esd electronics, inc. H A R D W A R E • S O F T W A R E • E N G I N E E R I N G VME-DVI DVI Color Graphics Processor • 69030 graphics controller • Resolution up to 1600x1200x16 bits per pixel • 4 Mbyte on-chip high performance SDRAM memory • DVI-I connector including RGB-analog VME-DVI • PowerPCTM IBM 405GP • 10/100BaseT ETHERNET • Two CAN interfaces (TTL-level) • Serial interfaces Graphics Controller Asiliant 69030 The powerful graphics controller 69030 offers display modes TTL-level CAN signals to the VME P2 connector. Both CAN al- from 640x480 (true color) at 85 Hz up to 1600x1200 (16 bit low data transfer rates of 1 Mbit/s. One of two RS-232 serial colors) at 60 Hz. The DVI-I-interface controls CRT-monitors by ports is available via a DSUB9 connector in the front panel, the analog video signals as well as TFT-monitors by digital video other one via the VMEbus P2 connector. signals. Software Support Keyboard and Mouse Interface The flash memory carries a standard ppcboot and enables the The board is equipped with a Mini-DSUB9-connector as PS2- VME-DVI to boot various operating systems from network and interface. You can connect a PS2-keyboard and a PS2-mouse onboard Flash. The VME-DVI directly supports Linux and Vx- to this port simultaneously with an adapter. Works with full support of onboard drivers by esd, others on request. There is also a bunch of higher layer protocols like PowerPCTM Control CANopen, DeviceNet as well as an on-board web server avail- The VME-DVI is equipped with the IBM PowerPCTM 405GP able. Graphics drivers are available for VxWorks, RTOS/UH, with 200 or 266 MHz that offers a performance of up to Linux and QNX. The module supports Windows 98/NT/2000, 375 MIPS. 32 Mbyte (optional 64 Mbyte) SDRAM and up to and other drivers are available on request. 32 Mbyte Flash are available as program and data memory. A non-volatile NVRAM enables the VME-DVI to save valuable process variables during power off sequences. For further information please visit Network Interfaces http://www.esd-electronics-usa.com/VME.html The VME-DVI comes with an ETHERNET interface for 10 Mbit/s and 100 Mbit/s nets. It is accessible as 10/100BaseT via RJ45 connector in the front panel. The board provides 2 CAN inter- growing with the faces based on SJA1000 CAN controllers. The board routes challenge Phone: 800-732-8006 • Fax: 800-732-8093 • Web: http://www.esd-electronics-usa.com• Email: us-sales@esd-electronics.com esd electronics, inc. H A R D W A R E • S O F T W A R E • E N G I N E E R I N G VME-DVI DVI Color Graphics Processor • 69030 graphics controller • Resolution up to 1600x1200x16 bits per pixel • 4 Mbyte on-chip high performance SDRAM memory • DVI-I connector including RGB-analog • PowerPCTM IBM 405GP VME-DVi • 10/100BaseT ETHERNET • Two CAN interfaces (TTL-level) • Serial interfaces Technical Specifications: Microprocessor circuit: General: Microprocessor: IBM PowerPCTM 405GP, 200/266 MHz, 32 bit Temperature: 0...50 /C Memory from 8 M x 32 bit SDRAM (32 Mbyte), Humidity: Max. 90%, non-condensing equipped: up to 16 M x 32 bit SDRAM (64 Mbyte), Connector VMEbus: P1/P2 acc. to IEC 603-xx (160 pins) up to 32 Mbyte Flash EPROM, types: CAN: VMEbus P2 acc. to IEC 603-xx 32 Kbyte NVRAM or optional RTC keyboard, mouse: Micro-DSUB 10/100BaseT: RJ45 Graphics: RS-232: DSUB9, VMEbus P2 graphics: DVI connector Outputs: Simultaneous display of digital TFT-monitor and Board size: 160 mm x 233 mm (6 U height, 1 slot width) analog CRT-monitor with different frequencies at Power: +5 V ±5 %, +12 V ±5 % DVI-connector Display modes: VGA (640x480) with True Color (24 bit) at 85 Hz SVGA (800x600) with True Color at 85 Hz XGA (1024x768) with High Color (16 bit) at 85 Hz SXGA (1280x1024) with 8 bit color at 75 Hz UXGA (1600x1200) with 16 bit color at 60 Hz Order Information: Interfaces: Designation Order no. ETHERNET: 10/100BaseT, IEEE802.3, RJ45-connector VME-DVI IBM PPC 405GP, 200 MHz 32 MB SDRAM, V.1510.02 32 MB Flash, graphics controller Serial: 1x RS-232 at DSUB9 in front panel, 1x RS-232 at VMEbus P2 connector CAN: 2x CAN, controller SJA1000, CAN 2.0A/B, TTL-level signals, 1 Mbit/s, VME P2 connector Keyboard, Two PS2-ports for keyboard and mouse at one Mini- mouse DSUB9 connector in front panel VMEbus section: Base address: Selectable via coding switch For further information please visit (no geographical addressing) http://www.esd-electronics-usa.com/VME.html VMEbus rev. IEEE 1014 rev. D Data transfer Master or slave function, options: A32, A24, A16; D8, D16, D32 Interrupts: Programmable levels esd electronics, Inc. Phone: 800-732-8006 Fax: 800-732-8093 Web: http://www.esd-electronics-usa.com Email: us-sales@esd-electronics.com