Lily – Digital (Rev. 2.0)



          Model : Lily – Digital (Rev.2.0) Part No. : FCB-AOD-Axx8 April, 2005 "!"!"!"!!!!!#%$’&#%$’&#%$’&#%$’&($")*"+$")*"+$")*"+,$")*"+ )*+-)*+-)*+-)*+- , .,.,.,/.,0,++0,++0,++0,++ )*-"0123#%"&4)*-"0123#%"&4)*-"0123#%"&4)*-"0123#%"&4 $5$5$5$5 6#!789,4:$;,&9,8:$;:$ <=789,4:$;,&9,8:$;8 >#?@A#7CBBDBFE#@AGH#I1JE#G 1 of 26 Lily – Digital (Rev. 2.0) CONTENTS 1. Revisions of History -------------------------------------------- 3 2. General Descriptions -------------------------------------------- 4 3. Features -------------------------------------------- 4 4. Block Diagram -------------------------------------------- 5 5. Outline Dimensions --------------------------------------------- 6 6. Connectors Information -------------------------------------------- 10 7. Reference Data --------------------------------------------- 17 8. Supported Input Formats --------------------------------------------- 18 9. On Screen Display --------------------------------------------- 20 10. Customization --------------------------------------------- 28 11. Numbering System --------------------------------------------- 28 12. Contacts --------------------------------------------- 28 13. Supportable Panel List --------------------------------------------- 29 14. Order Information --------------------------------------------- 31 The information presented in this document may form a part of quotation or contract under the agreement of both parties. Otherwise, this datasheet is subject to change without prior notice. 2 of 26 Lily – Digital (Rev. 2.0) 1. Revisions of History Revision No. Date Page Description Engineer Ver. 0.0 Mar.11,'04 All First Draft, Mechanical Dimension Injoon Lee Ver. 1.0 Mar.16,'04 All Preliminary Specification Injoon Lee Cover & 24 Ver. 1.1 Apr.20,'04 Change Company Address Jaya Yoon Ver. 1.2 Apr.21,'04 25 Modify Supportable Panel List Jaya Yoon Ver. 2.0 Apr.22,'05 All Chage Scailer, adding function Injoon Lee 3 of 26 Lily – Digital (Rev. 2.0) 2. General Descriptions Lily-Digital is an advanced TFT-LCD Monitor Control Board. The function of this design can replace a full conventional CRT monitor with a large size of TFT-LCD modules. It is suitable for video resolution up to SXGA @ 75Hz in all video modes, the full display area of the module is used. The design is implemented as a single printed circuit board, the main function of which will be analog and digital video interface. Lily-Digital is designed to support various TFT LCDs up to SXGA resolution by BIOS option, as shown in item 13 “Supportable Panel List” on page 25. 3. Features • Designed to give state-of-the-art picture quality • Analog RGB / DVI (Digital Video Interface) / Audio input (PC) / Speaker out (x1) • Optional support to composite video and Y/C input • Optional input combination, e.g., PC monitor only • Full CRT multi-sync monitor compatibility • Multi-sync capability up to SXGA resolution @ 75Hz, compatible standard SVGA, XGA and SXGA VESA timing • Expand DOS, VGA, SVGA and SXGA to full screen display • True color (16.7M) data processing and display driving • Single control operated & transparent On-Screen-Display (hereafter ‘OSD’) user interface • Full control of all relevant display and interface parameters via OSD • Multi-language • VESA DDC1/2B compliant • Compatible with VESA DPMS power saving modes • Form factor: 100mm (L) x 150mm (W) x 19.1mm(H) • +12V DC single power: 48watts AC/DC power adapter recommended • Up to +24V DC single power available for large size panel • Operating temperature: 0°C to 50°C • The 2watt x 2ch. @ 8ohms audio capability with volume and mute control through either OSD or optional remote controller • OSD & Power Switch Board : FOSD-xxx 4 of 26 Lily – Digital (Rev. 2.0) 4. Block Diagram 24V DC 3.3V DC Inverter Inverter 12V DC Regulator 5.0V DC I/F Control Red Green 8bitx3 ADC Blue Sync LCD I/F DVI Scaler LVDS Audio in Audio Amplifier Audio out DDC DDC x2 Debug I/F M C U (RS-232) IR Remote Receiver ESTECom Internal Usage Controller (option) NVM OSD I/F 5 of 26 Lily – Digital (Rev. 2.0) 5. Outline Dimensions 5.1 Standard Connectors for Power, DVI, Audio, OSD, Inverter )K#@AL7 100mm (L) x 150mm (W) x 19.1mm(H) 6 of 26 Lily – Digital (Rev. 2.0) 5.2 Optional Video Daughter Board Connectors for Composite / S-Video Input )K#@AL7 63mm (L) x 62mm (W) x 17.1mm(H) 7 of 26 Debug Speaker-out Inverter Inverter power OSD Lily – Digital (Rev. 2.0) 5.3 Board with the Standard Connectors Configuration M!+NO)*PMIG3!. QR#S LVDS Output TTL Output Power VGA Audio-in Audio-out Jack DVI D-Sub from PC Power Input option 1 2 8 of 26 Lily – Digital (Rev. 2.0) 5.4 Video Board Connectors Configuration (Option) M!+NO)*FNUT1K@AGH#V#NU. ,# Y/C (S-Video) Composite Video Left Sound-In from VHS or DVD Right Sound-In from VHS or DVD 9 of 26 Lily – Digital (Rev. 2.0) 6. Connectors Information 6.1 Input Connectors Power Input Connector Connector : DC12V Jack (J6) Pin No. Symbol Description Pin No. Symbol Description 2, 1 GND GND 3 VCC POWER Power Input Connector (Alternative) Connector : Molex 5274-02 (J17) Pin No. Symbol Description Pin No. Symbol Description 1 VCC POWER 2 GND GND Power Input Connector (Alternative) Connector : Molex 5268-04 (J7) Pin No. Symbol Description Pin No. Symbol Description 1 VCC POWER 3 GND GND WX,YZY[]\^_*‘abdcZebdcfe Analog RGB Input Connector Connector : Mini D-Sub 15pin(J2) Pin No. Symbol Description Pin No. Symbol Description 1 RED Analog Red 9 NC +5Vdc 2 GREEN Analog Green 10 SGND Sync GND 3 BLUE Analog Blue 11 NC No Connection 4 GND No Connection 12 SDA DDC Serial Data 5 GND Digital GND 13 HSYNC Horizontal Sync 6 RGND Red Return 14 VSYNC Vertical Sync. 7 GGND Green Return 15 SCL DDC Data Clock 8 BGND Blue Return 10 of 26 Lily – Digital (Rev. 2.0) Analog RGB Input Connector (Alternative) Connector : Molex 53015-1410 (J1) Pin No. Symbol Description Pin No. Symbol Description 1 NC No Connection 8 GND GND 2 GND GND 9 GND GND 3 DSCL DDC Data Clock 10 BLUE BLUE 4 DSDA DDC Serial Data 11 GND GND 5 GND GND 12 GREEN GREEN 6 V-Sync Vertical Sync 13 GND GND 7 H-Sync Horizontal Sync 14 RED RED DVI-I Input Connector Connector : DVI-D (DVI 1) Pin No. Symbol Pin No. Symbol Pin No. Symbol 1 T.M.D.S. Data2- 9 T.M.D.S. Data1- 17 T.M.D.S. Data0- 2 T.M.D.S. Data2+ 10 T.M.D.S. Data1+ 18 T.M.D.S. Data0+ T.M.D.S. T.M.D.S. T.M.D.S. 3 11 19 Data2/4 Shield Data1/3 Shield Data0/5 Shield 4 T.M.D.S. Data4- 12 T.M.D.S. Data3- 20 T.M.D.S. Data5- 5 T.M.D.S. Data4+ 13 T.M.D.S. Data3+ 21 T.M.D.S. Data5+ 6 DDC Clock 14 +5V Power 22 T.M.D.S. Clock Shield Ground 7 DDC Data 15 23 T.M.D.S. Clock+ (Return for +5V, H-Sync, and V-Sync) 8 Analog Vertical Sync 16 Hot Plug Detect 24 T.M.D.S. Clock- 11 of 26 Lily – Digital (Rev. 2.0) Audio Input Connector Input Connector : Stereo Jack (J12) Pin No. Symbol Description Pin No. Symbol Description 1 GND GND 4 NC No Connection 2 NC No Connection 5 AUDIO External Audio-R 3 AUDIO External Audio-L Audio Output Connector Output Connector : Stereo Jack (J13) Pin No. Symbol Description * Input Connector : 1 GND GND Stereo Jack (J12) 2 NC No Connection * Output Connector : 3 AUDIO Audio Out L+ Stereo Jack (J13) 4 NC No Connection 5 AUDIO Audio Out R+ Speaker Connector : 4 Pin Connector (J15) (Alternative of J13) Pin No. Symbol Description Pin No. Symbol Description 1 AUDIO Sound Out_R+ 3 GND GND 2 GND GND 4 AUDIO Sound Out_L+ 12 of 26 Lily – Digital (Rev. 2.0) OSD, LED Interface Connector : OSD1 Connector : 53015-1210 Made by Molex (J8) Pin No. Symbol Description Pin No. Symbol Description 1 LED 1 LED 1 7 KEY2 Increase 2 LED 0 LED 0 8 KEY3 Decrease Exit 3 Vcc Vcc 5V 9 KEY4 (Hot Key : Auto Config) 4 RCVR Remote Control 10 KEY5 Menu 5 GND GND 11 KEY6 Source Select 6 KEY1 Power 12 KEY7 Up ( Not Use) Debug Connector : J9 Connector : 53015-0410 Made by Molex(J1) Pin No. Symbol Description 1 GND GND 2 RX TXD 3 TX RXD 4 VCC Vcc 13 of 26 Lily – Digital (Rev. 2.0) 6.2 Output Connectors LVDS Output Connector (J4) : Yeonho 12507WR-30 Pin No. LVDS TTL Pin No. LVDS TTL 1 VCC VCC 16 Tx1-(ODD) Not use 2 VCC VCC 17 Tx0+(ODD) Not use 3 VCC VCC 18 Tx0-(ODD) Not use 4 VCC VCC 19 GND GND 5 GND GND 20 Tx3+(EVEN) BLUE7 6 N/C N/C 21 Tx3-(EVEN) BLUE6 7 GND GND 22 TxCLK+(EVEN) BLUE5 8 Tx3+(ODD) Not use 23 TxCLK-(EVEN) BLUE4 9 Tx3-(ODD) Not use 24 Tx2+(EVEN) BLUE3 10 TxCLK+(ODD) Not use 25 Tx2-(EVEN) BLUE2 11 TxCLK-(ODD) Not use 26 GND GND 12 Tx2+(ODD) Not use 27 Tx1+(EVEN) BLUE1 13 Tx2-(ODD) Not use 28 Tx1-(EVEN) BLUE0 14 GND GND 29 Tx0+(EVEN) GREEN7 15 Tx1+(ODD) Not use 30 Tx0-(EVEN) GREEN6 14 of 26 Lily – Digital (Rev. 2.0) TTL Output Connector : Connector : Yeonho 12507WR-25 (J3) Pin No. Symbol Description Pin No. Symbol Description 1 GND Ground 14 RED6 RED6 2 DCLK Clock Output 15 RED7 RED7 3 GND Ground 16 GND Ground 4 DHS H-SYNC 17 GND Ground 5 DVS V-SYNC 18 GREEN0 GREEN0 6 DE Data Enable 19 GREEN1 GREEN1 7 GND Ground 20 GREEN2 GREEN2 8 RED0 RED0 21 GREEN3 GREEN3 9 RED1 RED1 22 GREEN4 GREEN4 10 RED2 RED2 23 GREEN5 GREEN5 11 RED3 RED3 24 GND Ground 12 RED4 RED4 25 GND Ground 13 RED5 RED5 15 of 26 Lily – Digital (Rev. 2.0) Backlight Connector Connector : 53015-0810 made by Molex(J10) Pin No. Symbol Description Pin No. Symbol Description 1 BRIGHT Brightness Adjustment 5 GND Ground 2 ON/OFF Back-light On/Off 6 GND Ground 3 GND Ground 7 VDD INV PWR 4 5V 5V ( NOT USE) 8 VDD INV PWR Backlight Power Connector ( For Large size panel ) Connector : 53015-0810 made by Molex(J11) Pin No. Symbol Description Pin No. Symbol Description 1 VDD INV PWR 6 GND Ground 2 VDD INV PWR 7 GND Ground 3 VDD INV PWR 8 GND Ground 4 VDD INV PWR 9 GND Ground 5 VDD INV PWR 10 GND Ground 16 of 26 Lily – Digital (Rev. 2.0) 7. Reference Data Video Input Timing: Supported vertical refresh rates for each mode are as follows: 640 x 350 70Hz 640 x 400 70Hz 720 x 350 70Hz 720 x 400 70Hz 640 x 480 60~75Hz 800 x 600 60~75Hz 1024 x 768 60~75Hz 1152 x 864 60~75Hz 1280 x 960 60Hz 1280 x 1024 60~75Hz Sync. : H/V Separated TTL Electrical Parameters Reference FCB-xx-Axx8, t 25 ggggC A Symbol Description Min Typ Max Unit V +12V DC Power Supply (+24VDC optional power) DD 10.8 12.0 13.2 V V Video Input Signal (w.r.t. GND) 0.5 0.7 1.0 V i(RGB) PP f Video Sample Rate 80 MHz S f Horizontal Sync Frequency 30 60 KHz HS f Vertical Sync Frequency 56 75 Hz vs F Sync Input High Level 2.5 V SIH V Sync Input Low Level 0.8 VDC SIL I Supply Current +12V (with LCD & Inverter) 3.0 DD2 3.3 A Note : Power consumption measuring condition is 2 pixel checkboard pattern @ XGA 75Hz and maximum brightness with Samsung LTM170E4 & inverter at t 25hC. A VDD : Input Power voltage depend on panel or Inverter input voltage 17 of 26 Lily – Digital (Rev. 2.0) 8. Supported Input Formats 8.1 Video Mode Support Lily-Digital can support any video mode within the following input constraints: • Signal sample frequency with the input £ 80MHz • Horizontal sync frequency between 30KHz and 80KHz The modes are detected with the presentation of the input and previous alignments for setup are automatically recalled. The emulation of a true multi-sync monitor is implemented. The factory preset supported modes are as follows: Mode Resolution Refresh Rate H-Freq. Pixel Freq. Remarks VGA 640 x 350 70Hz 31.47KHz 25.175MHz VESA Standard VGA 720 x 400 59.940HZ 31.469KHZ 25.175MHZ IBM VGA 3H VGA 640 x 480 60Hz 31.5KHz 25.175MHz Industry Standard VGA 640 x 480 72Hz 37.9KHz 31.500MHz VESA Standard VGA 640 x 480 75HZ 37.5KHZ 31.500MHZ VESA Standard SVGA 800 x 600 60Hz 37.9KHz 40.000MHz VESA Guidelines SVGA 800 x 600 72Hz 48.1KHz 50.000MHz VESA Standard SVGA 800 x 600 75HZ 46.9KHZ 49.500MHZ VESA Standard XGA 1024 x 768 60Hz 48.4KHz 65.000MHz VESA Guidelines XGA 1024 x 768 70Hz 56.5KHz 75.000MHz VESA Standard XGA 1024 x 768 75HZ 60KHZ 78.750MHZ VESA Standard SXGA 1280 x 1024 60Hz 64KHZ 108.000 MHZ VESA Standard SXGA 1280 x 1024 75HZ 80KHZ 135.000 MHZ VESA Standard Notes: 1. All mentioned modes are non-interlaced. The maximum and minimum frame rates are decided by the TFT-LCD. 2. Factory preset modes are overwritten by additional user alignments for automatic recall. The factory preset modes can be recalled at any time. 8.2 LCD Panel & I/O Support Lily-Digital is an advanced and general application for a TFT-LCD Monitor Control Board. Therefore, the application of this board is not limited to panel manufacturers or models. Furthermore, this board operates with any LVDS interface panel ranging from VGA to SXGA that can be driven with three or less timing signals. The usual timing signals to a panel are H-sync, V-sync and Data Enable. For backlight intensity control mechanism, a built-in DC dimming drive signal is installed into the CCFL inverter control port. The CCFL inverter DC power, generally 12V DC, is attached to the same port. Users can design their own key pad board by using OSD & power tact switch as well as a two-color LED. On/off power switch and OSD input signal are detected and executed by the micro controller. 18 of 26 Lily – Digital (Rev. 2.0) 8.3 Audio Support Lily-Digital has a Hi-Fi Stereo Audio amplifier that users can control by using OSD interface. There is 1 input channel to the audio input port. The audio output is 2 x 2watt, and users can easily configure the audio interface features by using the earphone output and speaker output ports. Output Max. : 2 x 2watts @ 8ohm Current : 450mA max. Input Voltage: 12V DC THD (Total Harmonic Distortion): 0.15% S/N: 105dB 8.4 DVI (Digital Video Interface) Lily-Digital has one DVI input port which complies with VESA DVI standard. Therefore, users can make direct interface to the DVI output of Digital VGA cards. The signal source can be switched through OSD. High-end Multi-media Display System TFTL-LCD FCB-xx-Axx8 Speaker DVD i T )-jkMjM VCR Camcorder Etc. 19 of 26 Lily – Digital (Rev. 2.0) 9. OSD (On Screen Display) 9.1 OSD Board Dimension 9.1.1 OSD Board with 6 Buttons Part number : FOSD-T01-6 Menu/Exit(Auto Config.)/Decrease(Left)/Increase(Right)/Source Select/Power OSD Key Description • MENU : Menu Key • DOWN (EXIT): Exit Key (HOT Key : Auto Config.) • DECREASE : Decrease Key, Left Key (HOT Key : Audio Decrease) • INCREASE : Increase Key, Right Key (HOT Key : Audio Increase) • SOURCE : Source Select HOT Key : Source Select [Analog – DVI ] [– Composite – S-Video {option} ] ) 20 of 26 Lily – Digital (Rev. 2.0) 9.2 OSD menu enables user to manipulate the image and settings. MODE 40 1280x1024 60Hz Color Contrast 50 - + Picture Brightness 100 - + Function Gamma 0 1 2 3 OSD Menu Color Temp. Cool Normal Warm User Misc. Color Adjust Exit Exit Main Menu Sub Menu Operation - Contrast is ratio of luminance between black and white. Contrast - Adjust distinction. (Analog RGB Only) - Adjust Brightness of the screen. Brightness Color (used to PWM control) Gamma - RGB gain option. Available - Choice of Warm, Normal, Cool and user’s option is chosen, Mode RGB can be adjusted. - Analog - User : Able to adjust the color by controlling Red, Green, RGB Color Temp and Blue. - DVI - Warm : Red-tinged screen. - Video - Normal : Green-tinged screen. - Cool : Blue-tinged screen. - S-Video - TV - If the menu of Color Temp is set in user mode, the color can Color Adjust be controlled freely. Exit - Go back to main menu. 21 of 26 Lily – Digital (Rev. 2.0) MODE 40 1280x1024 60Hz Color H.Position 50 - + Picture V.Position 100 - + Function Phase 0 - + OSD Menu Clock 50 - + Misc. Sharpness 1 2 3 4 5 Exit Exit Main Menu Sub Menu Operation H.Position - Move screen horizontally. V.Position - Move screen vertically. - Adjust Phase of screen. Used when noise or overlapped lines are shown on the screen. Picture Phase Caution : Do not make manual adjustment when the picture is in its normal Shape or you will create problem Available on it. Mode - Adjust horizontal size of the screen by increasing or - Analog decreasing the number of picture elements. RGB Clock Caution : Perform this adjustment just in the case of having horizontallyUnmatched picture after operation the “ Auto Adjustment ” Sharpness - Adjust sharpness of pictures in 5 levels. Exit - Go back to main menu. 22 of 26 Lily – Digital (Rev. 2.0) MODE 40 1280x1024 60Hz Color Auto Adjust YES NO Picture Auto Color YES NO Function Exit OSD Menu Misc. Exit Main Menu Sub Menu Operation -Auto configuration of geometry. Auto Adjust - Automatically adjusted items are : Function 1) Clock 2) Phase 3) Position is centered Available Auto Color Color automatically set from strange input signal. Mode - Analog RGB Exit - Go back to main menu. 23 of 26 Lily – Digital (Rev. 2.0) MODE 40 1280x1024 60Hz Color Language Picture OSD H.Pos 92 - + Function OSD V.Pos 92 - + OSD Menu OSD Timer 20 - + Misc. Translucent 1 - + Exit Exit Main Menu Sub Menu Operation - Select the language of OSD menu. Language English / Français / Deutsch / Español / Italiano / Danish OSD Menu OSD H.Pos - Adjust horizontal position of OSD menu by value. Available OSD V.Pos - Adjust vertical position of OSD menu by value. Mode - Analog - The range of controlling the duration time OSD Timer RGB of the OSD menu (OSD turn-off time). - DVI - Choose between “ translucent ” and “ opaque “ for the Translucent - Video basic color Of OSD menu. - S-Video l?ImFGHKnK# - TV Exit - 24 of 26 Lily – Digital (Rev. 2.0) MODE 40 1280x1024 60Hz Color Signal Source Picture Mode Select 640x400 720x400 Function Reset YES NO OSD Menu Volume 30 - + Misc. Exit Exit Main Menu Sub Menu Operation - Select input signal source. Signal Source Analog RGB / DVI / Composite Video / S-Video / TV Misc. Mode Select - Select DOS 640(Graphic) or DOS 720(Text) input mode. Available Mode - Analog Reset - Initial set-up, preset by the factory before forwarding. RGB - DVI Volume - Adjust volume. - Video - S-Video Exit - Go back to main menu. - TV 25 of 26 Lily – Digital (Rev. 2.0) MODE 61 N T S C 60Hz Color Contrast 50 - + Video Bright 50 - + Function Hue 0 + + OSD Menu Saturation 50 - + Misc. Sharpness 57 - + Exit Exit Main Menu Sub Menu Operation - Contrast is ratio of luminance between black and white. Contrast - Adjust distinction. Video Bright - Adjust white offset. Available Hue - Adjust between green tone and purple tone. Mode - Video Saturation - Adjust color intensity. - S-Video - TV Sharpness - Adjust sharpness of pictures in 7 levels. Exit - Go back to main menu. 26 of 26 Lily – Digital (Rev. 2.0) 10. Operation Message AUTO TRACKING (Analog RGB mode) oAUTO TRACKING Execute Auto Function Self Diagnostics (Analog RGB mode) o Input Signal is not present after NO SIGNAL power on with power switch. This message is disappeared after 10 sec or activity of input signal Self Diagnostics(Video/S-Video Mode) COMPOSITE VIDEO / o Input Signal is not present after S-VIDEO power on with power switch. This message is disappeared activity of input signal Out of Range o NO SUPPORT Input Signal is over the supporting range 27 of 26 Lily – Digital (Rev. 2.0) 10. Customization Based on a customer’s request, ESTECom customizes the FCB-xxx-Axx8 board configuration, harness connection & length, DDC and OSD menu. Generally, it requires MOQ (minimum order quantity) and a 1 month lead time after finalizing customization of the specification. Details should be agreed by both parties. 11. Numbering System FCB - X1 X2(D) – A X3 X4 8 - X5 X6 X7 X8 (–X9) FCB : Flat Panel Control Board (Basic Part Number ) X1 X2 D : Video Input Source AOD : Analog & DVI I/F AVD : Analog & Video & DVI I/F X3 X4 : Resolution VG: VGA SV: SVGA XG: XGA SX : SXGA 8 : Board model X5 X6 : Initial Two (2) Characters of manufacturer’s name of TFT-LCD Panel X7 X8 : Internal Number X9 : Blank : Standard(D-Sub) S : Low profile Example 1) Customer needs Analog input model for Samsung LTM170E4-L01 (SXGA TFT-LCD) : FCB-AO-ASX8-SS02 Example 2) Customer needs Analog & DVI Input model for LG LM181E1 (SXGA TFT-LCD) : FCB-AOD-ASX8-LG01 Example 3) Customer needs Analog & Video& DVI Input with low profile model for LG LM181E1 (SXGA TFT-LCD) : FCB-AVD-ASX8-LG01-S 12. Contacts Sales & Marketing / Tel. +82-31-427-8101 / Fax. +82-31-427-8108 / jayayoon@estecom.co.kr Tech. / Tel. +82-31-427-8101 / Fax. +82-31-427-8108 / talman@estecom.co.kr Address: ESTECom Co., Ltd. Rm # 705, Gunpo Hyundai I-Valley, 14-1, Dang-Dong, Gunpo-Si, Kyunggi-Do, Korea, 435-010 Tel. +82-31-427-8101 Fax. +82-31-427-8108 Web site: www.estecom.net 28 of 26 Lily – Digital (Rev. 2.0) 13. Supportable Panel List Lily-Digital-S board can support the BIOS and harness settings for the TFT-LCD models as followings: q:23q:23q:23q:23+rGH#"@s@+rGH#"@s@+rGH#"@s@+rGH#"@s@#BD#BD#BD#BD++++MMMM+!+!+!+!#### tv"xy"IGH23#2tv"xy"IGH23#2tv"xy"IGH23#2tv"xy"IGH23#2.,.,.,.,Q#Q#Q#Q#i,"23G w]K?#2i,"23G w]K?#2i,"23G w]K?#2i,"23G w]K?#2#@s!#@s!#@s!#@s!GHGHGHGH PPPPIjutv9SIjutv9SIjutv9SIjutv9SPp)*#+SPp)*#+SPp)*#+SPp)*#+S $;:E& AUO B104SN02 SVGA 350 40/60/60/60 AUO 19 M190EN02/04 SXGA 350 65/65/65/65 CMO 19 M190E3-L01 SXGA 250 85/85/85/85 FUJITSU 19 FLC48SXC8V-10/11 SXGA 300 85/85/85/85 HYDIS 17 HT17E12-100 SXGA 250 65/65/40/65 LG 6.4 LB064V02-A1 VGA 250 45/45/15/35 LG 10.4 LB104V03-A1 VGA 400 60/60/40/50 LG 20.1 LC201V2 VGA 450 85/85/85/85 LG 15 LM150X05 XGA 250 65/65/45/55 LG 17 LM170E01 SXGA 250 70/70/60/60 LG 18.1 LM181E06 SXGA 250 80/80/80/80 LG 19 LM190E01/E02 SXGA 250 88/88/88/88 MITSUBISHI 10.4 AA104SG01 SVGA 400 70/70/60/50 NEC 15 NL10276AC30-02 XGA 180 85/85/85/85 NEC 15 NL10276AC30-04 XGA 200 55/55/45/45 NEC 15 NL10276AC30-07 XGA 400 85/85/85/85 NEC 6.3 NL10276BC12-01 XGA 200 50/50/30/45 NEC 8.4 NL10276BC16-01 XGA 300 85/85/85/85 NEC 15 NL10276BC30-10 XGA 250 60/60/40/60 NEC 18.1 NL128102AC28-07 SXGA 200 85/85/85/85 NEC 19 128102BC29-01 SXGA 300 85/85/85/85 NEC 6.5 NL6448AC20-01 VGA 200 50/50/35/45 29 of 26 Lily – Digital (Rev. 2.0) q:23q:23+rGH#"@s@+rGH#"@s@#BD#BD++MMMM+!+!##q:23q:23+rGH#"@s@+rGH#"@s@#BD#BD+++!+!## tv"xy"IGH23#2tv"xy"IGH23#2.,.,Q#Q#i,"23G w]K?#2i,"23G w]K?#2#@s!#@s!GHGHtv"xy"IGH23#2tv"xy"IGH23#2.,.,Q#Q#i,"23G w]K?#2i,"23G w]K?#2#@s!#@s!GHGH PPIjutv9SIjutv9SPp)*#+SPp)*#+SPPIjutv9SIjutv9SPp)*#+SPp)*#+S zE NEC NL6448BC20-08 VGA 300 50/50/35/45 NEC 8.4 NL6448BC26-01 VGA 400 60/60/40/60 NEC 10.4 NL6448BC33-31 VGA 350 50/50/40/45 NEC 10.4 NL6448BC33-46 VGA 350 70/70/45/55 NEC 10.4 NL8060AC26-11 SVGA 190 45/45/20/45 NEC 10.4 NL8060BC26-17 SVGA 280 50/50/35/45 NEC 12.1 NL8060BC31-17 SVGA 350 55/55/40/50 OPTREX 6.4 T-51382D064J-FW-P-AA VGA 300 55/55/15/35 OPTREX 10.4 T-51410D104-FW-P-AA SVGA 140 45/45/15/40 OPTREX 10.4 T-51410D104FW-P-AB SVGA 550 45/45/15/40 OPTREX 12.1 T-51512D121J-FW-A-AB SVGA 350 60/60/50/40 OPTREX 8.4 T-51638D084-FW-A-AA VGA 400 64/64/60/50 OPTREX 8.4 T-51639D084U-FW-A-AA XGA 300 60/60/40/50 OPTREX 6.5 T-51750GD065J-FW-AA VGA 400 50/50/45/35 OPTREX 12.1 T-51756D121J-FW-A-AA XGA 300 60/60/50/40 SEC 15 LTM150XH-L01 XGA 250 70/70/55/60 SEC 15 LTM150XO-L01 XGA 250 65/65/50/60 SEC 17 LTM170E6-LXX SXGA 250 89/89/89/89 SEC 17 LTM170E8-LXX SXGA 250 89/89/89/89 SEC 17 LTM170EU-LXX SXGA 300 75/75/75/60 SEC 17 LTM170EX-L0X SXGA 270 75/75/75/60 SEC 19 LTM190E1-L0X SXGA 250 85/85/85/85 SEC 19 LTM190E4-L0X SXGA 250 89/89/89/89 SHARP 12.1 LQ121S1DG41 SVGA 370 70/70/50/60 TOSHIBA 15 LTM15C458T XGA 350 70/70/80/80 TOSHIBA 12.1 LTD121C30S SVGA 350 60/60/70/70 * ESTECOM can support any panels by changing firmware. 30 of 26 Lily – Digital (Rev. 2.0) 14. Order Information ORDER REQUEST FORM 1. PRODUCTION REQUESTED Control No : ESORF- Customer Country Quantity PO# Part number PO date Product Delivery Due Date 2. TFT-LCD INFORMATION LCD P/N LCD maker Inverter P/N Inverter maker PCB revision Serial No. BIOS revision 3. ACCESSORIES TO BE INCLUDED Item Product Part Number Qty Length Including Q/A Check Remarks TFT-LCD Main Board OSD Board Board Inverter Board Sub board 1 Sub board 2 Connector DVI in connector Type VGA in connector IF Cable 1 IF Cable 2 VGA Cable OSD Cable Harness LED/IR Cable & Cable Inverter Cable Power in Cable Video in cable DVI in cable AC/DC Adapter Power AC/DC Cable Tuner TV Tuner cable Remote controller Customization 31 of 26