Manufacturers
EMERSON MVME6100
Description
Emerson MVME6100 VMEbus Single-Board Computer - MPC7457 PowerPC processor @ 1.267GHz, Up to 1GB on-board DDR ECC Memory, Dual Gigabit Ethernet
Part Number
MVME6100
Price
Request Quote
Manufacturer
EMERSON
Lead Time
Request Quote
Category
PRODUCTS - M
Specifications
Address/Data
A32/D32/D64
A32/D32/D64, PMC PN1, PN2, PN3, PN4 connectors
Arbiter
RR/PRI
Async Baud Rate, b/s max.
38.4K EIA-232, 115Kb/s raw
Capacity
128MB soldered Flash in two banks of 64MB each
32KB (4KB available for users)
Up to 2GB, all memory on board
Cell Capacity Life
5 years at 100% duty cycle, 25° C
Cell Storage Life
50 years at 55° C
Clock Frequency
1.267 GHz
Compliance
ANSI/VITA 1-1994 VME64 (IEEE STD 1014), ANSI/VITA 1.1-1997 VME64 Extensions, VITA 1.5-199x 2eSST
Configuration
EIA-574 DTE
Connector
114-pin connector located on MVME6100 planar, same location as on MVME5500 planar
One routed to front panel RJ-45; one on planar for development use
Controller
Ethernet controller integrated into host bridge; two Gigabit Ethernet interfaces
ST16C554DCQ64
Tundra Tsi148
Depth
160.0 mm (6.3 in.)
DTB Master
A16, A24, A32, A64; D08-D64, SCT, BLT
DTB Slave
A16, A24, A32, A64; D08-D64, SCT, BLT
Front Panel Height
261.8 mm (10.3 in.)
Height
233.4 mm (9.2 in.)
Interface Speed
10/100/1000Mb/s
Interrupt Handler/Generator
IRQ 1-7/Any one of seven IRQs
L3 Cache
2MB
Location Monitor
Two, LMA32
Max. Component Height
14.8 mm (0.58 in.)
Memory Configurations
Two banks, 512MB or 1GB configurations
Microprocessor
MPC7457
Module Types
Two single-wide or one double-wide, front panel or P2 I/O, PMC and PrPMC support
Number of Ports
Two, 16550 compatible
On-chip L1 Cache (I/D)
32K/32K
On-chip L2 Cache
512K
PCI Bus Clock
33 MHz, 66 MHz or 100 MHz
33/66 MHz
Power
+3.3V, +5V, ± 12V
+3.3V, +5V, ±12V
Processor
Motorola MPC7457
Removable Battery
Yes
Signaling
3.3V, 5V tolerant
5V
Speed
DDR266 (133 MHz)
System Controller
Marvell MV64360
Yes, jumperable or auto detect
Timers/Counters
Four, 32-bit programmable
TOD Clock Device
ST (SGS-Thompson) M4T28 Real-Time
Type
Double data rate (DDR) ECC SDRAM
EEPROM, on-board programmable
Watchdog Timer
Time-out generates reset
Weight
425 g/15 oz. (Scanbe handles); 468 g/16.5 oz. (IEEE handles)
Width
19.8 mm (0.8 in.)
Write Protection
Flash is write protectable via jumper
Features
- 128-bit AltiVec coprocessor for parallel processing, ideal for data-intensive applications
- 2eSST VMEbus protocol with 320MB/s transfer rate across the VMEbus
- Dual Gigabit Ethernet interfaces for high performance networking
- MPC7457 PowerPC® processor running at up to 1.267 GHz
- Two 33/66/100 MHz PMC-X sites allow the addition of industry-standard, applicationspecific modules
- Up to 2GB of on-board DDR ECC memory and 128MB of flash memory for demanding applications
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the MVME6100 have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
Emerson MVME31006E-1152 CPU Boards. VMEbus 6U VME PowerPC e500 | Freescale MPC8540 Processor 667 MHz...
Emerson MVME51105E-2163 VMEbus Processor Module - 400 MHz MPC7410, 512MB ECC SDRAM, 17MB flash and 2...
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods