1.5K W 85-264VAC ETJ-SX SERIES Model Output Efficiency ETJ02SX 2V 300A 80% ETJ3.3SX 3.3V 300A 80% ETJ05SX 5V 300A 80% ETJ12SX 12V 125A 80% ETJ24SX 24V 62A 80% ETJ28SX 28V 53A 80% ETJ48SX 48V 31A 80% DESCRIPTION ELECTRICAL SPECIFICATIONS INPUTS The Single Output ET series is our New Modular compact RANGE: Full input Range 85 to 264 VAC. converter product line providing up to 1500 watts of continuous FREQUENCY: 43 to 63Hz. reliable power at full load. This Single Output ET series is nearly INRUSH CURRENT: 25A peak for the first four AC cycles 40% smaller then the earlier industry standard, with a power HARMONIC CURRENT: <5% density up to 6 watts per cubic in. The single output units will HOLD UP TIME: At least 20msec from loss of input to loss of operate unattended and meet international safety and emissions regulation. standards. FEATURES OUTPUTS VOLTAGE: 2, 3.3, 5, 12, 15, 24, 28 and 48 VDC • Power Factor (>0.99) CURRENT: See Tables • 0 C to +50 C at full load ADJUSTMENT RANGE: +5 to –10% of nominal output voltage. • Standard 5” X 5” X 11.25” envelope POLARITY: Output is isolated. It may be referenced plus/minus as • Output Fully Floating required. • Overcurrent Protection REMOTE SENSING: Compensates for up to 0.5V total loop drop • Overvoltage Protection in the output line. • Remote Sense STATIC REGULATION: Line: +/- 0.25% over full line range. • Overtemperature Protection Load: Option: =/-% zero load to full load. Droop IFE: Option: • Self-contained Forced Air Cooling the output sags from +5% when the load is increased from 10% to 100%. • Meets UL, CSA and VDE Safety VOLTAGE STABILITY: +/-0.1% FOR 24 hour period after 30 • Meets EMI EN55022 Level A minute warm up. ISO9001 (1997) TEMP COEFFICIENT: +/-0.02%/ C FROM 0 c TO +50 c. For Wide Temperature. Option: +/- 0.035%/ C from –30 C to +70 C. P-P RIPPLE AND NOISE: 1% (20Hz to 50MHz Bandwidth). MINIMUM LOAD: Not Required. OPTIONS TURN ON DELAY: 1 sec. Max from application of AC line. OVER VOLTAGE PROTECTION: 125% +/-5% of nominal. OVP - Hot Pluggable - Diode Isolation shutdown is latched until the input line is removed for 5 secs and - Wide Temp Operation - Output Current monitor then reapplied. OVP sensing is don at the output terminals. - Power Fall Signal OVERCURRENT PROTECTION: Current Limit Point: 110% to - Logic Inhibit 120% of full load. - Single Wire Current Sharing SHORT CIRCUIT CURRENT: Foldback type 40% to 80% of full - Power Good Single rated current. Unit will recover when overload is removed. ETA-USA Tel: 408-778-2793 Fax: 408-779-2753 e-mail: sales@eta-usa.com ETJ-SX SERIES ENVIRONMENTAL OVERTEMPERATURE PROTECTION: Automatically shuts down and latches the unit in the event of Non-Operating: From 5 to 17Hz, 0.01” double amplitude: from an over temperature condition. After cool down, power must be 17 to 500Hz, 1.5G peak: 3 axes, 5min/octave sweep, dwell 1 recycled to restart the unit. min at resonance. AUDIBLE NOISE: 63 dBA max at 1 meter. 70 dBA for high MTBF: 500,000 hours speed fans. (See Output Tables for units with high speed fan). SHOCK: Operating: 5G, half sine, 11msec 3 axes. Non- TEMPERATURE: Standard: 0 C to +50 C at full load. Storage: Operating: 15G half sine, 11 msec, 3 axes. -55 C to +85 C. COOLING: Forced air, internal fan Airflow normally exits at HUMIDITY: 20% to 95% non-condensing. connector. ALTITUDE: Operating: 8,000 Ft. Derates to 90% at 10,000 Ft. EMI: Conducted & Radiated EN55022 level A Non-Operating at 30,000 feet. SAFETY: Meets UL1950 , CSA1950, and TUV EN60950. VIBRATION: Operating: From 5 to 27Hz, 0.02” double amplitude: from 27 to 500Hz, 0.75G, 3 Axes, 5 min/octave sweep, dwell 1 min at resonance. DIMENSIONS: ETA-USA Tel: 408-778-2793 Fax: 408-779-2753 e-mail: sales@eta-usa.com