ATX Power Supply support

On-board 4-pin ATX power supply header (requires the passive backplane supports ATX power supply) On-board power button header for Soft power off, i.e. front panel turn off system power. Support Win95 and Win98 shutdown automatically turn off the system power.

BIOS

Award BIOS, PnP support.FLASH EEPROM (256KB) for BIOS update. Enhanced ACPI BIOS and DMI 2.0. ISA Plug and Play (PnP) extension. Power management. Anti-Boot Virus

Chipset

VIA Twister-T and 82686B with PCI EIDE, Super-IO and RTC built-in.

Dimensions

7.28"(L) x 5.0"(W) or 185mm (L) x 127mm (W)

DMI BIOS Support

Desktop Management Interface (DMI) allows users to download system hardware-level information such as CPU type, CPU speed, internal/external frequencies and memory size.

Enhanced IDE

Two EIDE interfaces for up to four devices, support PIO Mode 3/4 or Ultra DMA/33/66 IDE Hard Disk, ATAPI CD-ROM, DOM and LS-120 drive

FDD Interface

Two floppy drives (360KB, 720KB, 1.2MB, 1.44MB, 2.88MB)

Green unction

Power management via BIOS, activated through mouse/keyboard movement or SMI button

Hardware Monitor System

PC Health Monitoring ASIC supports system power voltages, FAN speed and system temperatures monitoring. One FAN connector and one thermal couple header reserved for chassis FAN and temperature monitoring.

Humidity

5% to 95%

IrDA Interface

Pin-header connector for the optional IrDA external connector

Keyboard Mouse Connectors

One 6-pin mini-DIN connector is located on the mounting bracket for easy connection to a keyboard and PS/2 mouse. A 5-pin on-board pin-header is also available to support PS2 mouse.

Memory Sockets

One 168-pin DIMM socket Memory types: 3.3V SDRAM (Synchronous DRAM) support 8MB to 512MB memory capacity. Both ECC and non-ECC Memory module are supported. NOTE: Only SDRAM modules that support SPD (Serial Presence Detect) should be use. Use PC133 modules when running 133MHz Memory bus speed and use PC133/PC100 modules when running133MHz memory bus speed.

MPEG-2 video textures

Extensive LCD Support, includes 36-bit DSTN/TFT flat panel interface with 256 gray shade support, one 110 MHz LVDS interface, Support for all resolutions up to 1600x1200, Panel power sequencing, Hardware Suspend/Standby control. Drivers for major operating systems and APIs: [Windows 9x, Windows NT 4.0, Windows 2000, Direct3D, DirectDraw and DirectShow, OpenGL ICD for Windows 9x, NT, and 2000]

Parallel Port

One high-speed parallel port, SPP/EPP/ECP mode.

PISA Compliance

Fully compliant to PISA Rev 1.7 specification.

Power Supply

5A@ +5v typical; 300mA@ +12v typical 100mA@ -12V typical; 200mA@ +5VSTB (Option)

Processor

Intel FC-PGA/FC-PGA2 Pentium III 600/650/667/750/800/850/866/933/1000/1113MHz/1.2G/1.4G and above (100MHz FSB or 133 MHz FSB). Intel Celeron Processor 533/566/600/633/337/700/733/766/800/850/900/1000/1200MHz and above (66MHz FSB or 100MHz FSB). VIA C3 Processor 700/766/800/866/933 MHz and above (66M/100M/133MHz FSB). Intel latest Tualatin and VIA C3 low power processors are supported.
VIA C3

Processor Socket

Socket370 for FC-PGA and FC-PGA2 CPU.

S3 Savage4

VIA 8606 integrates S3 Savage4 2D/3D/Video accelerator. Optimized Shared Memory Architecture (SMA). 8 / 16 / 32 MB frame buffer using system memory, selected by user through BIOS setup. High quality DVD video playback. 2D/3D resolutions up to 1920x1440. Motion compensation for full speed DVD playback and

Secondary Cache

512K(Tualatin), 256K(Coopermine) or 128KB(Celeron) L2 cache integrated in CPU and runs on CPU core frequency.

Serial Port

Four 16550 UART compatible ports with COM1, COM2 and COM3 as RS232. COM4 can be RS-232/422/485.

Temperature

0?C to 60?C operating; -40?C to 70?C storage

USB Interface

Two USB ports interfaced with one 2x5 pin-header, compliant with USB Specification Rev. 1.1 and support USB Hot-Plug function.

Watchdog Timer

Read I/O port 0443H to enable watchdog. Read I/O port 043H to disable watchdog. 10s, 20s, 30s and 80s timeout period selectable.