MVME4100 Series VMEbus Single-Board Computer Front page The MVME4100 single-board computer from Emerson Network Power incorporates The MVME4100 is designed for the fastest Freescale 8548E processor, industry-leading storage options, extensive a broad range of applications I/O and flexible expansion options including an on-board PMC site and up to four including industrial optional XMC sites via expansion cards. automation, imaging, radar and sonar. The MVME4100, with the Freescale MPC8548E system-on-chip (SoC) processor, Interior page provides a high-performance, cost-effective continuation for currently deployed VME n 1.3 GHz system-on-chip infrastructure. The Freescale e500 core coupled with the current operating systems Freescale MPC8548E with allows for double precision floating point operations. In addition, the processor-enabled e500 processor core, double supplementary encryption engine can be leveraged to address new opportunities precision floating point meeting the ever-growing demands for network privacy and data security. operations, integrated memory controller, DMA engine, PCI-X The MVME4100 memory and storage options raise the bar in the embedded and PCI Express interface, computing market. 2GB of DDR2 RAM is provided in SO-DIMM format. Innovative Ethernet, and local I/O MRAM is included for truly non-volatile memory. Also included are 4GB of NAND flash, which can take the place of some rotating media or removable flash, while n Extended temperature (-40 °C offering improved performance and life cycle. to +71 °C) n 2GB of DDR2 ECC memory, High speed 2eSST protocol and extensive I/O – four Gigabit Ethernet ports, five serial 128MB NOR flash and 4GB ports, USB and PMC/XMC sites – round out the MVME4100 to provide maximum NAND flash performance and flexibility. n 512KB of MRAM non-volatile memory Extended temperature (-40 °C to +71 °C) variants support a wide range of operating and storage temperatures in addition to increased tolerances for shock. This enables n Four Gigabit Ethernet ports the boards to operate in harsh environments while maintaining structural and opera- n Five serial ports tional integrity. n USB 2.0 controller for integrating cost-effective peripherals (commercial temperature only) n 2eSST VMEbus protocol with 320MB/s transfer rate across the VMEbus n Board support packages for VxWorks and Linux n Dual 33/66/100MHz PMC sites for expansion via industry standard modules with support for processor PMCs n 8x PCI/PCI-X expansion connector for PMC/XMC expansion using Emerson XMCspan carrier n MVME7216E direct-connect rear transition module (RTM) for I/O routing through rear of VMEbus chassis Front page Interior page MVME4100 Block Diagram ABT/RST PMC1 Front I/O PMC2 Front I/O USB* GbE GbE COM RJ-45 RJ-45 Front Panel Up to 2GB PHY XCVR DDR2 Memory RS-232 5482 SO-CDIMM DDR2 MC DUART User RTC VPD GbE 1 128KB DS1375 8KB TSEC1 GbE 2 2 TSEC2 I C MPC8548E GbE 3 Device Processor TSEC3 CPLD Temp Bus GbE 4 Decode ADT7461 TSEC4 LBC Timers/Regs OR MAX6649 PCI-E PCI-X Serial Ports 1-4 QUART Flash NAND MRAM 16C554 128MB Flash 512KB XMCspan PHY 5482 PCI-X Bridge PCI-X Bridge PCI6520 PCI6520 USB* VME µPD720101 TSi148 XCVR PMC 1 PMC 2 22501 VME Bus XCVR RS-232 2 GbE 3 GbE 4 COM2 – COM5 PMC 1 Jn4 IO I C Bus P2 P1 * Commercial temperature only Overview to 1.3 GHz, is well-suited for I/O and data-intensive ap- plications. The integrated SoC design creates an I/O VMEBuS 2ESST PErforManCE intensive state-of-the-art package that combines a The 2eSST protocol offers an available VME bus low power processing core with on-chip L2 cache and bandwidth of up to 320MB/s, an increase of up to 8x an integrated DDR2 memory controller, PCI Express, over VME64, while maintaining backward compatibil- DMA , Ethernet and local device I/O. The on-chip PCI ity with VME64 and VME32. The combination of the Express interface and DDR2 memory buss are well latest Texas Instruments VMEbus transceivers and the matched to the processor. To ensure optimal I/O Tundra Tsi148 VMEbus bridge’s legacy protocol performance, the MVME4100 also offers quad Gigabit support allows customers to integrate the MVME4100 Ethernet interfaces, USB 2.0 (commercial temperature series into their existing infrastructure providing only), and five (5) RS-232 serial connections. All of this backward compatibility and thereby preserving their adds up to a set of well-balanced, high-performance investment in existing VMEbus boards, backplanes, subsystems offering unparalleled performance. chassis and software. BalanCEd PErforManCE The MVME4100 series provides more than just faster VMEbus transfer rates; it provides balanced perfor- mance from the processor, memory subsystem, local buses and I/O subsystems. This coupled with a wealth of I/O interfaces make the MVME4100 series ideal for use as an application-specific compute blade, or an intelligent I/O blade/carrier. The Freescale MPC8548E system-on-chip (SoC) processor, running at speeds up 2 Front page Interior page Backward Compatibility flaSh MEMory ƒ NOR flash, on-board programmable PCI ExPanSIon c Capacity: 128MB The MVME4100 has an 8x PCI Express connection to support PCI Express expansion carriers such as the c Write Protection: Hardware via switch, software Emerson XMCSPAN-001 or XMCSPAN-002. via register or sector lock ƒ NAND flash, on-board programmable TranSITIon ModulES c Capacity: 4GB The MVME7216E transition module provides industry- c Write Protection: Software via register standard connector access to two 10/100/1000BaseT ports, and four asynchronous serial ports configured non-VolaTIlE MEMory as EIA-232 DTE. All of these are via RJ-45 connectors. ƒ SEEPROM, on-board programmable The MVME7216E RTM is designed to directly connect c Capacity: 128KB (available for users), 8KB base- to the VME backplane in chassis’ with an 80mm deep board Vital Product Data (VPD) rear-transition area. ƒ MRAM Software Support c Capacity: 512KB fIrMwarE MonITor VMEBuS InTErfaCE The MVME4100 firmware (known as MOTLoad) is ƒ Compliance: ANSI/VITA 1-1994 VME64 (IEEE STD resident in the MVME4100 flash and provides power 1014), ANSI/VITA 1.1-1997 VME64 Extensions, VITA on self-test (POST enhancements available after 1.5-199x 2eSST release), initialization and operating system booting ƒ Controller: Tundra Tsi148 PCI-X to VMEbus bridge capabilities. In addition, it provides a debugger with support for VME64 and 2eSST protocols interface similar to the time proven “BUG” interface ƒ DTB Master: A16, A24, A32, A64; D08-D64, SCT, on previous VMEbus boards from Emerson. BLT, MBLT, 2eVME, 2eSST oPEraTIng SySTEMS and KErnElS ƒ DTB Slave: A16, A24, A32, A64; D08-D64, SCT, BLT, MBLT, 2eVME, 2eSST, UAT The MVME4100 series supports booting a variety of operating systems including a complete range of ƒ Arbiter: RR/PRI real-time operating systems and kernels. ƒ Interrupt Handler/Generator: IRQ 1-7/Any one of seven IRQs Specifications ƒ System Controller: Yes, switchable or auto detect ProCESSor ƒ Location Monitor: Two, LMA32 ƒ Microprocessor: Freescale MPC8548E with EThErnET InTErfaCE e500 core ƒ Controller: MPC8548E Triple Speed (TSEC) ƒ Clock Frequency: 1.3 GHz Ethernet Controllers ƒ On-chip L1 Cache (I/D): 32K/32K ƒ Interface Speed: Four @ 10/100/1000Mbps (TSEC) ƒ On-chip L2 Cache: 512KB ƒ Connector: Two Gigabit Ethernet ports routed to front panel RJ-45, two Gigabit Ethernet ports SySTEM ConTrollEr to VMEbus P2 connector, pin out matching ƒ Integrated within MPC8548E MVME7216E RTM ƒ Indicators: Link status/speed/activity MaIn MEMory ƒ Double data rate (DDR2) SDRAM with ECC c Speed: DDR2-533 c Capacity: 2GB c Form: SO-DIMM 3 Front page Interior page aSynChronouS SErIal PorTS ƒ Real-Time Timers/Counters: Four, 32-bit program- mable timers in PLD; four, 32-bit programmable/ ƒ Port 1 cascadable timers in MPC8548E c Controller: MPC8548E DUART (second port N/C) ƒ Watchdog Timer: In PLD c Number of Ports: One 16550 compatible c Configuration: EIA-232 DTE (RxD, TxD, RTS, CTS) Board SIzE and wEIghT c Async Baud Rate, b/s max.: 38.4K RS-232, ƒ Height: 233.4 mm (9.2 in.) 115Kbps raw ƒ Depth: 160.0 mm (6.3 in.) c Connector: One front panel micro DB-9 ƒ Front Panel Height: 261.8 mm (10.3 in.) c Micro DB-9 to DB-9 adapter cable: SERIAL-MINI-D2 ƒ Width: 19.8 mm (0.8 in.) ƒ Ports 2-5 ƒ Max. Component Height: 14.8 mm (0.58 in.) c Controller: Exar ST16C544D QUART ƒ Weight: TBD (IEEE handles) c Number of Ports: Four 16550 compatible PowEr rEquIrEMEnTS c Configuration: EIA-232 (RxD, TxD, RTS, CTS) (Not including power required by PMC or IPMC c Async Baud Rate, b/s max: 38.4K RS-232, modules) 115Kbps raw c Connector: Via VMEbus P2 connector, pinout Board Variant Power matching MVME7216E RTM MVME4100-0171 Typical: 18 W at +5 V ƒ USB Interface (commercial temperature only) Maximum: 22 W at +5 V c Controller: NEC µ720101 MVME4100-0173 Typical: 18 W at +5 V c Configuration: USB 2.0 Maximum: 22 W at +5 V c Number of ports: One c Connector: One powered port routed to CalCulaTEd MTBf front panel ƒ TBD dual IEEE P1386.1 PCI MEzzanInE Card SloTS oThEr fEaTurES ƒ Address/Data: A32/D32/D64, PMC PN1, PN2, PN3, ƒ RoHS compliant PN4 connectors (PN4 for PMC1 only) ƒ Jumper-less configuration ƒ PCI Bus Clock: 33 MHz, 66 MHz or 100 MHz PCI/ ƒ On-board temperature sensor PCI-X ƒ JTAG header for connection of diagnostic tools ƒ Signaling: +3.3V, +5V ƒ Power: +3.3V, +5V, ±12V fronT PanEl ƒ Module Types: Two single-wide or one double- ƒ IEEE or SCANBE handles wide, front panel or P2 I/O, PMC and PrPMC ƒ Connectors for serial, 2x Gigabit Ethernet and support, PMC1 site Pn4 routed to VMEbus P2 USB port (commercial temperature only) connector rows A and C ƒ Openings for PMC sites PCI ExPanSIon ConnECTor for InTErfaCE To ƒ Reset switch xMCSPan BoardS ƒ Status LEDs ƒ 8x PCI Express interface ƒ One 76-pin connector located on MVME4100 planar CounTErS/TIMErS 2 ƒ TOD Clock Device: Maxim DS1375 I C device with battery backup ƒ Cell Storage Life: 10 years at 25 °C ƒ Cell Capacity Life: One year at 100% duty cycle, 25 °C ƒ Removable Battery: Yes 4 Front page Interior page Transition Modules All Modules I/o ConnECTorS EnVIronMEnTal ƒ MVME7216E Commercial -ET Cooling Method: Forced Air Forced Air c Asynchronous Serial Ports: Four, RJ-45, labeled as COM2-5 Operating 0 °C to +55 °C –40 °C to +71 °C Temperature: c Ethernet: Two 10/100/1000BaseTX, RJ-45 Storage –40 °C to +85 °C –50 °C to +100 °C Temperature: non-VolaTIlE SToragE Vibration Sine: 1G, 5 - 200 Hz 1G, 5 - 200 Hz* ƒ 8KB VPD SEEPROM Vibration N/A TBD* Board SIzE Random: ƒ Height: 233.4 mm (9.2 in.) Shock: N/A 20g/11mS* ƒ Depth: 80.0 mm (3.1 in.) Humidity: 5% to 90% RH to 100% RH ƒ Front Panel Height: 261.8 mm (10.3 in.) Conformal Optional Optional Coating: ƒ Front Panel Width: 19.8 mm (0.8 in.) *Final ET shock and vibration capabilities TBD. Values shown are minimums. CalCulaTEd MTBf ƒ TBD SafETy All printed wiring boards (PWBs) are manufactured with a flammability rating of 94V-0 by UL recognized manufacturers. ElECTroMagnETIC CoMPaTIBIlITy (EMC) ƒ Intended for use in systems meeting the following regulations: c U.S.: FCC Part 15, Subpart B, Class A (non-residential) c Canada: ICES-003, Class A (non-residential) ƒ Emerson board products are tested in a representa- tive system to the following standards, results pending: c CE Mark per European EMC Directive 89/336/EEC with Amendments; Emissions: EN55022 Class B; Immunity: EN55024 5 Front page Interior page Ordering Information Part Number Description MVME4100-0171 1.3 GHz MPC8548E, 4G NAND flash, 2G, SCANBE (ENP1) MVME4100-0173 1.3 GHz MPC8548E, 4G NAND flash, 2G, IEEE (ENP1) MVME4100ET-0171 Extended temperature –1.3 GHz MPC8548E, 4G NAND flash, 2G, SCANBE (ENP2) MVME4100ET-0173 Extended temperature –1.3 GHz MPC8548E, 4G NAND flash, 2G, IEEE (ENP2) Related Products XMCSPAN-001 XMC expansion, IEEE handles XMCSPAN-002 XMC expansion, SCANBE handles MVME7216E-101 Rear transition module Extended temp RTM, new NEW I/O on 5 row P2, two GbE, four serial, PIM, 6E (for MVME721ET-101 use with MVME3100/4100/7100) Extended temp RTM SCANBE, I/O on 5 row P2, two GbE, four serial, PIM, 6E (for use MVME721ET-102 with MVME3100/4100/7100) SERIAL-MINI-D2 Serial cable - Micro D sub connector to standard DB-9 ACC/CABLE/SER/DTE/6E Serial cable, RD 009, 2M, 2 DTE MD/D, RJ45 to DB9 SoluTIon SErVICES Emerson Network Power provides a portfolio of solution services optimized to meet your needs throughout the product lifecycle. Design services help speed time-to-market. Deployment services include global 24x7 technical support. Renewal services enable product longevity and technology refresh. PowerPC is a trademark of IBM Corp. and used under license. All other product or service names are the property of their respective owners. This document identifies products, their specifications, and their characteristics, which may be suitable for certain applications. It does not constitute an offer to sell or a commitment of present or future availability, and should not be relied upon to state the terms and conditions, including warranties and disclaimers thereof, on which Emerson Network Power may sell products. A prospective buyer should exercise its own independent judgment to confirm the suitability of the products for particular applications. Emerson Network Power reserves the right to make changes, without notice, to any products or information herein which will, in its sole discretion, improve reliability, function, or design. Emerson Network Power does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent or other intellectual property rights or under others. This disclaimer extends to any prospective buyer, and it includes Emerson Network Power’s licensee, licensee’s transferees, and licensee’s customers and users. Availability of some of the products and services described herein may be restricted in some locations. AC Power Embedded Power Precision Cooling Emerson Network Power. Connectivity Racks & Integrated Cabinets Infrastructure Management & Monitoring The global leader in enabling ™ DC Power Outside Plant Services Business-CriticalContinuity . Embedded Computing Power Switching & Controls Surge Protection Emerson Network Power Emerson, Business-Critical Continuity and Emerson Network Power are trademarks of Offices: Tempe, AZ U.S.A. 1 800 759 1107 or +1 602 438 5720 Emerson Electric Co. or one of its affiliated Paris, France +33 1 60 92 31 20 • Munich, Germany +44 1509 236490 • Tel Aviv, Israel +972 9 9560361 Hong Kong +852 2176 3540 • Shanghai, China +86 21 3395 0289 • Tokyo, Japan +81 3 5403 2730 • Seoul, Korea +82 2 3483 1500 companies. ©2011 Emerson Electric Co. EmersonNetworkPower.com/EmbeddedComputing MVME4100-D6 02/09/12