Dissolved Oxygen Meters DO700 Waterproof Series Dissolved Oxygen Kit 8-in-1 Meter — Measures DO concentration/saturation, pH, mV, Conductivity, TDS, Salinity, Resistivity and Temperature • Automatic salinity compensation and manual barometric pressure compensation for DO measurements • Waterproof housing (meets IP57) design and large blue backlit dual LCD display • Choice of 3 point pH calibration for better accuracy; Automatic Temperature Compensation • One point Conductivity calibration − automatically recognizes 8 calibration solutions • Memory stores up to 400 labeled readings • Auto power off with disable function • 1 year warranty (meter)/ 6 months conditional warranty (electrode) • Complete with Dissolved Oxygen probe with 3 membrane caps and DO internal fi ll solution (30mL), pH/mV/Temperature electrode, polymer Conductivity cell, pH calibration solutions (4, 7, and 10pH), Conductivity calibration solution (1413μS), 2 AA batteries, and hard carrying case SPECIFICATIONS RANGE RESOLUTION BASIC ACCURACY Dissolved Oxygen (Concentration) 0 to 40.00mg/L 0.01mg/L ±1.5%FS Dissolved Oxygen (Saturation) 0 to 200.0% 0.1% ±1.5%FS pH -2.00 to 19.99pH 0.01pH ±0.02pH mV -1999 to + 1999mV 1mV ±0.15mV Conductivity 0.00 to 199.9mS 0.01μS ±1.5%FS TDS 0 to 100g/L 0.01mg/L ±1.5%FS Salinity 0 to 100ppt 0.01ppt ±1.5%FS Resistivity 0 to 100MΩ cm 0.1Ω ±1.5%FS Temperature (for pH & mV) 32 to 212°F (0 to 100°C) 0.1° ±1°F/±0.5°C Read to use complete Temperature (other) 32 to 122°F (0 to 50°C) 0.1° ±1°F/±0.5°C kit includes all the Dimensions/Weight 4.7x2.6x1.2" (120x65x31mm)/ 6.3oz (180g) necessary accessories stored in a hard case for easy transportation. ORDERING Ideal for fi eld use. DO700 Waterproof Series Dissolved Oxygen Kit DO705 Dissolved Oxygen Electrode DO703 Replacement Membrane Caps (3 caps) PH305 Spare pH/mV/Temperature Electrode EC605 Spare Polymer Conductivity Cell ® DO600 ExStik II Dissolved Oxygen Meter Waterproof stick meter with Bonded Membrane Caps • Simultaneous display of DO and Temperature plus analog bargraph to view trends • Memory stores up to 25 data readings • Oxygen level displayed as % Saturation or Concentration (mg/L); ATC • Adjustable Altitude Compensation (0 to 20,000ft in 1,000ft increments) • Adjustable Salinity Compensation from 0 to 50ppt Bonded membrane cap for • Data Hold, Auto power off and low battery indicator easy replacement. DO603 • Optional 3ft (1m) or 16ft (5m) Extension Cable for remote measurements Membrane Kit includes 6 • Complete with DO electrode, protective sensor cap, spare membrane cap, screw on membrane caps, 15mL fi lling solution and electrolyte, sample cup with cap, four 3V CR2032 batteries, and 48" (1.2m) polishing paper. neckstrap; 1 year warranty (meter)/ 6 months conditional warranty (electrode) SPECIFICATIONS RANGE MAX RESOLUTION BASIC ACCURACY DO (saturation mode) 0 to 200.0% 0.1% ±2% FS DO (concentration mode) 0 to 20.00ppm (mg/L) 0.01ppm (mg/L) 0.4ppm (mg/L) Temperature 32 to 122°F (0 to 50°C) 0.1°F/°C ±1.8°F (1°C) Dimensions/Weight 1.4x6.9x1.6" (36x176x41mm)/ 3.8oz (110g) Choice of optional EX010 ORDERING 3ft (1m) or EX050 16ft (5m) ® DO600 ExStik II Dissolved Oxygen Meter extension cable with probe ® DO605 Spare ExStik II Dissolved Oxygen Electrode module weight. DO603 Membrane Kit for DO600 and DO605 EX010 Extension Cable 3ft (1m) with Probe Guard/Weight EX050 Extension Cable 16ft (5m) with Probe Guard/Weight For the name of your local distributor, visit www.extech.com or call 1-877-894-7440 143