esd electronics, inc. H A R D W A R E • S O F T W A R E • E N G I N E E R I N G CPCI-HD/2 HD-Drive, CompactFlash and 2 SATA Interfaces • Single slot 3 U • On-board hard disk • CompactFlash-card slot in front panel • CompactFlash hot-plug capable • Two Serial ATA interfaces for external drives CPCI-HD/2 Hard Disk Drive On-Board The module CPCI-HD/2 is a CompactPCI board in 3 U form fac- tor (4 HP). It is equipped with the SATA-Controller Sil3114 that supports four SATA-channels. There are two channels used as Serial ATA interfaces, one channel is to control a CompactFlash slot and one channel to control the local 2.5” HD drive. The factory installed HD capacity may change upwards with the improvement of drive technology. For further information please visit CompactFlash Card Interface http://www.esd-electronics-usa.com/CompactPCI.html The board is equipped with a type I CompactFlash cardholder with the card slot accessible through the front panel, support- ing ‘Hot pluggable’ operation, and accessing data in ‘True IDE’ mode. Interfaces for External Devices Two on-board SATA plugs allow attachment of two external devices, and modification to rear I/O-connection is possible on request. Software Support The CPCI-HD/2 runs with the standard system drivers of Linux (from Kernel 2.6.19), QNX (from 6.x) and Windows (Vista, 2003 growing with the Server, 2000/XP). challenge Phone: 800-732-8006 • Fax: 800-732-8093 • Web: http://www.esd-electronics.us • Email: us-sales@esd-electronics.com esd electronics, inc. H A R D W A R E • S O F T W A R E • E N G I N E E R I N G CPCI-HD/2 HD-Drive, CompactFlash and 2 SATA Interfaces • Single slot 3 U • On-board hard disk • CompactFlash-card slot in front panel • CompactFlash hot-plug capable • Two Serial ATA interfaces for external drives CPCI-HE/2 Technical Specifications CompactPCI connection Interface according to CPCI Specification, Rev. 2.0, 32 For further information please visit bit, 33/66 MHz http://www.esd-electronics-usa.com/CompactPCI.html PCI-bridge SiI3114 Hard Disk Drive and CompactFlash IDE device bridge SiI3811 HD drive 44-pole 2 mm IDE connector, 2.5” HD drive, capacity >40 GB CompactFlash according to CompactFlashTM specification, type I CompactFlash card holder, True IDE’ mode, 3.3 V power supply Hot plugging hot plug capability (Linux and Windows systems) Order Information SATA interface Designation order no. SATA controller SiI3114, SATA 1.0 specification compliant CPCI-HD/2 CompactFlash interface, 2x I.2318.04 SATA interface; HD-drive > Connector SATA signal plug with peg and locking latch 40 GB General CPCI-HD/2-SATA/IDE As I.2318.04, but without HD- I.2318.02 Interface drive installed Ambient temp 0 ...+50o C CPCI-HD/2-IDE-Kit Mounting Kit for 2.5” IDE-hard I.2318.03 Humidity Max. 90%, non-condensing disk Power supply 3.3 V / 80 mA, 5V /max. 1.5 A (startup cur- rent, typ. with 40 GB HDD) 5V / 0.6 A (quiescent current) Status LEDs 4 LEDs (SATA0 - SATA3 activity) Board dimension 3 U height, 4 HP width esd electronics, Inc. Phone: 800-732-8006 Fax: 800-732-8093 Web: http://www.esd-electronics.us Email: us-sales@esd-electronics.com