VLT130 Series 130W single and quad output AC/DC Power Supplies High density and high efficiency are featured in the VLT130 AC/DC power supply. EOS Features : brand VLT130 family of power supplies utilize our patented resonant technology in a slim line 5.0”x3.14”x1.025” package and 82% power conversion efficiency. Single and quad out-  130 W fan cooled rat- puts in all popular DC output configurations are available ranging from 3.3v to 48v and sin- ing. gle wire current share.  Smallest 130W Ac/Dc Packing over 8 watts per cubic power Supply inch the dual-channel VLT130  Small 5.0x3.14x1.025 family is ideal for data network- inch form factor. ing, industrial and multimedia applications. VLT130 has auto  Dual channel output ranging 90v to 264v input and  EN61000-3-2 class A meets EN55022-B, FCC Part harmonics. 15 Level B Noise and Class 2 safety approvals. The VLT130  EN55022 and FCC Part family is RoHs compliant and 15 Level B our factory is ISO 14001 envi-  Cover Kit accessory ronmentally approved. World- available. wide safety standards apply and the power supply is fitted with OVP and OCP standard features as well as 1+1 redun- dancy and harmonic correction. Model Number Output Output Set Current Current INPUT SPECIFICATION Voltage Point No Fan 15CFM AC Input Auto Ranging 90 to 132V 180 to 264V 2 VLT130-1106 V1 3.3V 3.3V 20.0A 32.0A Efficiency 82% Typical 2 VLT130-1100 V1 5V 5.1V 16.0A 25.5A 2 VLT130-1101 V1 12V 12.0V 6.6A 10.8A Input Frequency 47-63 Hz 2 VLT130-1102 V1 15V 15.0V 5.4A 8.7A Input Current Full Load at low 2.9Arms , max line 2 VLT130-1103 V1 24V 24.0V 3.3A 5.4A Inrush Current High Line , cold 40A,max 2 VLT130-1104 V1 48V 48.0V 1.7A 2.7A start VLT130-4100 V1 5V 5.1V 10.0A 14.0A V2 3.3V 3.3V 10.0A 16.0A V3 12V 12.7V 1.0A 1.5A V4 -12V -12.7V 1.0A 1.5A VLT130-4101 V1 5V 5.1V 10.0A 14.0A V2 3.3V 3.3V 10.0A 16.0A V3 24V 24.0V 1.0A 1.5A V4 -12V -12.7V 1.0A 1.5A VLT130-4102 V1 5V 5.1V 10.0A 14.0A V2 3.3V 3.3V 10.0A 16.0A V3 15V 16.3V 1.0A 1.5A V4 -15V -16.3V 1.0A 1.5A VLT80CK Metal cover kit accessory All EOS power supplies have UL, CSA and Nemko safety compliance and medical versions meet UL60601-1 standards. All our products are RoHs compliant. Visit us at www.eospower.com. EOS brand power supplies and patents are owned exclusively by EOS Power. All Rights Reserved. 4EM-10-0XX Page 139-DE60-44063-002/A2 VLT130 Series 130W single and quad output AC/DC Power Supplies OUTPUT SPECIFICATION ENVIRONMENTAL SPECIFICATION 4.5 o Output Power All Outputs No Fan 80W max Operating Tem- No derating 0 to 50 C All Outputs with Fan 130W max perature o DC Output See Table Storage -40 to 85 C Temperature Hold-Up Time 115V/230V 10ms Cooling Convection 80W Set Point Accuracy V1 and V2 +1% V3 and V4 +5% Relative humidity Non condensing 95%, max Line Regulation Low line to high line +0.3% Load Regulation Mini to 50% & MTBF Bellcore TR332 >150,000 hrs 50% Max Load +1% V1 and V2 +5% V3 and V4 EMC AND SAFETY SPECIFICATIONS Minimum Load CE Mark Complies with the LVD Single o/p models; 3.3V & 5V 3A Other models V1 & V2 0.5A EMC EN5022-B,CISPR22-B, V3 & V4 0.1A FCC Part 15 Class B, EN50082-1 Transient Response 50% to Full Load to full load Voltage deviation <7% Agency Approval VDE , UL, c-UL Recovery Time <1ms Safety Standard IEC60950,EN60950, OVP 3.3V Output 5.1V, +0.5V UL60950, Class 1 SELV 5V Output 6.2V,+0.4V Safety File Number VDE: 18934-3336 Overload Protection Primary limited 195W,+35W UL: E150565 Short Circuit Protec- Auto recovery <6s Short Term tion Ripple and Noise 3.3V & 5V 50mV Other voltages 1% 2 Power Fail Signal TTL 2ms warning Remote Sense Line compensation 400mV on V1 and V2 2 Power Good Delay after V1 high 30ms, min Output Rise Time <10ms Redundancy 130W Max 1+1 Paralleling Function No All EOS power supplies have UL, CSA and Nemko safety compliance and medical versions meet UL60601-1 standards. All our products are RoHs compliant. Visit us at www.eospower.com. EOS brand power supplies and patents are owned exclusively by EOS Power. All Rights Reserved. 4EM-10-0XX Page 239-DE60-44063-002/A2 VLT130 Series 130W single and quad output AC/DC Power Supplies MECHANICAL SPECIFICATION INPUT CONNECTOR J1 AC Input Connector J1 Molex 3 position, 0.156 center Pin1 Neutral Header 26-60-4030 or equivalent Pin2 Line Ground Connector Spade connector. DC Output connector J2 Tyco 282841-6 terminal block or equivalent Output connector J3 Molex22-23-2081 or equivalent INPUT SPADE CONNECTOR Size 5.0x3.14x1.025” GND AC Ground Weight 12oz (340g) OUTPUT CONNECTOR J2 OUTPUT CONNECTOR J3 Single Output Quad Output Single Output Quad Output Pin1 No Connection V3 Pin1 V1 Current Share V2 Current Share Pin2 V1B V3 Pin2 V1 Current Share V1 Current Share Pin3 Dc Return DC Return Pin3 No Connection Power Fall Pin4 Dc Return Dc Return Pin4 Common Common Pin5 -V1A Sense -V1 Sense Pin5 V1A V1 Pin6 No Connection V4 Pin6 +V1A Sense +V1 Sense Pin7 +V1B Sense +V2 Sense Pin8 -V1B Sense -V2 Sense Note: 1. Maximum current per output. Do not ex- ceed maximum output power rating. 2. Power good and Power Fail signal on quad output models only. 3. The use of the Remote Sense function required 15CFM airflow. 4. Quad output Models: The output section of the VLT130-4XXX is split into 2 inde- pendently regulated channels. Channel A consists of the main output V1 and auxil- iary output v4. channel B consist of the main output V3 and auxiliary output V3. The maximum output power that may be drawn per channel is 45W with convection cooling or 65W with fan cooling. 5. Single output models: The output section of the VLT130-1XXX is split into 2 inde- pendently regulates channels. Channel A consist of the main output V1A. Channel B consist of the main output V1B. An internal shunt resistor of value 0 ohms connect both channels of the power supply. In an event whereby this shunt resistor is re- moved, the maximum output power that may be drawn per channel is 45W with convection cooling or 65W with fan cool- ing. All EOS power supplies have UL, CSA and Nemko safety compliance and medical versions meet UL60601-1 standards. All our products are RoHs compliant. Visit us at www.eospower.com. EOS brand power supplies and patents are owned exclusively by EOS Power. All Rights Reserved. 4EM-10-0XX Page 339-DE60-44063-002/A2