GE Intelligent Platforms CP9 ® High Performance 6U CompactPCI Embedded Computer Features The CP9 is a 6U CompactPCI all-in-one CPU The CP9 provides a unique feature set, ® ® ® ® board with a low power Intel Pentium M including up to 2 GB of DDR SDRAM • Intel Pentium M processor, 1.4 GHz to ® processor and dual Gigabit Ethernet channels. (200MHz) with ECC, three independent 1.8 GHz and Intel Celeron M processor The CP9 supports full hot swap and is capable on-board PCI buses, high speed support 1.0 GHz and 1.3 GHz of being used in a system or non-system for the CPCI backplane, two PMC interfaces • Optimized for front I/O (peripheral) slot. Adhering to the PICMG 2.16 (64-bit/133MHz and 32-bit/33 MHz). A high • Hot swap (full) PICMG 2.1 compliant dual Ethernet specification, the CP9 supports level of functional integration (VGA/TFT, USB, • System and non-system (peripheral) mode the 64-bit/66 MHz CompactPCI bus. serial interfaces, etc.) within a single board and wide front panel gives users the freedom • Extensive software support The CP9’s dual slot wide front panel allows to use the PMC interfaces as extension for • Up to 2 GB DDR SDRAM (200 MHZ) with ECC installation of two PMC modules and a hard their applications. This combined with a • Flash drive or local 2.5” hard disk disk or a Flash drive in parallel. This compact custom specific assembly service provides all-in-one CPU module is very well suited for • VGA/LCD up to 1600x1200 optimized price/performance for a range of I/O intensive applications in market segments OEM applications. The CP9 is also available • Two Gigabit Ethernet ports, like automation, industrial control, transpor- in an extended temperature version ranging 10/100/1000BaseT, front or rear option tation, and others. from -40°C to +85°C. • PICMG 2.16 compliant • Two PMC expansion slots, one 64-bit/133 The CP9 platform is designed to support Supported operating systems include Win- MHz and one 32-bit/33 MHz ® ® ® processors starting with 1 GHz up to 1.8 GHz. dows XP, VxWorks and Linux . QNX6 and ® It offers low power consumption and eliminates • Ultra ATA/100 on-board, second channel LynxOS are available on request. the need for on-board fans. The design is rear I/O ready to accept future higher performance The CP9 version 3.x is RoHS compliant. • 2x serial I/O with FIFOs RS-232/422/485 Intel Pentium M processor versions. interface • USB 2.0 ports, one front, four rear • Watchdog, temperature sensors • IEEE 1284 parallel port • Optional extended temperature range (-40°C to +85°C) • Customer-specific, low-cost assembly versions • RoHS compliant (version 3.x) ® CP9 High Performance 6U CompactPCI Embedded Computer (up to 1600 x 1200) LED Specifications ® • DVI-I interface (PanelLink) for TFT displays up to • Front panel LED System control CompactPCI - PLX 6254 PCI-to-PCI Bridge 1024 x 768 single channel DVI (165 MHz), EDID display • Hot swap (blue), Status (red/yellow/green) PnP supported • PICMG 2.0 R3.0 compliant cPCI local bus standard ™ Hot-Swap - compliant to PICMG 2.1 • Fully compliant support for OpenGL 1.2 for all • 64-bit PCI-to-PCI bridge for up to 8 slots (33 MHz) or • Peripheral mode: board can be inserted or removed 5 slots (66 MHz) supported Windows operating systems and Linux in a powered system • Supports system and peripheral mode ™ ™ VGA and LCD - ATI MOBILITY RADEON • System controller mode: Other, non system (periph- • J1+2, 2 mm pin and socket connectors CP9 board version 3.x only, RoHS version eral) boards can be removed or added with power on (IEC-1076-4-101) • 128/256-bit 3D and 2D and multimedia graphics BIOS Features Processor - µFCBGA, Low Power Design accelerator • New AMI BIOS Core 8, in-system programmable • Local DDR memory (16 MB or 64 MB) @ 125 MHz • Scalable processing power with flexible Flash ROM processor design to 200 MHz • CPU, memory and IDE auto-detection/selection • Intel Pentium M processor: 1.4 GHz to 1.8 GHz • 32-bit/33 MHz PCI interface • Integrated VGA and Ethernet BIOS ROM • Dual independent CRT controllers to support two • Intel Celeron M processor: 1.0 GHz and 1.3 GHz • USB mass storage support and booting capability asynchronous simultaneous display paths • High efficiency on-board switching regulator (DC/ (floppy, HDD, CDROM) DC) • RAMDAC (300 MHz to 400 MHZ) for analog • Password protection, BIOS post, system and video VGA (1600 x 1200) • Fanless cooling with heat sink BIOS shadowing • TDMS transmitter up to 165 MHz • Contact GE Intelligent Platforms for latest • Extensive setup with remappable serial/parallel (1024 x 768 at 60 Hz); DVI CPU versions ports • Fully support of OpenGL 1.3 (Windows) and Chipset - Intel E7501/P64H2/ICH4 • Operation without disk, keyboard and video xFreeX86 (Linux) • 400 MHz system bus to processor ® • Remote BIOS through serial port • Support for DirectX 6.0 to DirectX 8.1 • PCI burst mode transfers up to 1024 MB/s under Windows Software (64-bit/133 MHz) • The following software is supported to the extent EIDE- ICH4 • One 64-bit wide PCIbus with 133 MHz listed below. • Ultra ATA/100 sync. DMA mode up to 100 MB/s • One 64-bit wide PCIbus with 66 MHz • PIO mode 4 and bus master IDE up to 16 MB/s • One 32-bit wide PCIbus with 33 MHz OS On Request Planned • Two devices supported via local EIDE connector and Cache Level 1 Level 2 WIN XP - √ two devices with rear I/O Pentium M (90nm) 32 KB 2048 KB, full speed QNX 6 √ - Pentium M (130nm) 32 KB 1024 KB, full speed Serial I/O - RS232/422/485 VxWorks - √ • Two async. 16550 compatible full duplex serial Celeron M (90nm) 32 KB 512 KB, full speed Lynx OS √ - channels at rear I/O Celeron M (130nm) 32 KB 512 KB, full speed Linux - √ • High-speed transfer up to 115.2 kbaud with 16 byte Memory - DDR 200 FIFOs Front and Rear I/O (with transition module CTM12) • High-speed registered DDR SDRAM • User selectable RS232/422/485 interface • The pinouts of the transition module connectors • 72-bit wide with error correction (ECC) • COM1 optional available at front (rear I/O) correspond to standard PC connectors • 512 Mbytes to 2 Gbyte with soldered chips Parallel Port (press-fit cables). Dual Gigabit Ethernet - Intel 82546GB • Bi-directional, IEEE 1284 compatible enhanced Function Front Rear • Highly integrated Dual Channel Ethernet Controller parallel port (including EPP and ECP) for printer J3/J4/J5 with 64-bit/66 MHz PCI local bus mastering General Purpose I/O (Software configurable) • 64 Kbyte Transmit and Receive FIFO 1 DVI-I - 4 • Eight GPIO (input or output) pins • 10/100/1000BaseT auto-negotiation 1 • Interrupt capability (level, edge) VGA 4 4 • Versions with front I/O available • Compliant to PICMG 2.16 2 2 Keyboard and Mouse Eth 1 4 4 • PS/2 compatible Hard Disk or Flash Drive 2 2 Eth 2 4 4 • Internal 2.5” IDE hard disk or 2.5” flash drive (for Real-time Clock Keyb+Mouse 4 4 extended temperature range and higher shock/ • RTC 146818 compatible, on-board Li-battery vibration immunity) Reset 4 4 CMOS RAM PMC Extension Slots - IEEE P1386/1386.1 LEDs 4 4 • 242 bytes non-volatile CMOS RAM • One high bandwidth 64-bit/up to 133 MHz PMC USB 2.0 1-5 1 2-5 interface and one 32-bit/33 MHz PMC interface EEPROM • Enhancement to processor PMC standard • 512 kbit serial EEPROMs for non-volatile user data IDE primary - 4 VITA 32-2003 (non-monarch) Floppy IDE secondary onboard - • Cardbus adapter available on PMC2 • One channel 3.5“ floppy drive controller Floppy - 4 USB 2.0 - ICH4 Watchdog (user programmable) • One USB 2.0 connector at front COM 1-2 1 1, 2 • Watchdog 1: 4.8 µs to 76 sec, 0.6 sec increments • Four universal serial bus channels at rear • Watchdog 2: 1 min to 255 min, 1 min increments LPT - 4 ® ™ VGA and LCD - NVIDIA GeForce 4 420 Go Timer GPIO (8 pins) - 4 CP9 board version 2.x only • Integrated in E7501/ICH4 chipset • 256-bit 3D and 2D graphics accelerator PMC 1 (64-bit/up to 133 MHz) 4 4 • On-chip 32 MB frame buffer (66-190 MHz) Temperature Sensors 3 PMC 2 (32-bit/33 MHz) 4 4 • 32-bit/33 MHz PCI interface • CPU die and heatsink temperature software read- 1. Rear DVI-I connector for DVI and VGA • Dual CRTC/Simultaneous Dual Display able from -65°C to +127°C 2. Either front or rear as an order option • 350 MHz Palette-DAC for analog VGA ® CP9 High Performance 6U CompactPCI Embedded Computer Styles Power Allowances - PMC slot • +5 V, +3.3 V: Total power max. 7.5 W Non-RoHS C I • ±12 V; 100 mA each RoHS 1 3 Mechanical - PICMG 2.0 Front panel yes yes • 6U, 2 slot wide Front stiffener no no • 233 x 160 x 40 mm (including flash drive) or hard disk Middle stiffener no no Temperature Wedge locks no no • Note: For detailed information about the operating Parts soldered yes yes temperature behavior of any style board it is absolutely necessary to consult the manual. The Li-battery yes yes processor type and speed, altitude, the use or not of Entended tempeerature no yes Ethernet and video, ambient conditions and the type Conformal coating no no of cooling influences the board temperature range. • All values under typical conditions without a PMC Conduction cooled no no module. Power Requirements Operating Storage • +5 V, +3.3 V Required • ±12 V Only if required by mounted PMC module Standard 0 °C to +70 °C -40 °C to +85 °C Extended -40 °C to +85 °C -40 °C to +85 °C Power Consumption - typical operating current • Without keyboard, hard disk, modules, Ethernet (no Operating Storage link), measured at DOS prompt, no power savings. Humidity 5 - 95% @ 40°C 5 - 95% @ 40°C Altitude 15,000 ft. (4.5 km) 40,000 ft. (12 km) Processor, Memory 5 V 3.3 V Total Power 1 GHz, 1 GB 1.0 A 5.9 A 24.5 W Shock (3 axis, up & down, 5 hits/direction) 1.3 GHz, 1 GB 2.2 A 5.9 A 30.5 W • Style (C, I, 1, 3): 12g/6 ms, 1.4 GHz, 2 GB 1.4 A 5.9 A 26.5 W 1.6 GHz, 2 GB 2.7 A 5.9 A 33.0 W Vibration (30 minutes each axis) • Style (C, I, 1, 3): 2g rms @ 5 to 100 Hz 1.8 GHz, 2 GB 2.5 A 5.9 A 32.0 W • Without keyboard, hard disk, modules, Windows XP, MTBF 3D graphics active. Both Gigabit Ethernet channels • Calculations are available in accordance with linked, CPU running at instruction mix for maximum MIL-HDBK-217. power consumption. Please contact GE Intelligent Platforms. Processor, Memory 5 V 3.3 V Total Power Safety • Designed to meet standard UL1950, CE 1 GHz, 1 GB 1.3 A 7.5 A 31.3 W class A, FCC-A 1.3 GHz, 1 GB 4.6 A 7.5 A 47.8 W 1.4 GHz, 2 GB 2.7 A 7.5 A 38.3 W 1.6 GHz, 2 GB 5.4 A 7.5 A 51.8 W 1.8 GHz, 2 GB 4.8 A 7.5 A 48.8 W ® CP9 High Performance 6U CompactPCI Embedded Computer Block Diagram IPMI Pentium M Processor DDR SDRAM E7501 with ECC 2 GB SMBus EIDE P64H2 USB ICH4 PCI 64-bit/66 MHz PCI LPC 64-bit/ 133 MHz Super I/O Hot Swap PCI/PCI PMC1 Gigabit Bridge PCI 32-bit/33 MHz Ethernet 1 Gigabit Ethernet 1 VGA PMC2 cPCIbus 64-bit/66 MHz Ordering Information Hardware Accessories CTM12 I/O transition module for 6U backplane (IEEE 1101.11-1998 compliant) SCM184TL00C 1U 19” chassis with 2 cPCI slots, backplane and power supply SCC784UE05CP9 CP9 starter cage, 19”, 7U, 84HP, 5 cPCI slots, fans, HDD and DVD ZKAAPS2SPLIT Cable for keyboard and mouse on front panel Operating Systems Extensive operating systems support is available. Chassis with power supplies, backplanes and drives on request. For detailed information and further options, contact GE Intelligent Platforms. GE Intelligent Platforms Contact Information Americas: 1 800 433 2682 or 1 434 978 5100 Global regional phone numbers are listed by location on our web site at www.ge-ip.com/contact www.ge-ip.com ©2010 GE Intelligent Platforms, Inc. All rights reserved. All other brands or names are property of their respective holders. Specifications are subject to change without notice. 01.10 GFA-1105A