+NTELLIGENT SOLUTION P-250+B Paint Robot FANUC ROBOTICS’ P-250+B IS THE MOST FLEXIBLE AND ADVANCED SIX-AXIS PAINT ROBOT AVAILABLE ON THE MARKET. THE P-250+B IS ADAPTABLE IN ITS MOUNTING CONFIGURATION TO ACCOMMODATE THE MOST DEMANDING OF PAINTING APPLICATIONS. THE “OPEN ARCHITECTURE” DESIGN ALLOWS THE USE OF STANDARD FANUC ROBOTICS INTEGRATED PROCESS EQUIPMENT OR STREAMLINES EASY INTEGRATION OF 3RD PARTY APPLICATION EQUIPMENT. THE OPTIONAL ON-ARM PNEUMATIC ENCLOSURE PROVIDES THE ABILITY TO MOUNT FANUC ROBOTICS’ APPROVED COMPONENTS CRUCIAL TO OVERALL PERFORMANCE AND PAINT QUALITY WITHIN THE INNER ARM.   PROCESS ADVANTAGES: • Integral Process Control (1K/2K gear pumps), 1K closed-loop flow control, and Integrated Canister System (direct charge waterborne) automatically maintain programmed flow rates, providing consistent material delivery and high finish quality • Ability to package process components in the inner-arm in close proximity to the applicator for rapid, accurate, and consistent application performance P-250+B floor mount • Single or dual-arm controller configurations available • Standard integrated diagnostic and reporting capabilities • “Flip-Over” capability provides the industry’s largest work envelope • Balanced arm design provides excellent near reach & stroke length SOFTWARE ADVANTAGES: • PaintTOOL software provides the industry’s most powerful and easy-to-use programming interface • Dual Check Safety enables smaller booths and lower system costs • Collision Guard protects application equipment • AutoFlowChecker detects fluid delivery system problems in real-time • Built-in process parameter diagnostic monitoring and reporting provides integrated   P-250+B wall mount real-time strip chart capability • Supports all major network communication protocols • ROBOGUIDE PaintPRO Offline 3D programming • Supports both +Pendant color graphical teach pendant and standard intrinsically-safe teach pendant FEATURES AND BENEFITS: • Floor, wall, ceiling, and shelf mount configurations • Easily configured left hand or right hand arm to maintain symmetry across the booth • Standard process hose routing and management • Options for single or dual integrated process axis motors on the outer arm • Optional plastic (non-conductive) arm and wrist available • Designed for ease of maintenance and easy access to all critical components • High arm and wrist payload design supports a variety of applications including rotary atomizers, conventional and electrostatic spray guns and multi-gun configurations • Flexible and customizable mounting structures for optimal spraybooth integration P-250+B plastic arm + n t e l l i g e n t R O B O T s o l u t i o n s Floor, Wall, Ceiling, and Shelf Mount P-250+B Paint Robot     Wrist   Wrist   Figure 1   P-250+B SPECIFICATIONS: Item Specification Note   6 robot Process axes located on outer Controlled axes 2 process (optional) arm for pump, canister, etc. Installation Floor, ceiling, wall, shelf J1 320º, 160º /s 100º /s wall mounted J2 280º, 160º /s - J3 330º, 160º /s - Floor Mount* Motion range J4 1080º, 375º /s 550º /s option** Floor   Wall   Wrist   & speed J5 1080º, 430º /s 550º /s option** Mount   Mount   J6 1080º, 545º /s 710º /s option** J7 Modular length, (rail) 1500 mm/s Floor   300mm axial faceplate offset Wrist 15 kg Wall   50mm radial faceplate offset Mount   Mount   Payload Outer 15 kg arm capacity Inner 15 kg arm Drive method Electric servo drive by AC servo motor Repeatability ± 0.2 mm Robot weight 530 kg 500 kg with wall mount base Class l, ll, lll Div. l Group C, D, E, F,G Hazardous location ATEX CE ll 2 G c Ex ib px llB T4 Ta=0°C to +45°C certification (pending) ATEX CE ll 2 D c Ex pD 21 T135°C Ta=0°C to +45°C *Work envelope generated with point identified in figure 1 Floor   Wall Mount* Reach measured to wrist faceplate is 82 mm larger Wall   Mount   Mount   **High speed wrist option FANUC ROBOTICS AMERICA 3900 WEST HAMLIN ROAD ROCHESTER HILLS MI 48309-3253 MARKETING@FANUCROBOTICS.COM FANUCROBOTICS.COM 1-800-+Q-ROBOT © 2011 FANUC Robotics America Corporation. All Rights Reserved. FANUC ROBOTICS LITHO IN U.S.A. FRA - 05/11