VMICPCI-7806 ® ® ® ® Intel Pentium M/Celeron M Universal CompactPCI Single Board Computer ® GE Fanuc’s VMICPCI-7806 is a single slot CompactPCI single board computer (SBC) offering low power consumption without compromising the robustness, reliability and high performance required ® ® for demanding embedded computing applications. Available with either Intel ’s Pentium M or ® Celeron M processor technology, the VMICPCI-7806 features a 400 MHz system bus and incorporates Intel’s 855GME graphics memory controller with up to 1 Gbyte Dual Data Rate (DDR) SDRAM. The VMICPCI-7806 is ideal for I/O intensive applications thanks to Intel’s new highly integrated, small footprint 6300ESB I/O controller hub which provides dual PMC sites (64-bit/66 MHz PCI-X and 32-bit/ 33 MHz PCI), parallel and serial ATA, CompactFlash option, dual integrated serial ports, and dual USB ports. Product Features ® Fully compliant with PICMG 2.16 CompactPCI Additional VMICPCI-7806 features: Packet Switching Backplane (CompactPCI/PSB) • 6U single slot universal controller specifications, the VMICPCI-7806 features two • PICMG 2.1 Rev. 2.0 hot swap compliant Gigabit Ethernet ports, two USB 2.0 ports, two • Up to 1 Gbyte DDR SDRAM high performance 16550-compatible serial ports, • Up to 1 Gbyte CompactFlash two PMC expansion sites, optional CompactFlash, • 64-bit/66 MHz CompactPCI bus interface and IDE and floppy drive interfaces. In addition, • Integrated video controller the VMICPCI-7806 supports the Intelligent • VGA and digital LVDS video available via Platform Management Interface (IPMI) rear I/O architecture (PICMG 2.9). • User programmable watchdog timer • Passive heat sink ® • Operating system support for Windows 2000, ® ® ® Windows XP, QNX , Linux , and VxWorks imagination at work VMICPCI-7806 Specifications: • CPU • Serial Interfaces • Operating System Support — Intel Pentium M processor with either — Two 16550-compatible serial ports — Windows 2000 1.6 GHz or 1.8 GHz or Intel ◊ one accessible via RJ45 connector on — Windows XP Celeron M at 1.3 GHz front panel — QNX — Advanced L2 cache ◊ both accessible via rear panel — Linux ◊ 2 MByte (1.8 GHz Pentium M) — VxWorks • Other Interfaces ◊ 1 MByte (1.6 GHz Pentium M) — Parallel and serial ATA via rear panel • Power Reuirements ◊ 512 KByte (1.3 GHz Celeron M) — Two USB 2.0 ports via rear panel — +5 VDC (+5%, -3%, 4.5 A (typical), 6.75 A — 400 MHz system bus — One PS/2 port for keyboard and mouse maximum — Utilizes the Intel 855GME chipset and — IDE and floppy disk support — +3.3 VDC, (+5%, -3%, 1.5 A (typical), 2.0 A Intel 6300ESB I/O controller hub — Hardware reset on front panel maximum • SDRAM — Status LEDs on front panel — +12 VDC (+5%, -3%), 50 mA maximum — Up to 1 Gbyte DDR SDRAM via one SODIMM — User programmable watchdog timer — -12 VDC (+5%, -3%), 50 mA maximum • CompactFlash • PICMG Compliance • Environmental Specifications — Up to 1 Gbyte of CompactFlash — Supports Intelligent Platform Management — Operating: 0 to +50 °C Interface (IPMI) architecture (PICMG 2.9 — Storage: -40 to +85 °C • Ethernet Rev. 1.0) — Relative humidity: 5% to 95%, — Two 10/100/1000BaseT Ethernet ports — High availability hot swap (PICMG 2.1 noncondensing ◊ Software selectable front or rear Rev. 2.0) (PICMG 2.16) • Shock — Ethernet on the backplane (PICMG 2.16 — Intel 82546EB Ethernet controller — 10 Gs, 16 ms half sine, 6 axis, Rev. 1.0) 10 pulses each • Graphics — Universal signaling support (PICMG 2.0 Rev. 3.0) — Intel 855GME graphics memory controller • Vibration — Up to 1600 x 1200 resolution — 6 Gs RMS (20 – 2000 Hz) random, • Front Panel Status LEDs — VGA and digital LVDS video available via rear 0.0185 G2 per Hz spectrum — Primary IDE interface activity I/O — Board status • Mechanical Specifications —Power • PMC Expansion — 6U single slot Eurocard form factor — Hot swap — Two PMC expansion sites — Height: 9.2 in. (233.4 mm) ◊ No. 1 PMC site is 64-bit/66 MHz PCI-X PMC — LAN activity (located on each RJ45) — Depth: 6.3 in. (160 mm) ◊ No. 2 PMC site is 32-bit/33 MHz PCI — Thickness: 0.8 in. (20.3 mm) — IEEE 1386.1 compliant Ordering Options October 26, 2004 800-657806-000 B A B C D E F VMICPCI-7806 – 0 0 0 A = Processor 0 = Reserved 1 = 1.3 GHz Celeron M Processor 2 = 1.6 GHz Pentium M Processor 3 = 1.8 GHz Pentium M Processor B = DDR SDRAM Memory 0 = 256 Mbyte 1 = 512 Mbyte 2 = 1 Gbyte 3 = Reserved C = CompactFlash 0 = No CompactFlash 1 = 128 Mbyte CompactFlash 2 = 256 Mbyte CompactFlash 3 = 512 Mbyte CompactFlash 4 = 1 Gbyte CompactFlash D through F = 0 (Options reserved for future use.) CompactPCI Rear Transition Utility Board VMIACC-0584 The VMIACC-0584 installs in the rear transition area of the CompactPCI backplane and provides access to IDE, floppy, COM 2, USB, video and keyboard/mouse functions. The VMIACC-0584 is sold separately. For Ordering Information, Call: 1-800-322-3616 or 1-256-880-0444 • FAX (256) 882-0859 Email: info.embeddedsystems@gefanuc.com Web Address: www.gefanuc.com/embedded Copyright © 2004 by GE Fanuc Embedded Systems Specifications subject to change without notice.