esd electronics, inc. H A R D W A R E • S O F T W A R E • E N G I N E E R I N G AMC-ADIO24 AMC Analog/Digital I/O Module • 8 analog inputs ±10 V, 16 bit AMC-ADIO24 • 2 analog outputs ±10 V, 16 bit • 24 digital I/Os, TTL level • 4 trigger I/Os (RS-485) For further information please visit http://www.esd-electronics-usa.com/AMC-CAN-Interfaces.html I/O Data Management 24 Digital I/Os with Programmable Output The AMC-ADIO24 is equipped with a Spartan FPGA® that Configuration manages the I/O data exchange in cooperation with the PCIe esd electronics designed each of the 24 TTL-level I/Os for con- bridge. FIFOs for input and output direction and DMA to the figuration as input or output, high side driver, low side driver or PCIe host CPU’s memory minimizes undesired latency during both (sink/source), and the I/O port’s state reads back in any PCIe read cycles at higher data rates. This module reduces the configuration via a comparator with hysteresis. read cycles of the PCIe CPU to setup and diagnosis tasks. Trigger I/Os for Synchronization The firmware offers a ‘Timing-Routing-Pool’ with various trig- 8 Analog Inputs with 16 Bit Resolution ger conditions (RS-485 trigger input, timer, software, free flo The eight over voltage protected analog inputs connect to eight with the ability to evaluate each I/O. 16-bit A/D converters with a sampling rate of up to 200 kHz each. PCIe Device Access esd electronics makes a comprehensive register description 2 Analog Outputs with 16 Bit Resolution available for setup and I/O data exchange. Both 16 bit analog outputs have a differential and a single ended output circuit, accessible at separate pins at a Hart- ing® har-link® connector. The outputs are transient and short growing with the circuit protected. challenge Phone: 800-732-8006 • Fax: 800-732-8093 • Web: http://www.esd-electronics-usa.com • Email: us-sales@esd-electronics.com esd electronics, inc. H A R D W A R E • S O F T W A R E • E N G I N E E R I N G AMC-ADIO24 AMC Analog/Digital I/O Module • 8 analog inputs ±10 V, 16 bit • 2 analog outputs ±10 V, 16 bit • 24 digital I/Os, TTL level • 4 trigger I/Os (RS-485) AMC-ADIO24 Technical Specifications: MicroTCATM standards: TCA: PICMG® MTCA.0 R1.0, PICMG® AMC.0 R2.0 IPMI: IPMI V1.5, controller Atmel® AVR Updates: PICMG® HPM.1 R1.0 Order Information: PCIe bridge: PCISIG® PCIe spec. R.1.0a Designation order no. Process interfaces: AMC-ADIO24 8x AIN, 2x AOUT, 24x DIO, 4x trigger U.1001.01 I/O control: FPGA Spartan® II Analog inputs: 8 inputs, ±10 V, 16-bit resolution, up to 200 kHz sampling rate Analog outputs: 2 outputs, ±10 V, 16-bit resolution, up to 600 kHz update rate Digital I/Os: 24 I/Os, TTL level , programmable as input only, output sink, output source, output sink/source, max. current/ channel: 64 mA sink, 32 mA source, up to 1 MHz input sampling rate, up to 1 MHz output update rate Trigger ports: 4 RS-485 ports, trigger/sync, max. 1 MHz General: Dimensions: mid-height, single-width (73.5 x 180 mm) AMC Ambient temp.: 0 ...+70 °C (free convection) Humidity: max. 90%, non-condensing Power supply: 3.3 V (I3.3VMPMAX= 60 mA), 12 V (I12VTYPICAL = 0.6 A, I12VMAX= 1.0 A) Connectors: J1: AMC B/B+ compatible (MicroTCATM) For further information please visit P1 ... P7: 10-pin har-link (I/Os) http://www.esd-electronics-usa.com/AMC-CAN-Interfaces.html LEDs: blue (hot plug), red (IPMI), green (OK) esd electronics, Inc. Phone: 800-732-8006 Fax: 800-732-8093 Web: http://www.esd-electronics-usa.com Email: us-sales@esd-electronics.com