16502.9013636-1_10GBase_DS.qxd 9/10/04 10:21 AM Page 1 10-Gigabit Ethernet Interface Modules for the X-Pedition™ and Matrix™ Platforms • Standards-based support for 10GBASE-XX Ethernet • Hot swappable; plugs into a 10-Gigabit Ethernet XENPAK port of X-Pedition core routers and Matrix switches • Provides flexible, automatic recognition of interface for connectivity to single-mode fiber or multimode fiber networks • Standards based, supports When designing network infrastructures Interface Modules Available 10GBASE-XX Ethernet using the capabilities of 10-Gigabit 10GBASE-SR—850 Nanometer serial — Uniform form factor, size, Ethernet, it is important to carefully port for 10-Gigabit Ethernet over multimode connector type and consider the cabling type (e.g., single-mode fiber (MMF) via an SC connector. Supports electric pin outs ensure or multimode fiber) and the performance link lengths ranging from 26 meters to compatibility at a specified wavelength. The performance 300 meters depending on grade of fiber • Hot-swappable input/output is characterized by channel insertion loss installation. device (cabling attenuation) and modal bandwidth — Plugs into a 10-Gigabit 10GBASE-LR—1310 Nanometer serial (for multimode fiber). Ethernet XENPAK port on port for 10-Gigabit Ethernet over single-mode X-Pedition core routers Providing a wide variety of 10-Gigabit fiber (SMF) via an SC connector. S u p p o r t s and Matrix switches Ethernet connectivity options, the 10GBASE 10-Gigabit Ethernet transmission over — P rovides flexible, automatic X E N PAK interface modules for the distances between 2 Km and 10 Km. recognition of interface for X-Pedition and Matrix are suitable for use connectivity to single-mode 10GBASE-ER—1550 Nanometer serial across a range of applications, including fiber or multimode fiber port for 10-Gigabit Ethernet over single-mode networks the data center and extending out to fiber (SMF) via an SC connector. Supports the enterprise wiring closet. These high- • Increases return on “long-haul” 10-Gigabit Ethernet trans- investment performance interface modules provide mission over distances between 2 Km and the fastest connectivity available to any — Supports a modular approach to network 40 Km. other IEEE 802.3ae standards-compliant connectivity, ensuring you device. 1 0 G B A S E - L X 4— 4 channel WWDM- pay only for what they require based transceiver operating within the All 10-Gigabit Ethernet interfaces are 1310nm range for distances up to 300 based upon the XENPAK Multi-source meters (MMF) or 10 Km (SMF) via and SC Agreement (MSA). This MSA defines a c o n n e c t o r. Supports “long-haul” 10-Gigabit f i b e r-optic transceiver module, which Ethernet transmission over distances conforms to the IEEE 802.3ae 10-Gigabit between 2 Km and 40 Km. The use of a Ethernet (10 GbE) standard and includes mode-conditioning patch cord on multimode all physical media dependent (PMD) types fiber to achieve its specified range of oper- defined by the IEEE for 802.3ae 10 GbE. a t i n g distances is required. Page 1 of 4 • Data Sheet 16502.9013636-1_10GBase_DS.qxd 9/10/04 10:21 AM Page 2 Specifications Cabling Specifications XENPAK Wavelength Fiber Type Core Size Modal Bandwidth Cable (nm) (micron) (MHz/km) Distance 1 0 G B A S E - L R 1 3 1 0 S M F 8 . 3 / 9 / 1 0 N/A 2 km–10 km 1 0 G B A S E - E R 1 5 5 0 S M F 8 . 3 / 9 / 1 0 N / A 40 km 1 0 G B A S E - S R 8 5 0 M M F 6 2 . 5 1 6 0 26 m 6 2 . 5 2 0 0 33 m 5 0 4 0 0 66 m 5 0 5 0 0 82 m 5 0 2 0 0 0 300 m 1 0 G B A S E - L X 4 1 3 0 0 M M F 6 2 . 5 5 0 0 300 m 5 0 4 0 0 240 m 5 0 5 0 0 300 m S M F 1 0 N / A 10 km Per the IEEE 802.ae specification, the minimum cabling distance for all models is 2 m. The ER optics require 5db of attenuation if run on cable of less than 10 km. Cabling Specifications XENPAK Transmit Power (dBm) Receive Power (dBm) Transmit and Receive Max Min Max Min Wavelength (nm) XENPAK Max 1 0 G B A S E - L R . 5 - 3 . 6 . 5 - 1 4 . 4 1290 to 1330 1 0 G B A S E - E R 4 . 0 - 1 . 0 1530 to 1565 1 0 G B A S E - S R - 4 . 3 - 7 . 1 840 to 860 1 0 G B A S E - L X 4 -.05 per lane -.05 per lane Four lanes with overall range: 1269 to 1356 Page 2 of 4 • Data Sheet 16502.9013636-1_10GBase_DS.qxd 9/10/04 10:21 AM Page 3 Specifications Technical Specifications Storage Temperature 10GBASE-LR: -40° C to 80° C (-40° F to 176° F) Completely integrated Ethernet PHYs 10GBASE-ER: -40° C to 85° C (-40° F to 185° F) True hot-swappable capabilities 10GBASE-SR: -55° C to 125° C (-67° F to 257° F) Built-in XAUI backplane transceivers 10GBASE-LX4: -40° C to 85° C (-40° F to 185° F) Physical Specifications Agency and Standards Specifications Dimensions Safety 2.24 cm (.88") H x 11.52 cm (4.53") UL 60950, CSA 60950, EN 60950, EN 60825 and IEC D x 6.13 cm (2.41") W (from the front) 60950 2.24 cm (.88") H x 11.52 cm (4.53") Electromagnetic Compatibility D x 3.60 cm (1.42") W (from the rear) 47 CFR Parts 2 and 15, CSA C108.8, EN 555022, EN Environmental Specifications 55024, EN 61000-3-2, EN 61000-3-3, AS/NZS CISPR Operating Temperature 22, and VCCI V-3 10GBASE-LR: 0° C to 55° C (32° F to 131° F) 10GBASE-ER: 0° C to 70° C (32° F to 158° F) 10GBASE-SR: 0° C to 70° C (32° F to 158° F) 10GBASE-LX4: 0° C to 70° C (32° F to 158° F) Ordering Information 10GBASE-SR 850 Nanometer serial port for 10-Gigabit Ethernet over multimode fiber (MMF) via an SC connector 10GBASE-LR 1310 Nanometer serial port for 10-Gigabit Ethernet over single-mode fiber (SMF) via an SC connector 10GBASE-ER 1550 Nanometer serial port for 10-Gigabit Ethernet over single-mode fiber (SMF) via an SC connector 10GBASE-LX4 4 channel WWDM-based transceiver operating within the 1310 nm range for distances up to 300 meters (MMF) or 10 Km (SMF) via an SC connector Page 3 of 4 • Data Sheet 16502.9013636-1_10GBase_DS.qxd 9/10/04 10:21 AM Page 4 Warranty As a customer-centric company, Enterasys is committed to providing the best possible workmanship and design in our product set. In the event that one of our products fails due to a defect in one of these factors, we have developed a comprehensive warranty that protects you and provides a simple way to get your products repaired as soon as possible. Service and Support Enterasys understands that superior service and support is ™ a critical component of Networks that Know. The Enterasys SupportNet Portfolio—a suite of innovative and flexible service and support offerings—completes the Enterasys solution. SupportNet offers all the post-imple- mentation support services you need—online, onsite or over the phone—to maintain your network availability and performance. Additional Information For additional information on the Matrix, visit e n t e r a s y s . c o m / products/switching. For additional information on the X-Pedition, visit enterasys.com/products/routing Contact Information Contact Enterasys Sales at 877-801-7082 or e n t e r a s y s . c o m / c o r p o r a t e / c o n t a c t / c o n t a c t - s a l e s . h t m l Enterasys Networks Corporate Headquarters 50 Minuteman Road Andover, MA 01810 U.S.A. X-Pedition, Matrix and NetSight are trademarks or re g i s t e red trademarks of Enterasys Networks. All other products or services mentioned are identified by the trademarks or service marks of their respective companies or organizations. NOTE: Enterasys Networks reserves the right to change specifications without notice. Please contact your representative to confirm current specifications. All contents are copyright © 2004 Enterasys Networks, Inc. All rights re s e r v e d . Lit. #9013636-1 9/04 Page 4 of 4 • Data Sheet