Single Board Computers PMC Modules XPedite1000 XPedite1000 Applied Micro 440GX PowerPC Processor-Based PrPMC Module with Dual Gigabit Ethernet Applied Micro PowerPC 440GX 533-800 MHz processor 133-MHz PCI-X PrPMC and local bus interfaces Up to 512 MB SO-DIMM DDR-333 SDRAM Up to 144 MB soldered flash 512 kB socketed flash Two front panel Gigabit Ethernet ports Two front panel RS-232 serial ports XPedite1000 Front or rear I/O Integrated 256 kB SRAM The XPedite1000 is a high-performance Processor PMC (PrPMC). A PCI-X PMC interface or L2 cache provides the system designer with ample bandwidth for I/O intensive applications. Two front panel Ethernet ports provide a flexible I/O interface by auto-negotiating between 10, 100, Linux BSP and 1000 Mbps operation. Wind River VxWorks BSP The XPedite1000 utilizes the low-power Applied Micro PowerPC 440GX embedded processor. QNX Neutrino BSP With integrated PCI-X, DDR SDRAM, and Ethernet interfaces, the 440GX offers a highly optimized solution for packet processing and general computing applications. The serial and Green Hills INTEGRITY Gigabit Ethernet interfaces are accessible either through the front panel or P14 I/O. A BSP SO-DIMM DDR SDRAM memory slot and socketed boot flash provide flexible field LynxOS BSP upgradeability. The XPedite1000 is ideal for PrPMC applications requiring low cost and power yet high bandwidth and processing performance. The 440GX processor dissipates only 4.5 W while operating at 667 Mhz and provides 1334 DMIPs of processing power. Extreme Engineering Solutions 3225 Deming Way, Suite 120 • Middleton, WI 53562 ...Always Fast Phone: 608.833.1155 • Fax: 608.827.6171 sales@xes-inc.com • http://www.xes-inc.com DS90010020-D www.xes-inc.com Technical Specifications XPedite1000 Processor DDR SDRAM Software • Applied Micro PowerPC 440GX • SO-DIMM slot • Linux BSP • 800 MHz max processor speed • Up to 512 MB at up to 333 MHz • Wind River VxWorks BSP • 133 MHz PCI-X interface • 2.6 Gbps peak bandwidth • QNX Neutrino BSP • 32 kB L1 instruction/data caches • Green Hills INTEGRITY BSP Front Panel I/O • 256 kB L2 cache/SRAM • LynxOS BSP • DDR-333 SDRAM interface • Ethernet, I²C, and RTC drivers • Two Gigabit Ethernet ports • Two Gigabit Ethernet controllers • One RS-232 serial port Physical Characteristics • Two I²C controllers • Link and activity LEDS • PMC form factor Non-Volatile Storage Rear I/O • Dimensions: 149 mm x 74 mm • Up to 144 MB surface mount flash • 10 mm stacking height • Two Gigabit Ethernet ports • 512 kB socketed flash • One RS-232 serial port Environmental Requirements • 512 bytes SEEPROM • One I²C port Contact factory for appropriate board configuration Ethernet RTC based on environmental requirements. • Auto-negotiates between 10/100/1000 Mbps • M41T00 I²C timekeeper • Supported ruggedization levels (see chart below): • Front panel/rear I/O • 60-hour clock retention 1, 3, 5 • Conformal coating available as an ordering option Power Requirements (Estimate) • 3.3V, 2.16 A, 7.13 W Supported Ruggedization Level Level 1 Level 3 Level 5 Cooling Method Standard Air-Cooled Rugged Air-Cooled Conduction-Cooled Operating Temperature 0 to +55 °C ambient (300 LFM) -40 to +70 °C (600 LFM) -40 to +85 °C (board rail surface) Storage Temperature 0 to +85 °C ambient -40 to +105 °C ambient -55 to +105 °C ambient Vibration 0.002 g²/Hz, 5 to 2000 Hz 0.04 g²/Hz (maximum), 5 to 2000 Hz 0.1 g²/Hz (maximum), 5 to 2000 Hz Shock 20 g, 11 ms sawtooth 30 g, 11 ms sawtooth 40 g, 11 ms sawtooth Humidity 0% to 95% non-condensing 0% to 95% non-condensing 0% to 95% non-condensing RS-232 Transceiver Gigabit Magnetics Ethernet PHY (440GXonly) Gigabit Magnetics Ethernet PHY Flash AppliedMicro Transceiver 440/440GX Processor SO-DIMM PCI-X DDR I²C Real Time SEEPROM Clock XPedite1000 Copyright © 2009 Extreme Engineering Solutions, Inc. (X-ES). All rights reserved. www.xes-inc.com Specifications are subject to change without notice. All trademarks are property of their respective owners. ETH ETH Serial P11 P13 P12 P14