esd electronics, inc. H A R D W A R E • S O F T W A R E • E N G I N E E R I N G CAN-Control-I/O 64 Digital Inputs and 32 Digital Outputs • Microcontroller 80C592 • CAN interface acc. to ISO 11898, without electrical isola- CAN-Control-I/O tion, bit rate up to 1 Mbit/s • 32 digital outputs 12V or 24V, load 0.65...1.2A, short circuit and overload protection • 64 digital inputs 24V, electrically isolated • Combicon-style connectors • Suitable for CANOpen and J1939. For further information please visit http://www.esd-electronics-usa.com/CAN IO Series.html CAN I/O in 19” Plug-In Case The CAN-Control-I/O is a digital I/O module in a 19” plug-in case. The power supply is 24 V/DC. All connectors are acces- Digital Outputs sible at the front panel. The design of the 32 digital outputs allows switching from 24 V to GND with the protection against over-temperature and short circuit, also allowing generation & sending of an error mes- CAN Interface sage at the CAN bus. The module monitors the supply voltage The fully ISO11898 compliant module uses an 80C592 micro- of the output drivers by the analog inputs of the 80C592 micro- controller to control the inputs and outputs. The program code controller with the determined value read by CAN. is stored in a Flash EPROM and the parameters in an I²C EE- PROM with an optional SRAM available. The coding switch at the front panel allows setting a default value of the CAN identi- Software Support fier with the default bit rate set at a jumper field inside the case The local software of the module supports the transparent with bit rates selected between 10 kbit/s and 1 Mbit/s. The reading of the inputs and the error status. Additionally, the soft- CAN bus signals are not opto-isolated from the microcontroller. ware offers functions for the configuration of the module and makes the output setting possible through writing one identi- fier. Digital Inputs Designed for 24 V, the opto-isolated 64 inputs connect via a growing with the combicon-style connector. Each 8 inputs use one GND. challenge Phone: 800-732-8006 • Fax: 800-732-8093 • Web: http://www.esd-electronics.us • Email: us-sales@esd-electronics.com esd electronics, inc. H A R D W A R E • S O F T W A R E • E N G I N E E R I N G CAN-Control-I/O 64 Digital Inputs and 32 Digital Outputs • Microcontroller 80C592 • CAN interface acc. to ISO 11898, without electrical isola- tion, bit rate up to 1 Mbit/s CAN-Control-I/O • 32 digital outputs 12V or 24V, load 0.65...1.2A, short circuit and overload protection • 64 digital inputs 24V, electrically isolated • Combicon-style connectors • Suitable for CANOpen and J1939. For further information please visit http://www.esd-electronics-usa.com/CAN IO Series.html Technical Specifications Protection: against short circuit and overload Microcontroller and CAN section: (thermal) Microcontroller: 8xC592, 16 MHz Error messages: in case of over current, over tem- Memory: Flash EPROM, I²C EEPROM, perature, low supply voltage SRAM as an option General: CAN interface: acc. to ISO11898, no electrical Ambient temperature: 0...50o C isolation, Humidity: max. 90 %, non-condensing bit rate up to 1 Mbit/s Connector types: combicon-style connectors Digital inputs: Case dimensions: 19” x 1 HE x 250 mm Number: 64 Power supply: 24 V/DC, approx. 1.5 W Input voltage: max. permissible: -30 V £ UIN £ 33 V Switching threshold: ‘0’ : UIN < 9 V, ‘1’ UIN > 15 V Electrical isolation: by optocouplers, Order Information each 8 inputs use one common GND Designation Order no. Digital outputs: CAN-Control-I/O 64 digital inputs, 32 C.2071.01 digital outputs Number: 32, in groups with 8 outputs each Driver supply voltage: UVCC = 9.5 V/DC ... 35 V/DC CAN-Control-I/O-CON Set of connector plugs C.2071.11 Load (24 V/50 /C): 0.65 A ... 1.2 A CAN-Control-I/O-ME English users’ manual C.2071.21 esd electronics, Inc. Phone: 800-732-8006 Fax: 800-732-8093 Web: http://www.esd-electronics.us Email: us-sales@esd-electronics.com