NEW! Finisar Fibre Channel Protocol Analysis Multi-user • Multi-channel  Multi-speed � Up to eight remote users � Network from anywhere over the Internet � Operates at single-, double-, and mixed-rate Fibre Channel link rates. Remote User 1 Finisar GTX-RX SAN arge Storage Area Networks are being installed worldwide. Mon- itoring the performance of and troubleshooting these sophisti- Lcated storage systems requires powerful instrumentation oper- ated by engineers trained in the complexities of Fibre Channel. Whether the SAN is in the lab or anywhere around the world, the new Finisar GTX-RX family of Fibre Channel Protocol Analyzers allows you and your colleagues to monitor and debug SANs from your office over the Internet. The GTX-RX supports eight time-correlated two-channel protocol ana- lyzers. A massive 8 Gbyte trace memory (optional 16 Gbytes) insures that all traffic around a problem is captured. Optional GTX- SANMetrics performance analysis software will help identify and resolve performance-related problems in a SAN fabric or loop. The GTX-RX Protocol Analysis System is compatible with the full Remote User 2 range of Finisar Fibre Channel Instruments. Add Error Injection, Bit Error Rate Testing, and SANmark Data Generation to build sophisti- cated test systems. Finisar Corporation• 1308 Moffett Park Drive, Sunnyvale, CA 94089-1133 (408) 548-1000 FAX (408) 541-6138 Email: sales@finisar.com  Website: www.finisar.com Internet GTX TraceView with Multi-Analyzer Systems Configurable to meet any measurement need. The GTX TraceView data presentation and analysis software for the GTX Fibre Channel Protocol Analyzer family is easily configurable to meet any data presenta- tion need. Define columns with one or more protocol parameters. Make columns with multiple parameters. Move them around. Filter them for specific information. Restrict them to show only certain protocol analyzer ports. Color the text and back- ground to highlight events or channels. Configuring the viewer with simple mouse clicks. Save your configuration for later use. Below is an example of one possible 16-port multi-analyzer display. Columns show traffic by analyzer port plus information about the embedded SCSI commands. Create new columns, add parameters, filter by port with a simple pulldown. Color text by port and contents. Bookmark events for easy identification. Color backgrounds by port for easy tracking. Add vertical and horizontal lines to improve readability. Define one or more time columns. Time formats include linear and delta between events. Histogram shows data density by port. For more information on the range of features available in TraceView, see the GTX-TraceView data sheet. FEB2000 MMI0130