Tested Tough In the Field When the U.S. Environmental Protection Agency responded to the Gulf of Mexico oil spill, ® ® PH100 ExStik RE300 ExStik ExStik dissolved oxygen pH Meters ORP Meter meters were there helping to ensure marine life was Flat Surface electrode High resolution of 1mV provides on-the-spot pH not threatened. • Measures ORP/Redox measurements from -999 to 999mV • RENEW feature tells you • Automatic electronic when it’s time to replace self calibration your pH electrode • Simulated analog bargraph • CAL feature tells you when it’s displays change in ORP reading time to recalibrate your meter • Memory stores 15 labeled data • Flat Surface pH electrode • Waterproof to IP57 protects rugged design measures pH on meter from wet environment solid and semi-solid surfaces • Complete with fl at surface ORP • Analog bargraph originates at ACCESSORIES electrode, protective sensor neutral point (pH 7.00) to view cap, sample cup with cap, four EC-84-P 84μS Conductivity Standard (2 bottles/1 pint ea) trends in acidity or alkalinity 3V CR2032 button batteries EC-1413-P 1413μS Conductivity Standard (2 bottles/1 pint ea) • 1, 2 or 3 point calibration and 48" (1.2m) neckstrap EC-12880-P 12880μS Conductivity Standard (2 bottles/1 pint ea) (order pH buffers separately) PH103 Tripak Buffer pouches • ATC plus measures ® PH105 pH ExStik Electrode Module Temperature ® RE305 ORP ExStik Electrode Module • Memory stores 15 labeled data ® EC405* ExStik II Conductivity Cell Module for EC400 • Waterproof to IP57 protects ® EC505* ExStik II pH/Conductivity Cell Module for EC500 meter from wet environment ® DO605* ExStik II Dissolved Oxygen Module for DO600 • Includes fl at surface pH DO603 Membrane Kit for DO600/DO605 electrode, sensor cap, ® FL705* ExStik II Fluoride Module for FL700 sample cup with cap, four FL704 TISAB reagent tablets for FL700 (100 tablets) 3V CR2032 button batteries EX010 3ft (1m) Extension Cable w/Probe Guard/Weight and 48" (1.2m) neckstrap EX050 16ft (5m) Extension Cable w/Probe Guard/Weight CA895 Small vinyl carrying case with belt loop CA904 Large hard case for meter and accessories SPECIFICATIONS PH100 RE300 pH 0.00 to 14.00pH — ORP (mV) — -999 to 999mV Conductivity — — TDS/Salinity/Fluoride — — ® DO saturation/concentration — — *ExStik II electrode modules are not interchangeable with Temperature 23° to 194°F (-5 to 90°C) — ® ExStik pH/ORP/Chlorine meters Max. Resolution 0.01pH, 0.1° 1mV Basic Accuracy ±0.01pH, ±1.8°F/1°C ±4mV Dimensions 1.4x6.8x1.6" (35.6x172.7x40.6mm) 1.4x6.8x1.6" (35.6x172.7x40.6mm) All models are CE approved Weight 3.8oz (110g) 3.8oz (110g) 1yr (meter)/6mo conditional warranty (electrode) 1yr (meter)/6mo conditional warranty (electrode) Warranty 132 132 � Indicates products that are available with optional calibration traceable to NIST. See page 144 for a complete listing. WATER QUALITY METERS