esd electronics, inc. H A R D W A R E • S O F T W A R E • E N G I N E E R I N G VME-PMC-CADDY/2 VME-PCI Link Intelligent VME-Carrier Board for PMC Modules The VMEbus unit VME-PMC-CADDY/2 is a VME64-base board that can carry up to two PMC modules of normal size. For the VMEbus connection, esd electronics uses the VME-PCI Bridge Tsi148 by Tundra. VMEbus Interface The Tsi148 design allows the board to operate either as slave or as master on the VMEbus. Operating as a master, it supports a 4-level arbiter. The VMEbus interrupt can be applied to any of the seven interrupt-request lines. Two 160-pin VG-connectors VME-PMC-CADDY/2 (complementary to DIN41612) connect the board to the VME- bus for VME64 systems. LEDs in the front panel indicate an • VMEbus Interface Master or slave functionality active VMEbus-interrupt request and a VMEbus access onto 4-level arbiter the board. Address/data up to A64/D64 VME64-extension connector 2eVME and 2eSST fast protocol PMC Slots • PMC Slots The two PMC slots, designed according to the standard IEEE Slots according to IEEE Std 1386-2001 specified Two single size PMC modules insertable Std 1386-2001 (except the standard I/O pin routing)), make VME-PCI Bridge Tundra Tsi148 it possible to insert all PMC modules using 3.3 V signaling. PMC I/Os applied to VMEbus P2, signals routed acc. to VITA 35 (P4V2-64ac, P4V0-64) In addition to the connectors for the PMC address/data and Option ‘-32P2’: different P2-pinning PPMC according to VITA 32 control signals, every slot of the VME-PMC-CADDY/2 has an Optional one XMC according to VITA 42.3 I/O-connector that applies the I/O signals of the PMC modules PCI 64 bit at 66 MHz, 3.3 V only • CPU to VMEbus connector P2. Two different P2 pin assignments are Freescale MPC 8349 available: In the standard configuration, each P2-pin connects 400 MHz 128 Mbyte DDR2 RAM ECC to one I/O-pin of the PMC modules acc. to VITA 35 (P4V2-64ac, 4 Mbyte Flash (NOR) P4V0-64). In the option ‘-32P’ the pin assignment is acc. to 2x RS-232 serial interface • Options IEEE Std 1386-2001, Table 8. This pin assignment offers the Extended temperature range available connection of the two PMC-modules via P2. Conduction cooled version Front Panel The front panel of the VME-PMCCADDY/2 has two cutouts for the front panels of the PMC modules. A blank cover for unused For further information please visit slots is included in the price. http://www.esd-electronics-usa.com/VME.html Software An example library for the initialization of the board in C- Source-Code for VxWorks is available for a fee on a disk (MS- growing with the DOS format). Drivers for other operating systems are available upon request (please state your operating system with the ver- sion number when you order). challenge Phone: 800-732-8006 • Fax: 800-732-8093 • Web: http://www.esd-electronics-usa.com• Email: us-sales@esd-electronics.com esd electronics, inc. H A R D W A R E • S O F T W A R E • E N G I N E E R I N G VME-PMC-CADDY/2 Intelligent VME-Carrier Board for PMC Modules Technical Specifications: VMEbus: Controller: TUNDRA Tsi148 VMEbus access: • Legacy protocols to protect existing VME investment • 2eVME and 2eSST protocols • VME64 extensions Base address: Geographical addressing Address modifier: Standard supervisory and non-privileged data access, extended supervisory and non-privileged data access, short supervisory and non-privileged access VMEbus standard: IEEE 1014 Rev. D VMEbus connector: 160-pole VG connector (complementary to DIN 41612), acc. to VME64 extension standard LEDs: LEDs in the front panel indicate VMEbus interrupt and VMEbus access PMC/XMC slots: Standard: IEEE Std 1386-2001 Size: Two single size modules VME PCI Bridge: Tundra Tsi148, 32/64 bit at 33/66 MHz Voltage level: 3.3 V (signal level) only Voltage option: Optional onboard 3.3 V generation XMC option: Slot 1 optional with XMC (J15) interface according to VITA 42.3 standard. General: Temperature: Standard: Conduction Cooled: • 0...50 /C (Order no.: V.1915.02/.11) • -40...+85 /C (Order no.: • -40...+85 /C (Order no.: V.1915.03 /.13) V.1916.02 /.11) Humidity: Max. 90 %, non-condensing Connector types: • P1, P2: VMEbus (160 pins) • J13, J23: PCI 64 signals • J11, J12, J21, J22: PMC address/data • J14, J24: PMC I/O signals Board size: 160 mm x 233 mm VME dimensions: 6 U height, 4 HP width Order Information: Designation Order no. VME-PMC-CADDY/2 VMEbus CPU board for two single PMC modules, P2-pin assignment acc. to Vita 35 (P4V2-64ac, P4V0- V.1915.02 64) (no interconnection between PMC-modules), no XMC, 3.3 V supply for PMC fed from VMEbus VME-PMC-CADDY/2-T As V.1915.02, but for extended temperature range V.1915.03 VME-PMC-CADDY/2-32P2 VMEbus base board for two single PMC modules, P2-pin assignment acc. to IEEE Std P1386-2001, V.1915.11 Table 8 (interconnection between 16 pins of the PMC-modules), no XMC, 3.3 V supply for PMC fed from VMEbus VME-PMC-CADDY/2-T-32P2 As V.1915.11, but for extended temperature range V.1915.13 VME-PMC-CADDY/2-CC As V.1915.02, but conduction cooled, extended temperature range V.1916.02 VME-PMC-CADDY/2-CC-32P2 As V.1915.11, but conduction cooled, extended temperature range V.1916.11 VME-PMC-CADDY/2 VxWorks LIB VxWorks library V.1915.58 esd electronics, Inc. Phone: 800-732-8006 Fax: 800-732-8093 Web: http://www.esd-electronics-usa.com Email: us-sales@esd-electronics.com