EXTREME NETWORKS 53021

Description
901037-00/53021, BD 6800 2PT SONET/SDH OC-12C/STM-4 POS SMF MOD
Part Number
53021
Price
Request Quote
Manufacturer
EXTREME NETWORKS
Lead Time
Request Quote
Category
BLACK DIAMOND
Datasheet
Extracted Text
SPEC SHEET OC-12c Packet-over-SONET/SDH Optical Services Module Product Description The BlackDiamond 6800 series platform equipped with the 4-port OC-3c packet-over-SONET/SDH module offers service providers proven high-performance capabilities, scalability and traffic throughput relief. The OC-3c module supports the Ethernet over SONET/SDH protocol (RFC 2878), empowering service providers to extend the simplicity, scalability and cost effectiveness of Ethernet over traditional SONET/SDH networks in a transparent manner, without the need for protocol termination and/or translation and with absolutely no disruption in services. Key Features • Supports SONET and SDH standards • Low Latency (14 ms) SONET Automatic Protection • Switching (APS) and SDH Multiplex Section Protection (MSP) • Point-to-Point Protocol (PPP, RFC 2615) for link control • Native Ethernet over SONET/SDH (RFC 2878) • Native IP over SONET/SDH (RFC 1332) • Netflow Version 1, up to 2 million flows per module with filtering capability on a per flow and per aggregate basis • Bi-directional rate shaping capability • Enhanced QoS services (802.1p mapping/replacement, 802.1Q mapping/nesting, DiffServ Code Point mapping/replacements, support for Per Hop Behavior RFCs and egress WRED) • MPLS over SONET/SDH (support for MPLSCP with ability to recognize/use the MPLS encapsulation) Specifications ExtremeWare Requirement • APS/MSP • 6.1.8b12 IPSERV_2.1.75 or most recent IPSERV - ANSI T1.105.01-1998 – APS technology release version on OC-12 module and the - ITU-T G.783 - MSP BlackDiamond MSM module. MSM bootrom should be 7.0 (or higher) and OC-12 bootrom should be 1.14 Environmental Conditions (or higher). • Operating temperature: 0° to 40° C • Storage temperature: -40° to 70° C Module Connector Specifications • Operating relative humidity: 10% to 95%, noncondensing Module • Operating altitude: -200 to 15,000 ft (-60 to 4600 m) 53020 53021 • Storage altitude: 35,000 ft (11,000 m) (P12cMi) (P12cSi) • Mean Time Between Failure (MTBF): 208,579 hours Line Rate 622 Mbps 622 Mbps • Power consumption: 83W Fiber Type MMF SMF Connector Type SC SC Safety Compliance Power Budget (dBm) 10 15 • UL 1950 3rd Edition, Listed Tx Power (dBm) -20 (min), -14 (max) -15 (min), -8 (max) • EN60950:1992/A1-4:1997+ZB/ZC De viations • IEC 950CB Rx Sensitivity (dBm) -30 (min), -14 (max) -28 (min), -8 (max) • Low Voltage Directive (LVD) Max. Distance* 500 m 15 km • CSA 22.2#950-95 Wavelength 1300 nm 1300 nm • AS/NZS 3260 Distance Short Reach Intermediate Classification Reach EMI/EMC Compliance * Worst-case scenario considering fiber loss, connector • FCC CFR 47 part 15 Class A loss and splice loss • ICES-003A/C108.8-M1983 Class • VCCI Class A Transport Protocol Standards • AS/NZS 3548 • EN 55022 Class A • SONET/SDH • CISPR 22 Class A - GR-253-CORE - Bellcore SONET • EN 50082-1:1997 includes ENV 50204 - ANSI T1.105.02-1995, SONET Payload Mappings • EN 55024:1998 includes IEC 61000-4-2, 3, 4, 5, - ITU-T G.707 – SDH 6, 8, 11 - RFC 2558 – SONET/SDH MIB • Low Voltage Directive (LVD) Page 2 OC-12c Packet-over-SONET/SDH Optical Services Module LED Indicators Module: Status: green blinking (normal operation); amber blinking (error); off (no power) Diag: amber blinking (diagnostics in progress); amber (diagnostics failed); off (no diagnostics in progress) Port: Status: green (link up); green blinking (link disabled); amber blinking, returning to green (activity on link); amber blinking (link down, SONET/SDH link problem); off (no received signal) Ordering Information Product Product Number Name Description 53020 P12cMi 2-port SONET/SDH OC-12c/STM-4 PoS MMF Module 53021 P12cSi 2-port SONET/SDH OC-12c/STM-4 PoS SMF Module 3585 Monroe Street Santa Clara, CA 95051-1450 Phone 408.579.2800 Fax 408.579.3000 Email info@extremenetworks.com Web www.extremenetworks.com © 2001 Extreme Networks, Inc. All rights reserved. Extreme Networks, BlackDiamond, ExtremeWare, Extreme Turbodrive, Summit and ServiceWatch are registered trademarks of Extreme Networks, Inc. in certain jurisdictions. Alpine, ExtremeWare Vista, ExtremeWorks, ExtremeWorks Essentials, ExtremeAssist, ExtremeAssist1, ExtremeAssist2, PartnerAssist, Extreme Standby Router Protocol, ESRP, IP TDM, SmartRedundancy, SmartTraps, Summit1, Summit1i, Summit4, Summit4/FX, Summit5i, Summit7i, Summit24, Summit48, Summit48i, SummitLink, SummitGbX, SummitRPS, Extreme Velocity, Extreme Professional Services, vMAN, ExtremeViews, Extreme Ethernet Everywhere, Ethernet Everywhere, Go Purple, the BlackDiamond logo, the Alpine logo, the Summit logo, the ExtremeWorks logo and the Extreme Networks logo are trademarks of Extreme Networks, Inc., which may be registered or pending registration in certain jurisdictions. The Extreme Turbodrive logo is a service mark of Extreme Networks, Inc., which may be registered or pending registration in certain jurisdictions. All other registered trademarks, trademarks and service marks are property of their respective owners. Specifications are subject to change without notice. L-PS-ARM-106
Frequently asked questions
What makes Elite.Parts unique?

What kind of warranty will the 53021 have?

Which carriers does Elite.Parts work with?

Will Elite.Parts sell to me even though I live outside the USA?

I have a preferred payment method. Will Elite.Parts accept it?

What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods