723-001 - GAI-TRONICS

Description

Gai-Tronics 723-001 Amplifier - Remote Handset Speaker Amp

Part Number

723-001

Price

Request Quote

Manufacturer

GAI-TRONICS

Lead Time

Request Quote

Category

PRODUCTS - 7

Specifications

Amplifier sensitivity

0.5 V ac, at rated output

Approval

NRTL certified for use in US and Canada:Class I, Div. 2, Groups A, B, C, D, when mounted into a certified GAI-Tronics Model 7245 Amplifier Enclosure

Construction/Finish

16-gauge cold-rolled steel/gray polyurethane enamel

Controls

Microphone gain, receiver volume, and sidetone (adjusted through the access holes on rear surface of unit)
Speaker volume (adjusted through the access hole behind nameplate on the front panel)

Dimensions (HxWxD)

8.1" x 8.1" x 3" (206 x 206 x 76 mm) behind panel/3.5" (D) (89 mm) in front of panel

Distortion

1% max. THD @ 1,000 Hz, 12 watts
1.5% maximum THD @ 1,000 Hz

Frequency response

250-4,000 Hz, +0/-3 dB ref. to 1 kHz
250-4,000 Hz, +0/-3 dB ref. to 1 kHz (below AGC)

Gain

55 dB nominal (below limiter level); adjustable from 40 to 63 dB

Handset Amplifier Output level

1.5 VRMS nominal into 33-ohm load

Input impedance

50,000 ohms nominal

Output limiter

1.5 VRMS nominal

Power consumed

Zero signal:10.5 VA, 5.3 W; Maximum signal:58 VA, 29.5 W

Power input

90-140 V ac range, 50/60 Hz, 120 V ac nominal

Speaker Amplifier Output

Push-pull, Class B, 12 watts min., with nominal supply voltage

Temperature range

-22º F to +158º F (-30º C to +70º C)

Weight

Net:4.4 lbs. (2.0 kg); Shipping:5.4 lbs. (2.4 kg)

Datasheet

Gai-Tronics=723-001=datasheet1-2032604657.pdf

55 KiB

Download

Extracted Text

Pub. 42004-145DDS GAI-TRONICS® CORPORATION A HUBBELL COMPANY 723-001 Remote Handset/Speaker Amplifier General Information This data sheet applies to the 723-001 Remote Handset/Speaker Amplifier, which is used with GAI- Tronics desktop, desk-edge, and flush-mount stations. It has been designed to be remotely mounted within an enclosure, allowing the associated subsets to be placed on a desktop, mounted on the side of a desk, or to be flush-mounted. Figure 1. Typical Installation of the 723-001 Remote Handset/Speaker Amplifier GAI-Tronics Corporation 400 E. Wyomissing Ave. Mohnton, PA 19540 USA 610-777-1374 800-492-1212 Fax: 610-796-5954 VISIT WWW.GAI-TRONICS.COM FOR PRODUCT LITERATURE AND MANUALS Pub. 42004-145DDS 723-001 Remote Handset/Speaker Amplifier Page: 2 of 2 Specifications Power input ....................................................................... 90-140 V ac range, 50/60 Hz, 120 V ac nominal Power consumed ................................................................................................Zero signal: 10.5 VA, 5.3 W Maximum signal: 58 VA, 29.5 W Construction/Finish.................................................... 16-gauge cold-rolled steel/gray polyurethane enamel Handset Amplifier Output level ..................................................................................... 1.5 V nominal into 33-ohm load RMS Output limiter .............................................................................................................. 1.5 V nominal RMS Gain ................................................. 55 dB nominal (below limiter level); adjustable from 40 to 63 dB Frequency response ............................................... 250-4,000 Hz, +0/-3 dB ref. to 1 kHz (below AGC) Distortion.......................................................................................... 1.5% maximum THD @ 1,000 Hz Controls ....................................................................... Microphone gain, receiver volume, and sidetone (adjusted through the access holes on rear surface of unit) Speaker Amplifier Output.................................................. Push-pull, Class B, 12 watts min., with nominal supply voltage Amplifier sensitivity.......................................................................................... 0.5 V ac, at rated output Frequency response ...................................................................... 250-4,000 Hz, +0/-3 dB ref. to 1 kHz Distortion...................................................................................... 1% max. THD @ 1,000 Hz, 12 watts Input impedance .................................................................................................... 50,000 ohms nominal Controls .................................................................... Speaker volume (adjusted through the access hole behind nameplate on the front panel) Temperature range ................................................................................ -22º F to +158º F (-30º C to +70º C) Dimensions .............................................. 8.1 H × 8.1 W × 3 D inches (206 × 206 × 76 mm) behind panel/ 3.5 D inches (89 mm) in front of panel Net weight..............................................................................................................................4.4 lbs. (2.0 kg) Shipping weight .....................................................................................................................5.4 lbs. (2.4 kg) Approval ..........NRTL certified for use in US and Canada.................... Class I, Div. 2, Groups A, B, C, D, when mounted into a certified GAI-Tronics Model 7245 Amplifier Enclosure f:\standard ioms - current release\data sheets\42004-145d\42004-145dds.doc 07/09

Frequently asked questions

At GID Industrial (Elite.Parts' parent company), we specialize in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

Warranties differ by part and by which suppliers we use to procure it for you. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Elite.Parts can ship via FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Absolutely! We are happy to serve customers regardless of location. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

All major credit cards are accepted: Visa, MasterCard, Discover, and American Express. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products