specific product names Foothill Ranch, CA 92610 B-3200 Aarschot Belgium Clearwater, FL 33764 TEL: 949-465-3000 may be trademarks or registered trademarks and TEL: 949-465-3000 TEL: +32-16-550880 TEL: 727-524-8152/524-8071 (Latin) 1-800-624-1070 (US/CAN) are the property of their respective companies. FAX: 949-465-3020 FAX: +32-16-550888 FAX: 727-524-8432 +32-16-550880 (Europe) sales@imcnetworks.com eurosales@imcnetworks.com latinsales@imcnetworks.com fcs@imcnetworks.com Document #50-90954 August 2005 www.imcnetworks.com