50 WATT
AC-DC
CONVERTER
SVB-SB SERIES
Specifications Model
SVB**SB
SVB05SB SVB12SB SVB15SB SVB24SB SVB48SB
50WATTS/SINGLE
Input Characteristic
Input Voltage AC200V
Input Range AC170-264V(DC220-350V)
Input Frequency 50/60Hz
Input Frequency Range 47-440Hz
Phase Single
Inrush Current *1 30A(maximum)at AC200V
Derating Curve
Efficiency Curve
OCP Curve
ETA-USA Tel: 408-778-2793 Fax: 408-779-2753 e-mail: sales@eta-usa.com
SVB**SB Specification
Specifications M odel
SVB**SB
SVB05SB SVB12SB SVB15SB SVB24SB SVB48SB
50W ATTS/SINGLE
Output Characteristic
O utput Voltage [V] 5 12 15 24 48
O utput Current [A] 10.0 4.3 3.4 2.5 1.1
Voltage Adjust Range +/- 10% of Rated O utput Voltage(at no load within the input range)
Ripple and Noise [m Vp-p](m axim um ) *3 150 220 250 340 580
Regulation
a.Statistic Line Regulation [mV](m axim um) 40 96 120 192 384
45 108 135 216 432
b.Statistic Load Regulation [m V](m axim um )
c.Temperature Coefficient *4 0.03%/℃
d.Drift[mV](maximum) *5 40 75 90 135 255
e.Dynam ic Load Regulation [m V](typical) *6 150 360 450 720 1440
f.Recovery Time *6 0.3mS(typical)
Rise up time 500mS(maximum) at 25℃ and rated input/output
Hold up time 20mS(minimum) at 25℃ and rated input/output
Functions
O vercurrent Protection Current Limiting with automatic recovery
≧ 110% of Rated O utput Current[A]
11.04.733.742.751.21
O vervoltage Protection output shutdown(to reset,leave 1minute after shut-off)
≧
110% of Rated O utput Voltage[V] 5.50 13.2 16.5 26.4 52.8
Remote Sense not available
Remote On/O ff not available
Environmental
O perating Temperature 0 to +50℃
O perating Humidity 85%RH(non-condensing)
Storage Temperature -20 to +85℃
Storage Humidity 85%RH(non-condensing)
W ithstanding Voltage
Primary-Secondary AC2,500V for 1minute
Primary-Frame G round AC2,500V for 1minute
Secondary-Frame Ground AC500V for 1minute
Isolation Resistance Primary-Secondary-Frame G round 50MΩ(minimum) by DC500V insulation
2
5-10Hz:10m m double am plitude,10-55Hz:19.6m /s ,20m inutes' period for 60m inutes each along X,Y,Z
Vibration
axes(non-operating)
2
Shock 294m/s
Cooling Convection
? Leakage Current 1mA(maximum) at 25℃ ,rated input/output and rated input frequency
? Safety
? W eight (typical) 280g
? MTBF [H] 620,000
? Switching Frequency[kHz](typical) 130
Conditions:
*1 at cold start
*2 at DC260V input and rated output
*3 measured by a bayonet probe at output connector at 0 to 100MHz bandwidth
*4 at 0 to +50℃
*5 for 7hour period after 1hour warm-up at 25℃ and rated input/output
*6 when output current changed from 25% to 75% of rated output current rapidly at AC200V input
ETA-USA Tel: 408-778-2793 Fax: 408-779-2753 e-mail: sales@eta-usa.com
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods